Wireless Joint

Posted: **Tue Mar 14, 2023 2:26 pm**

Please assist in identifying the RM520N-GL Antenna ports for connecting to antenna (external).
I plan to get 2x (2x2 Mimo) and like to know whats the correct way to connect the 2x2Mimos to the RM520N-GL module.

I like to confirm if i have a single 2x2 Mimo i should connect to the primary MIMO ports and there is no polarity .
Thanks in advance

Posted: **Tue Mar 14, 2023 4:31 pm**

From wireless haven store.

Screenshot_20230314-173042.png

Posted: **Fri Mar 31, 2023 7:54 am**

if connecting only a 2x2 Mimo - I should use the Primary MIMO pair (ANT1 + ANT2)??

Posted: **Fri Mar 31, 2023 9:39 am**

The image is mislabeled primary-secondary.

I would connect 2x2 mimo to ANT0 and ANT3. Those two cover all bands. ANT1 and ANT2 do not.

Posted: **Fri Mar 31, 2023 10:37 am**

Didneywhorl wrote: ↑Fri Mar 31, 2023 9:39 am The image is mislabeled primary-secondary.

I would connect 2x2 mimo to ANT0 and ANT3. Those two cover all bands. ANT1 and ANT2 do not.

Wow Thanks for the correction...will do that thank you

Wireless Joint

RM520N-GL use with mimo 2x2 (2x)

RM520N-GL use with mimo 2x2 (2x)

Re: RM520N-GL use with mimo 2x2 (2x)

Re: RM520N-GL use with mimo 2x2 (2x)

Re: RM520N-GL use with mimo 2x2 (2x)

Re: RM520N-GL use with mimo 2x2 (2x)