Manual operator selection

Post Reply
gioele
Posts: 7
Joined: Thu Apr 14, 2022 11:12 am
Has thanked: 0
Been thanked: 0

Manual operator selection

Post by gioele »

Hello,

I have the cudy lt18 and I’m loving it! I’m manually selecting my operator by running the command:

AT+COPS=1,0,"MY SELECTED OPERATOR",7

by accessing the web interface of the router at /cgi-bin/luci/admin/network/gcom/atcmd

The selection works well and it also persists after a reboot, but eventually, after a few days, my manual selection is lost and when I run the command AT+COPS? I see that it’s back to automatic:

+COPS:0,0,"SOME OTHER OPERATOR",7

The first number (mode) changes from 1 (manual) to 0 (automatic).

Is there a way to make the manual selection “stick”? Is there a way to ssh to the device to run custom scripts or some other way to run the operator selection periodically?

Thank you!
gioele
Posts: 7
Joined: Thu Apr 14, 2022 11:12 am
Has thanked: 0
Been thanked: 0

Re: Manual operator selection

Post by gioele »

I contacted Cudy Support and they mentionned that they will release a new firmware update with the option to manually select the APN! That's great news!
Post Reply

Return to “Cudy”