Quectel Rm510Q-AE Programming Bands

Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
punkguy00017
Posts: 173
Joined: Thu May 14, 2020 1:45 pm
Has thanked: 2 times
Been thanked: 26 times

Quectel Rm510Q-AE Programming Bands

Post by punkguy00017 »

Just got one of these 5g modems. I had a quectel Em20-g. What I notuce is in the AT co..and it won't accept AT+QCFG="band",0,802 for example. From the quectel command spread sheet. It works on the em20. Also when I try to run a check for available band it says scan for neighboring cells not supported. Is there an at command to activate the at commands?
User avatar
token
Posts: 22
Joined: Fri Apr 15, 2022 10:30 pm
Location: 127.0.0.1
Has thanked: 1 time
Been thanked: 6 times

Re: Quectel Rm510Q-AE Programming Bands

Post by token »

For the RM series, you have to specify LTE bands specifically.

AT+QNWPREFCFG="lte_band",1:2:5:41:69:420

For 5g SA, it's
AT+QNWPREFCFG="nr5g_band",1:2:5:41:69:420

You separate the specific band numbers with colons, only the command and band number list are separated by a comma.
punkguy00017
Posts: 173
Joined: Thu May 14, 2020 1:45 pm
Has thanked: 2 times
Been thanked: 26 times

Re: Quectel Rm510Q-AE Programming Bands

Post by punkguy00017 »

Thank u sir
Post Reply

Return to “Quectel Modems”