DW5821e - Using QMI Mode [Solved]

Misc Mini PCI-E and M.2 Modem Card and USB Dongle Topics
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
eskaryo
Posts: 61
Joined: Tue Aug 30, 2022 1:59 am
Has thanked: 5 times
Been thanked: 5 times

DW5821e - Using QMI Mode [Solved]

Post by eskaryo »

I'm running GoldenOrb_2022-06-24 ( OpenWrt 21.02-SNAPSHOT ) on a WG1608 with a DW5821e modem.

I'm reading that there are potential latency improvements when using QMI mode instead of MBIM and I'm really struggling to get QMI going.
It seems like ModemManager may be a surefire way to get this running in QMI mode, but it is not supported in ROOter due to kmod packages being required.

The DW5821e won't change the mode given the AT command AT^SETMODE=2, it always remains 0

usbmode configuration was attempted as well, but always always MBIM mode.

Code: Select all

 "413c:81d7": {
             "*": {
                  "msg": [  ],
                  "config": 1
             }
},

What can I do to get this to use QMI? Do I need to abandon ROOter?

Code: Select all

T:  Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev= 3.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=
E:  Ad=82(I) Atr=03(Int.) MxPS=   1 Ivl=4096ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
C:* #Ifs= 4 Cfg#= 2 Atr=a0 MxPwr=896mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
eskaryo
Posts: 61
Joined: Tue Aug 30, 2022 1:59 am
Has thanked: 5 times
Been thanked: 5 times

Re: DW5821e - QMI Mode

Post by eskaryo »

Thanks to the crazy folks at 4pda.to

Create file:

Code: Select all

/etc/hotplug.d/usb/00-T77W968
Paste content:

Code: Select all

T77W968_PRODUCT="413c/81d7/318"

if [ "${PRODUCT}" = "${T77W968_PRODUCT}" ]; then
    if [ "${ACTION}" = "add" ]; then
        device_id="$(echo ${DEVICENAME} | awk -F':' '{print $1}')"
        device_path="/sys/bus/usb/devices/${device_id}/bConfigurationValue"
        config="$(cat ${device_path})"

        logger -t hotplug "T77W968: id: ${device_id}, path: ${device_path}, config mode:${config}"

        if [ "${config}" = "2" ]; then
          logger -t hotplug "T77W968: modem not in qmi, switching to qmi"

          echo -1 > ${device_path}
          echo 1 > ${device_path}
        fi
    fi
fi
Then either reset the usb port or bounce your router.
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: DW5821e - Using QMI Mode [Solved]

Post by Didneywhorl »

wow! Thanks for posting. That is good info!
matrx10503
Posts: 24
Joined: Wed Feb 17, 2021 11:46 am
Has thanked: 0
Been thanked: 4 times

Re: DW5821e - Using QMI Mode [Solved]

Post by matrx10503 »

Edit: I figured out how to add this script in rooter. It doesn't seem like my dw5821e likes qmi mode, couldn't keep a steady connection, kept rebooting.
eskaryo
Posts: 61
Joined: Tue Aug 30, 2022 1:59 am
Has thanked: 5 times
Been thanked: 5 times

Re: DW5821e - Using QMI Mode [Solved]

Post by eskaryo »

matrx10503 wrote: Tue Dec 13, 2022 3:11 pm Edit: I figured out how to add this script in rooter. It doesn't seem like my dw5821e likes qmi mode, couldn't keep a steady connection, kept rebooting.
Hey matrx sorry it's taken me a while to get back to you.

This changes the protocol the router uses to communicate with the modem. I see slightly (5-10ms) better pings when playing games and don't experience the negative effects you have reported. I have swapped between QMI and MBIM and tested rates/latencies on a few occasions and at this point can only claim that very small improvement. Worth it, though, for FPS gaming I think.
Post Reply

Return to “Misc Modem Cards and Dongles”