Page 1 of 1

Help recovering MR1100 boot loop issue

Posted: Fri Jan 20, 2023 2:41 pm
by mosasha
Hi all and good day,

I have a mr1100 eus version that had a problem which is the device freezes when adding apn so i tried to update the firmware with fdt and the device never booted again i tried every firmware available and nothing fixed the boot loop
so kindly do any one here have a way to fix the issue it will be much appreciated

thanks in advance and best regards

Re: Help recovering MR1100 boot loop issue

Posted: Mon Jan 23, 2023 6:12 am
by Rich Hathaway
In this case it needs to be re-loaded from emergency (9008) mode, this will recover it.

Re: Help recovering MR1100 boot loop issue

Posted: Mon Jan 23, 2023 7:04 am
by mosasha
Rich Hathaway wrote: Mon Jan 23, 2023 6:12 am In this case it needs to be re-loaded from emergency (9008) mode, this will recover it.
thanks for the replay,

sorry to trouble you out but can you please provide more info on how to get the device to this mode and what firmware to use


thanks in advance

Re: Help recovering MR1100 boot loop issue

Posted: Mon Jan 23, 2023 7:21 am
by Rich Hathaway
Hold power while you are plugging it in and keep holding power until your pc dings, about 5 seconds, you will need a patched loader and firmware other than a .spk
Send the loader then erase your device back to 0 then it can be loaded with this type of image (byte by byte) when finished your device will be working again.

Re: Help recovering MR1100 boot loop issue

Posted: Mon Jan 23, 2023 7:34 am
by mosasha
Rich Hathaway wrote: Mon Jan 23, 2023 7:21 am Hold power while you are plugging it in and keep holding power until your pc dings, about 5 seconds, you will need a patched loader and firmware other than a .spk
Send the loader then erase your device back to 0 then it can be loaded with this type of image (byte by byte) when finished your device will be working again.
thanks for the explanation

but this image you mentioned above how to get it..is it available to download?

Re: Help recovering MR1100 boot loop issue

Posted: Mon Jan 23, 2023 10:05 am
by Rich Hathaway
I am not aware of any downloads for it, you never know though, there are prob only a few people that have been able to make firmware like this, netgear never released any or had any leaked that I am aware of and the people that are able to make it dont post it for public, they tend to like to sell services to repair/recover devices for people.
If you search for it it will be a large file, mine ended up being more than a half a gig each as you can see below.
M1_My_Firm.PNG

Re: Help recovering MR1100 boot loop issue

Posted: Mon Jan 23, 2023 10:37 am
by mosasha
Rich Hathaway wrote: Mon Jan 23, 2023 10:05 am I am not aware of any downloads for it, you never know though, there are prob only a few people that have been able to make firmware like this, netgear never released any or had any leaked that I am aware of and the people that are able to make it dont post it for public, they tend to like to sell services to repair/recover devies for people.
If you search for it it will be a large file, mine ended up being more than a half a gig each as you can see below.

M1_My_Firm.PNG
thanks Rich
if its possible for you can you in any way share the firmware to recover the device or if you offer repair services

it will be highly appreciated

Thanks again

Re: Help recovering MR1100 boot loop issue

Posted: Mon Jan 23, 2023 11:05 am
by Rich Hathaway
Threads are not the place to solicit services, the powers that be do like that.
Use the marketplace section of the forum
viewtopic.php?t=2696

Re: Help recovering MR1100 boot loop issue

Posted: Tue Jan 24, 2023 10:23 am
by Klaus4
Hi!! I am not able to run the FDT cause it says no sdk file. Does anyone have one? for me or how can i Create one?

thanks

Klaus

PS I have an ATT device and live in Austria. I have an identical EU router so is there any solution to get the FW out of my EU router and puti in the ATT?

Re: Help recovering MR1100 boot loop issue

Posted: Tue Jan 24, 2023 4:19 pm
by Rich Hathaway
I think you mean spk, if you do they are on the web if you look they are not hard to find.
to answer your other question there are no AT&T spk's released or leaked, the only way to get AT&T on your device is to pull the AT&T firmware from a working device and make it reloadable then you would need a proper loader to load it to your device.

Re: Help recovering MR1100 boot loop issue

Posted: Sat Jan 28, 2023 12:53 pm
by Klaus4
I will try to put in the EU version in a boot loop ATT. How can I make a backup from my EU version. for flashin in the ATT

Re: Help recovering MR1100 boot loop issue

Posted: Sat Jan 28, 2023 3:14 pm
by Rich Hathaway
FDT is an executable that is called up by the command line, I am not sure what sdk you are trying to use but all you need to use it is a command prompt. you can call it up and see its usage by
fdt -h
To make a backup you cannot use fdt to make it or to load it to another device, you would need a working loader (ENPRG/NPRG)

Re: Help recovering MR1100 boot loop issue

Posted: Sat Jan 28, 2023 3:26 pm
by Klaus4
do you have link for the Fdt?

Thanks

Re: Help recovering MR1100 boot loop issue

Posted: Sat Jan 28, 2023 4:47 pm
by Rich Hathaway
It is all over the web, google for it.

Re: Help recovering MR1100 boot loop issue

Posted: Sat Jan 28, 2023 4:52 pm
by Klaus4
I fixed it. It still have ATT Firmware in it but I hope that it will work in the EU

Thanks

Re: Help recovering MR1100 boot loop issue

Posted: Sun Jan 29, 2023 2:18 am
by jericsmith
Klaus4 wrote: Sat Jan 28, 2023 4:52 pm I fixed it. It still have ATT Firmware in it but I hope that it will work in the EU

Thanks
Could you share what you did to fix it? Thanks!

Re: Help recovering MR1100 boot loop issue

Posted: Sun Jan 29, 2023 2:33 am
by Klaus4
jericsmith wrote: Sun Jan 29, 2023 2:18 am
Could you share what you did to fix it? Thanks!
viewtopic.php?p=26543#p26543https://wir ... 543#p26543