Using the Breed Web Recovery Console

How To Tutorials related to Routers and Firmware
Forum rules
This forum is for tutorials only--not for help or assistance.
Post Reply
User avatar
JimHelms
Site Admin
Posts: 1361
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 192 times
Contact:

Using the Breed Web Recovery Console

Post by JimHelms »

This tutorial will focus on accessing (and interpreting) the Breed Web Recovery Console.

It is sometimes necessary, and often preferred, to use the Breed Web Recovery Console when going from one firmware build to the next.

This process will help to assure all files and configurations from the previous build are overwritten--as opposed to updated.

Overwriting the previous firmware image will help to avoid build to build incompatibilities.

To access the Console:
  • Unplug the power cable from the router
  • Press and hold the reset button while reinserting the power cable (for a few seconds)
  • Open a fresh web browser and type in the IP address of 192.168.1.1

The default console page should now appear and written in Chinese.


Console default page.png


Using a translator extension in Google Chrome is handy to translate the pages--though you can just use the ones below.


Console default page translated.png


  • Select the Firmware Update tab on the left and check the box next to firmware.
  • Select the Flash Layout for the Public version (0x500000)
  • Choose File to access the new firmware to upload into the router
  • Check the Auto restart box
  • Click the Upload button

Console Firmware Upload.png


The next window to appear will be the confirmation screen. Select the Update button.


Console confirmation.png

The update process usually takes between 3 and 5 minutes so give it a little time.

Once you're able to login the router UI, the process is completed.

It is usually a good idea to power off/power on a router after uploading a new firmware image.
You do not have the required permissions to view the files attached to this post.
Groessleriv
Posts: 14
Joined: Mon Jul 12, 2021 2:26 pm
Has thanked: 0
Been thanked: 2 times

Re: Using the Breed Web Recovery Console

Post by Groessleriv »

Mine won’t make it past 49%
carp4
Posts: 5
Joined: Sun May 15, 2022 9:38 am
Has thanked: 0
Been thanked: 0

Re: Using the Breed Web Recovery Console

Post by carp4 »

Try a different browser. Try incognito mode.
Post Reply

Return to “Tutorials”