WG1608 Issues with blink cameras

Topics related to ZBT Routers
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
stryker6040
Posts: 5
Joined: Wed Mar 16, 2022 1:21 pm
Has thanked: 0
Been thanked: 0

WG1608 Issues with blink cameras

Post by stryker6040 »

Hello I am using a WG1608 running GO with the wireless of the 1608 turned off. I am using google wifi mesh system that I previous used with an M1 and my blink cameras will not do live playback and activity notifications are very delayed as well.

Provider is TMHI and previous setup was and M1 using magic wired to a switch which went out to the first mesh pod. Had no issue with this setup other than the M1 did not support the 5G is my area.

WG1608 is running a RM510Q-GL modem and over all works good, but is not playing nice with the google mesh system and other wireless device

I would basically like to use the 1608 as a modem only if possible and use a different inside the house to distribute DCHP if possible.

Anyone walk me through this?
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: WG1608 Issues with blink cameras

Post by Didneywhorl »

Try turning off all ipv6, it may be an issue.
stryker6040
Posts: 5
Joined: Wed Mar 16, 2022 1:21 pm
Has thanked: 0
Been thanked: 0

Re: WG1608 Issues with blink cameras

Post by stryker6040 »

Didneywhorl wrote: Wed Mar 16, 2022 6:00 pm Try turning off all ipv6, it may be an issue.
How would I go about doing that?
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: WG1608 Issues with blink cameras

Post by Didneywhorl »

Simplest first thing is to use an IP (IPV4) only APN.

DBL check the APNs using AT+CGDCONT?
stryker6040
Posts: 5
Joined: Wed Mar 16, 2022 1:21 pm
Has thanked: 0
Been thanked: 0

Re: WG1608 Issues with blink cameras

Post by stryker6040 »

fbb.home reports at ipv4v6
Post Reply

Return to “ZBT Routers”