Page 1 of 1
Modem Manager Install
Posted: Mon Aug 22, 2022 4:56 pm
by zac2424
Hey,
Anyone have a write up on how to install Modem Manager? I purchased a GLi.Net AXT-1800 router and need to get MM installed to get my USB enclosure recognized. I found the thread on the 826 but that was from a defined firmware install. How do you install it onto the router manually? Thanks in advance!
Re: Modem Manager Install
Posted: Tue Aug 23, 2022 12:00 pm
by Didneywhorl
Depends on the firmware, but the CLI way is using the commands:
opkg update
then
opkg install modemmanager
requires some form of internet conneciton (WAN is easiest)
Re: Modem Manager Install
Posted: Tue Aug 23, 2022 1:45 pm
by zac2424
Thanks! I was able to ssh into router, and run those 2 commands successfully, but i don't have 'modemmanager' as an option on wwan. Is there anything else i need to do?
Screen Shot 2022-08-23 at 1.44.07 PM.png
Re: Modem Manager Install
Posted: Tue Aug 23, 2022 2:09 pm
by Didneywhorl
You may want to look up modemmanager and its related packages that are needed and make sure they were all installed. Make sure to power cycle the router after its all installed.
Also, I'm not entirely sure you can assign the modemmanager protocol if it doesn't detect a device. Not 100% sure. ModemManager isn't my specialty just yet.
Re: Modem Manager Install
Posted: Tue Aug 23, 2022 2:10 pm
by Didneywhorl