Those of you that have to use the Recovery Mode on a WE | WG router will have the pleasure of looking at a Chinese language screen. While it isn't hard to figure out what should happen, it is nice to know exactly what is being said here.
I've translated the recovery page so you can see what is what.
Chinese screen
English screen
WE | WG Recovery Mode Chinese Language
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
-
serverside
- Posts: 88
- Joined: Wed Jul 11, 2018 3:02 pm
- Has thanked: 2 times
- Been thanked: 7 times
Re: WE | WG Recovery Mode Chinese Language
I need to take photos of mine as they have a new screen on the WG3526.
-
BillA
- Posts: 1156
- Joined: Sun Dec 01, 2019 6:46 pm
- Location: USA
- Has thanked: 209 times
- Been thanked: 319 times
- Contact:
Re: WE | WG Recovery Mode Chinese Language
I've noticed that the latest version WG3526 bootloader, no longer requires the IP to be set to a specific value on the pc.
Unplug the power cable, hold down the reset button, inset the power cable, count to 5 seconds, release the reset button then go to > http://192.168.1.1/index.html < This is important, not just 192.168.1.1!
Click the large button in the middle of the screen, select the file, and wait till the flashing has finished.
Here's a detailed guide of the above.
viewtopic.php?p=6007#p6007
