Wireless Joint

I have a WG3526-P (NexP1Go after the firmware update) and it has a EM7565 modem with an AT&T sim in it. I also have a Samsung A12 plugged in usb and connected via usb tethering. The router sees both but I cannot for the life of me figure our how to make the router use the Samsung tethered as the primary WAN. It keeps using the EM7565 modem card. What am I missing?

That would be in the MWAN3 settings. You may need to install the latest firmware and make sure you use the "full" version in the .zip file. then lookup openWRT MWAN3 configuration on youtube

Didneywhorl wrote: ↑Tue May 31, 2022 11:15 am That would be in the MWAN3 settings. You may need to install the latest firmware and make sure you use the "full" version in the .zip file. then lookup openWRT MWAN3 configuration on youtube

What is the latest firmware available for the WG3526-P? I've always had to hunt it down as the product page has nothing on it for firmware.

https://thewirelesshaven.com/wifix-router-firmware/

https://thewirelesshaven.com/router-firmware


Thar be links on the product pages and main menu.

Also good ole Rooter: http://aturnofthenut.com/autobuilds/

Didneywhorl wrote: ↑Tue May 31, 2022 3:37 pm https://thewirelesshaven.com/wifix-router-firmware/

https://thewirelesshaven.com/router-firmware


Thar be links on the product pages and main menu.

Thank you, looks like I'm on one version older (GoldenOrb_2021-09-11). I'll update and see if it has the MWAN3 option as I am missing it right now.