coolpad Surf CP331A need pin test pictures need to unlock it

[Dubr509]

i buy this modem coolpad i want to know if pin test to enable port diag for detected on devices manager my problem i need unlock this router by tool






betta fish aquarium care

[Rich Hathaway]

I worked on this device for a long time to unlock it and was able to unlock it or at least to get it to accept a non
tmobile sim card but it had some other probs after that plmn needed changed and apn of course, I got diag port and fastboot port via firmware load, I could not find any command to enable it but got it by firm mod, I will show you testpoints because if you are gong to start fooling around with it, you are going to need them because this device is easily borked. strangely I found it has different testpoints for 900E and 9008 modes.

900E bootpoint.jpg

9008 bootpoint.jpg

here are drivers for you

Coolpad Driver v2.01.rar

5.png

this is the apn file in the raw filesystem

APN.PNG

here is the control file which you will need to change also the ui is only eye candy




here is the address for the file you will need to edit

switch jump.PNG

here you can see the jumps for card state or aka runtime env. the default one is the one locked to tmobile/metro
however there is not another one for any usa carrier but it can be unlocked by redirect here. (thats not how I ended up unlocking it)

default jump.PNG

jumps.PNG

in my opinion its not worth unlocking the way I did it, its way to much work and still has issues with service, if you get/find some other way to unlock that would be good.
I also got unlock code for a couple of them from tmobile and then changed the imei and mac id on a different device to match that of one I got a code for then entered the same unlock code to see if that old trick would work and it did not work.
hope this helps you, good luck.

[Rich Hathaway]

This image did not post, to many uploaded I assume.

apn.PNG

also here are pid/vid this will make things easier for you manually loading drivers

qc usb composite device
USB\VID_05C6&PID_9057&REV_0318
USB\VID_05C6&PID_9057
------------------------------------------------
fastboot
USB\VID_1EBF&PID_7001&REV_0100
USB\VID_1EBF&PID_7001
==============================

USB\VID_05C6&PID_9025&REV_0318&MI_01
USB\VID_05C6&PID_9025&MI_01
------------------------------------------------------
diag 9025
USB\VID_05C6&PID_9025&REV_0318&MI_00
USB\VID_05C6&PID_9025&MI_00
----------------------------------------------------------
nmea
USB\VID_05C6&PID_9025&REV_0318&MI_03
USB\VID_05C6&PID_9025&MI_03
----------------------------------------------------------
modem
USB\VID_05C6&PID_9025&REV_0318&MI_02
USB\VID_05C6&PID_9025&MI_02
-----------------------------------------------------------
adb
USB\VID_05C6&PID_9025&REV_0318&MI_01
USB\VID_05C6&PID_9025&MI_01
----------------------------------------------------------
wwan
USB\VID_05C6&PID_9025&REV_0318&MI_04
USB\VID_05C6&PID_9025&MI_04

[Dubr509]

thank you sir for you answer first i'm not a a proagrammer i cannot edit files jumping and my second i try to unlock by other tool on the market he failed not modem coolpad actually bricked do you any solution to proposed to me how i can revive this modem any exe file can fix not port 9008 port on device manager i think when any touch ic qc he will bricked. thanks advanced.

[Rich Hathaway]

No not any exe, I can fix it for you but I do not have any one click tool, I can do it for you but manually only

[blacktech]

this is the closest i got to unlocking my 5 coolpad modem and i think im still lost

[XombieG]

No not any exe, I can fix it for you but I do not have any one click tool, I can do it for you but manually only

hi bro, how do you put on diag mode? i have a solution but need first read qcn can you explain, thanks

[edeleonp]

Greetings guys, have you found an easier solution to unlock this modem? I have one unlocked but I don't know how you did it or what tool you were able to unlock it with. Please write me on WhatsApp 8098057130 if you have any information on how to unlock it

[Rich Hathaway]

Greetings guys, have you found an easier solution to unlock this modem?

No maybe someone else has, I have no plans to do any more work on this device.

[XombieG]

Greetings guys, have you found an easier solution to unlock this modem?

No maybe someone else has, I have no plans to do any more work on this device.

can you share firmware if you have, and i do the rest and post all

[danish1162]

can someone share its firmware