Wireless Joint

Hi all,

I desperately need some help. I recently put together a WE826-T2 router with a Sierra 7565 modem and using the sim card from my tablet that is on my Verizon plan. I have 15GB of tethered data per device. I followed the tutorial and got it up and running without a problem and set the TTL setting to 65. I checked stats and its showing up as tethered data. I followed the suggestions and switched it to 64 but no luck. I googled it last night and saw someone recommend to try 117. Did that but still no difference and I maxed out my tethering data for the month already and it just reset yesterday. Am I missing something or is there another value to try? I don't have access to any other form of data where I live. The cable company just extended their service in my area but they stopped a half down the road with no indication they are going to run the rest of the way.

Thanks in advance

The issue could well be IPV6 related. I would disable the Firewall > Custom TTL Setting > Save and Apply.

Then, go to Firewall > Custom Rules and copy and paste the following, and Restart Firewall:
Thereafter, do a power off/power on reboot.

Once connected to the network, keep a close watch on your hotspot data.

If it is still bleeding through, then try changing the 65 to 117, and again reboot.

Thank you I'll give it a try

Should I re-enable Firewall/Custom TTL Settings

scott.mccoy wrote: ↑Wed Mar 04, 2020 6:36 pm Should I re-enable Firewall/Custom TTL Settings

No. Leave it disabled.

scott.mccoy wrote: ↑Sun Mar 01, 2020 7:19 pm Thank you I'll give it a try

Any luck? Did it work for you?

Did the IPV6 fix work for you?

Any update on this? Was on Verizon prepaid for a long time and was never able to get around their streaming speed cap. Just switched to a post paid unlimited plan, and wondering if I should add a tablet line so I can use the SIM in my WE826.