Greetings,
I'm currently trying to set up and configure a new connection using a MC7455 modem. I've run the following commands to get it configured:
at!entercnd="A710"
at!usbcomp=1,1,1009
At!reset
Then manually reboot the router.
Log back into it and run these commands:
at!entercnd="A710"
at!band=0d,"Sprint (All)",0,10003000000
at!band=0a,"B41",0,10000000000
at!band=0b,"B25",0,00001000000
at!band=0c,"B26",0,00002000000
at!band=0a
At!reset
When I perform a at!gstatus? command, it says I"m connected to Channel 13, and has a verizon configuration on it. I've tried to flash it back to basic generic firmware, but it continues to display the incorrect information.
Any thoughts or suggestions to remediate this bizarre situation?
Regards
Incorrect configuration on new modem
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
Didneywhorl
- Posts: 3615
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1363 times
- Been thanked: 756 times
- Contact:
-
JimHelms
- Site Admin
- Posts: 1361
- Joined: Tue Dec 19, 2017 8:59 pm
- Location: DFW Texas
- Has thanked: 79 times
- Been thanked: 192 times
- Contact:
Re: Incorrect configuration on new modem
You might refer to THIS topic.frizzanz wrote: ↑Thu Jan 16, 2020 11:22 am When I perform a at!gstatus? command, it says I"m connected to Channel 13, and has a verizon configuration on it. I've tried to flash it back to basic generic firmware, but it continues to display the incorrect information.
Any thoughts or suggestions to remediate this bizarre situation?
Regards
