NEXQ6GO / EM12 Not Connecting

Topics related to WiFiX branded routers
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
BMSman
Posts: 16
Joined: Tue Jul 20, 2021 10:16 pm
Has thanked: 1 time
Been thanked: 1 time

NEXQ6GO / EM12 Not Connecting

Post by BMSman »

Been playing with this for a couple days. I'm trying to get two NEXQ6GO / EM12 units to connect to Visible. I have a WG3526/EM160 that runs the SIM and same settings, including VSBLINTERNET APN without an issue.

In MBIM I get this:

Code: Select all

Sat Jan 22 13:29:54 2022 user.notice MBIM Connect: Query radio state
Sat Jan 22 13:29:55 2022 user.notice MBIM Connect: Reading capabilities
Sat Jan 22 13:29:55 2022 user.notice MBIM Connect: Checking subscriber
Sat Jan 22 13:29:55 2022 user.notice MBIM Connect: Checking PIN state
Sat Jan 22 13:29:55 2022 daemon.notice netifd: wan1 (8624): required pin: 3 - pin2
Sat Jan 22 13:29:55 2022 daemon.notice netifd: wan1 (8624): remaining attempts: 3
Sat Jan 22 13:29:55 2022 user.notice MBIM Connect: PIN is not required
Sat Jan 22 13:29:55 2022 user.notice MBIM Connect: Register with network
Sat Jan 22 13:29:55 2022 user.notice MBIM Connect: Subscriber registration failed
Sat Jan 22 13:29:55 2022 user.notice MBIM Connect: MBIM bringup failed, retry in 15s
Sat Jan 22 13:30:10 2022 user.notice MBIM Connect: Stopping network
Sat Jan 22 13:30:11 2022 daemon.notice netifd: wan1 (8811): Command failed: Permission denied
Sat Jan 22 13:30:11 2022 daemon.notice netifd: Interface 'wan1' is now down
Sat Jan 22 13:30:11 2022 daemon.notice netifd: Interface 'wan1' is setting up now
Sat Jan 22 13:30:11 2022 user.notice URL-DEBUG: hotplug (iface): action='ifup-failed' interface='wan1'
In QMI I get this:

Code: Select all

Sat Jan 22 14:03:28 2022 user.notice Create Connection: Retry Connection
Sat Jan 22 14:03:39 2022 user.notice Create Connection: Pincode in script
Sat Jan 22 14:03:39 2022 user.notice Create Connection: Attempting to Connect Modem 1
Sat Jan 22 14:03:52 2022 user.notice QMI Connect: WDA-GET-DATA-FORMAT is "raw-ip"
Sat Jan 22 14:03:53 2022 user.notice QMI Connect: Setting FCC Auth: "WMS invalid message ID"
Sat Jan 22 14:03:54 2022 user.notice QMI Connect: Waiting for network registration
Sat Jan 22 14:03:54 2022 user.notice QMI Connect: Starting network VSBLINTERNET
Sat Jan 22 14:03:54 2022 user.notice QMI Connect: Connection returned : "Call failed"
Sat Jan 22 14:03:54 2022 user.notice QMI Connect: Status is "disconnected"
I've kinda reached the end of my knowledge and haven't found anything on hear from anyone else. Any help would be much appreciated.
BMSman
Posts: 16
Joined: Tue Jul 20, 2021 10:16 pm
Has thanked: 1 time
Been thanked: 1 time

Re: NEXQ6GO / EM12 Not Connecting

Post by BMSman »

Update: Its doing the same thing on my main phone SIM (VZ). Is this the modem?
gscheb
Posts: 1595
Joined: Tue Sep 10, 2019 10:37 am
Has thanked: 85 times
Been thanked: 329 times

Re: NEXQ6GO / EM12 Not Connecting

Post by gscheb »

BMSman
Posts: 16
Joined: Tue Jul 20, 2021 10:16 pm
Has thanked: 1 time
Been thanked: 1 time

Re: NEXQ6GO / EM12 Not Connecting

Post by BMSman »

Thanks for the quick reply.

Went through all that and still has the same issues in the system log.

What I restarted it is did change the APN's:

Code: Select all

+CGDCONT: 1,"IPV4V6","VSBLINTERNET","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
+CGDCONT: 2,"IPV4V6","vsblinternet","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
+CGDCONT: 3,"IPV4V6","vsblinternet","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
+CGDCONT: 4,"IPV4V6","vsblinternet","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
+CGDCONT: 5,"IPV4V6","vsblinternet","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
+CGDCONT: 6,"IPV4V6","vsblinternet","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
Would this in the System Log have anything to do with it?

Code: Select all

Sun Jan 23 16:24:52 2022 user.notice MBIM Connect: MBIM bringup failed, retry in 15s
Sun Jan 23 16:25:05 2022 daemon.err uhttpd[1568]: lua: /usr/lib/rooter/log/rotate.lua:32: attempt to compare number with nil
Sun Jan 23 16:25:05 2022 daemon.err uhttpd[1568]: stack traceback:
Sun Jan 23 16:25:05 2022 daemon.err uhttpd[1568]: 	/usr/lib/rooter/log/rotate.lua:32: in main chunk
Sun Jan 23 16:25:05 2022 daemon.err uhttpd[1568]: 	[C]: ?
Sun Jan 23 16:25:05 2022 daemon.err uhttpd[1568]: mv: can't rename '/tmp/attlog': No such file or directory
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: NEXQ6GO / EM12 Not Connecting

Post by Didneywhorl »

Hey there,

Re-flash the router again with out saving any settings, via firmware recover, 3x in a row.

Fresh start.



Don't set any settings on the router except:

System->System-> Time zone and System Time sync with browser. Save and apply settings.

System->Admin-> Password. Save and apply.

Modem->Connection profile->APN. set to IPV4/IPV6 connection type. no user no password, NONE for encryption type. Save and apply.

That's it.

The rest is 100% modem based until you get connected. TTL and HL settings will be needed, but get connected first. Don't touch any other router settings... for now.


Once that is done.

We hit the modem.

Cleat out all APNs.

Code: Select all

AT+CGDCONT=1
AT+CGDCONT=2
AT+CGDCONT=3
AT+CGDCONT=4
AT+CGDCONT=5
AT+CGDCONT=6
AT+CGDCONT=etc
Then set only 1 and 3

Code: Select all

AT+CGDCONT=1,"IPV4V6","vsblinternet"
AT+CGDCONT=3,"IPV4V6","vsblinternet"

All Visible SIMs should be activated in a cell phone and tested for connection in the phone before use in any other device.

I recommend setting your modems identity to something that resembles the identity of the Visible phone registered to the SIM card. Can't talk about that process here, but it's not hard to find. It's the same process for all Quectel modems. One command.

Send the modem these commands, even if you did already:

If this one fails, it's no big deal, move past it:

Code: Select all

AT+QMBNCFG="deactivate"
This one should not fail/error:

Code: Select all

AT+QMBNCFG="autosel",0
then..
also cannot fail this command

Code: Select all

AT+QCFG="usbnet",2
then

Code: Select all

AT+CFUN=1,1
Then wait for the modem to reboot on it's own... and then we wait for connection.
BMSman
Posts: 16
Joined: Tue Jul 20, 2021 10:16 pm
Has thanked: 1 time
Been thanked: 1 time

Re: NEXQ6GO / EM12 Not Connecting

Post by BMSman »

Thanks for your help on this.

I've followed your exact instructions using my VZ sim card. This is one that works well on a phone and I assume its easier than Visible. I ONLY touched router setting you called out and NOT the Modem settings yet as I believe you said to wait until its connected for that.

I did check that the APN in the modem was correct.

Code: Select all

+CGDCONT: 1,"IPV4V6","VZWINTERNET","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
+CGDCONT: 2,"IPV4V6","vzwadmin","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
+CGDCONT: 3,"IPV4V6","vzwinternet","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
+CGDCONT: 4,"IPV4V6","vzwapp","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
+CGDCONT: 5,"IPV4V6","vzwemergency","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,1
+CGDCONT: 6,"IPV4V6","vzwclass6","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
Here is what the system log is saying.

Code: Select all

Mon Jan 24 20:58:51 2022 daemon.notice netifd: Interface 'wan1' is setting up now
Mon Jan 24 20:58:51 2022 user.notice URL-DEBUG: hotplug (iface): action='ifup-failed' interface='wan1'
Mon Jan 24 20:58:52 2022 user.notice MBIM Connect: Query radio state
Mon Jan 24 20:58:52 2022 user.notice MBIM Connect: Reading capabilities
Mon Jan 24 20:58:52 2022 user.notice MBIM Connect: Checking subscriber
Mon Jan 24 20:58:53 2022 user.notice MBIM Connect: Checking PIN state
Mon Jan 24 20:58:53 2022 daemon.notice netifd: wan1 (14534): required pin: 3 - pin2
Mon Jan 24 20:58:53 2022 daemon.notice netifd: wan1 (14534): remaining attempts: 3
Mon Jan 24 20:58:53 2022 user.notice MBIM Connect: PIN is not required
Mon Jan 24 20:58:53 2022 user.notice MBIM Connect: Register with network
Mon Jan 24 20:58:53 2022 user.notice MBIM Connect: Subscriber registration failed
Mon Jan 24 20:58:53 2022 user.notice MBIM Connect: MBIM bringup failed, retry in 15s
Mon Jan 24 20:59:08 2022 user.notice MBIM Connect: Stopping network
Mon Jan 24 20:59:08 2022 daemon.notice netifd: wan1 (14801): Command failed: Permission denied
Mon Jan 24 20:59:08 2022 daemon.notice netifd: Interface 'wan1' is now down
Still not connecting.
BMSman
Posts: 16
Joined: Tue Jul 20, 2021 10:16 pm
Has thanked: 1 time
Been thanked: 1 time

Re: NEXQ6GO / EM12 Not Connecting

Post by BMSman »

Ok, So I went ahead and finished the instructions:

Code: Select all

+CGDCONT: 1,"IPV4V6","VZWINTERNET","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
+CGDCONT: 3,"IPV4V6","vzwinternet","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
and still getting the same

Code: Select all

Mon Jan 24 21:19:09 2022 user.notice MBIM Connect: Stopping network
Mon Jan 24 21:19:10 2022 daemon.notice netifd: wan1 (9735): Command failed: Permission denied
Mon Jan 24 21:19:10 2022 daemon.notice netifd: Interface 'wan1' is now down
Mon Jan 24 21:19:10 2022 daemon.notice netifd: Interface 'wan1' is setting up now
Mon Jan 24 21:19:10 2022 user.notice URL-DEBUG: hotplug (iface): action='ifup-failed' interface='wan1'
Mon Jan 24 21:19:10 2022 user.notice MBIM Connect: Query radio state
Mon Jan 24 21:19:11 2022 user.notice MBIM Connect: Reading capabilities
Mon Jan 24 21:19:11 2022 user.notice MBIM Connect: Checking subscriber
Mon Jan 24 21:19:11 2022 user.notice MBIM Connect: Checking PIN state
Mon Jan 24 21:19:11 2022 daemon.notice netifd: wan1 (9752): required pin: 3 - pin2
Mon Jan 24 21:19:11 2022 daemon.notice netifd: wan1 (9752): remaining attempts: 3
Mon Jan 24 21:19:11 2022 user.notice MBIM Connect: PIN is not required
Mon Jan 24 21:19:11 2022 user.notice MBIM Connect: Register with network
Mon Jan 24 21:19:11 2022 user.notice MBIM Connect: Subscriber registration failed
Mon Jan 24 21:19:11 2022 user.notice MBIM Connect: MBIM bringup failed, retry in 15s
I'm happy to have you jump on a computer remotely to look over it but something is not right. Could it be something with the connection? like antennas? I doubt it as I live in the middle of a major metropolitan area. Thanks again!
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: NEXQ6GO / EM12 Not Connecting

Post by Didneywhorl »

Show us the output from:

Code: Select all

AT+CGDCONT?

Code: Select all

AT+QMBNCFG="List"

Code: Select all

AT+QGMR
Also, have you modified the modem identity? You may be getting denied based on device not matching the registered device.
BMSman
Posts: 16
Joined: Tue Jul 20, 2021 10:16 pm
Has thanked: 1 time
Been thanked: 1 time

Re: NEXQ6GO / EM12 Not Connecting

Post by BMSman »

AT+CGDCONT?

Code: Select all

AT+CGDCONT?
+CGDCONT: 1,"IPV4V6","VZWINTERNET","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
+CGDCONT: 3,"IPV4V6","vzwinternet","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
AT+QMBNCFG="List"

Code: Select all

AT+QMBNCFG="List"
+QMBNCFG: "List",0,0,0,"hVoLTE-Verizon",0x0801010E,201908221
+QMBNCFG: "List",1,0,0,"Commercial-EE",0x0801220B,202102191
+QMBNCFG: "List",2,0,0,"Rogers_Canada",0x08014800,202103111
+QMBNCFG: "List",3,0,0,"Commercial-TMO",0x0801050F,202005261
+QMBNCFG: "List",4,0,0,"Commercial-Sprint",0x08010206,202009121
+QMBNCFG: "List",5,0,0,"ChungHwa_Taiwan_Commercial",0x0801FD01,201906281
+QMBNCFG: "List",6,0,0,"TaiwanMobile_Commercial",0x08014100,201906281
+QMBNCFG: "List",7,0,0,"FarEastOne_Taiwan_Commercial",0x08014000,201910221
+QMBNCFG: "List",8,0,0,"FirstNet",0x08015300,201904081
+QMBNCFG: "List",9,0,0,"ROW_Generic_3GPP_PTCRB_GCF",0x0801FE02,201910231
+QMBNCFG: "List",10,0,0,"Commercial-Reliance",0x08011B0C,201903181
+QMBNCFG: "List",11,0,0,"Telus_Canada",0x08014900,201905101
+QMBNCFG: "List",12,0,0,"TEF_Germany_Commercial",0x08010CC0,201910291
+QMBNCFG: "List",13,0,0,"France-Commercial-Orange",0x08010B21,201906281
+QMBNCFG: "List",14,0,0,"Spain-Non_VoLTE-Telefonica",0x08010C20,201910291
+QMBNCFG: "List",15,0,0,"Commercial-DT-VOLTE",0x08011F1F,202009291
+QMBNCFG: "List",16,0,0,"Germany-VoLTE-Vodafone",0x08010449,201906281
+QMBNCFG: "List",17,0,0,"VoLTE-ATT",0x08010335,202102031
+QMBNCFG: "List",18,0,0,"UK-VoLTE-Vodafone",0x08010426,201908011
+QMBNCFG: "List",19,0,0,"Telstra_Australia_Commercial",0x08010F00,201908191
+QMBNCFG: "List",20,0,0,"Commercial-KDDI",0x08010709,201810221
+QMBNCFG: "List",21,0,0,"Commercial-SBM",0x08011C0B,202008081
+QMBNCFG: "List",22,0,0,"Commercial-DCM",0x08010D0D,202002131
+QMBNCFG: "List",23,0,0,"VoLTE-CU",0x08011561,202008131
+QMBNCFG: "List",24,0,0,"VoLTE_OPNMKT_CT",0x080113E0,201912191
+QMBNCFG: "List",25,0,0,"Volte_OpenMkt-Commercial-CMCC",0x08012010,202002061
+QMBNCFG: "List",26,0,0,"ROW_Commercial",0x0801080A,201904121

OK
AT+QGMR

Code: Select all

AT+QGMR
EM12GPAR01A21M4G_01.004.01.004
No, I did not change the identity as these SIMs have been used a lot in other modems and have always connected. I was trying not to change too much as we go. I can tho if you really think that's it.
BMSman
Posts: 16
Joined: Tue Jul 20, 2021 10:16 pm
Has thanked: 1 time
Been thanked: 1 time

Re: NEXQ6GO / EM12 Not Connecting

Post by BMSman »

I also just tested both of these SIM cards in my MOFI4500 and just changed the APN and both connected fine. I don't think its the service unless its unique to this modem.
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: NEXQ6GO / EM12 Not Connecting

Post by Didneywhorl »

BMSman wrote: Tue Jan 25, 2022 11:56 am I also just tested both of these SIM cards in my MOFI4500 and just changed the APN and both connected fine. I don't think its the service unless its unique to this modem.
It's possible.

When you are testing with Visible, I'm assuming you are changing both CGDCONT=1 and CGDCONT=3 to vsblinternet along with the Connection Profile->APN ?

It wont work on Visible using the vzwinternet APN. Just have to say it in case that was missed. I've done it plenty.

I only use "identity" matched devices on Verizon based plans. I couldn't tell you why it would or wouldn't work without it. I have seen it not work until that one thing was changed.
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: NEXQ6GO / EM12 Not Connecting

Post by Didneywhorl »

BMSman wrote: Tue Jan 25, 2022 11:56 am ... unless its unique to this modem.

Could be that Verizon is blocking all devices with the Quectel TAC# (first part of the IMEI number. I have seen Quectel not work unless you changed the identity, but Sierra and Telit worked fine without changing it.
BMSman
Posts: 16
Joined: Tue Jul 20, 2021 10:16 pm
Has thanked: 1 time
Been thanked: 1 time

Re: NEXQ6GO / EM12 Not Connecting

Post by BMSman »

I went ahead and tested that. It did not improve.

So far I've tested 2 different VZ cards and a Visible card and all have the exact same results in the log. Their has to be something else. Should I load a previous software?
BMSman
Posts: 16
Joined: Tue Jul 20, 2021 10:16 pm
Has thanked: 1 time
Been thanked: 1 time

Re: NEXQ6GO / EM12 Not Connecting

Post by BMSman »

I purchased a couple of cheap WE826 routers from amazon. Fired them up, set the PW, set the clock, set the APN for VZ, and it connected right away. It's using the Quectel EP06. Something is up with these routers or modems and its not looking like a simple setting or command.
Post Reply

Return to “WiFiX Routers”