Page 1 of 1

MOFI4500V3

Posted: Wed Nov 10, 2021 4:14 pm
by Ddunning
I have this giant headache and a lot of buyers remorse hoping a firmware swap will make my experience a bit better. I have the Sierra MC7455 I think so far I must be using the wrong firmware every flash results the same it can’t detect the internal modem. Everything is detected fine in the stock firmware. Can anyone direct me to the proper firmware or a guide to get it working?

Re: MOFI4500V3

Posted: Thu Nov 11, 2021 2:42 pm
by Didneywhorl
What firmware are you using on what device specifically?

Re: MOFI4500V3

Posted: Thu Nov 11, 2021 4:37 pm
by Ddunning
That’s the issue none of the ones I’ve tried recognize the modem I don’t think I’ve been downloading the right one I was hoping someone could point me to a software that works

Re: MOFI4500V3

Posted: Thu Nov 11, 2021 4:38 pm
by Ddunning
:?: Mofi4500-4GXelte v3 it says it’s sim4 if that helps.

Re: MOFI4500V3

Posted: Fri Nov 12, 2021 2:40 pm
by Didneywhorl
I "THINK" the V3 is a WE826Q router. MOFI has said that the V2 and V3 are not the same router base. The only difference in the base router "WE826" that I know of is the WE826T2 and WE826Q. The Early MOFI was based on the T2.

Re: MOFI4500V3

Posted: Sat Nov 13, 2021 12:13 am
by Ddunning
Thanks I’ll give that a try I’ve tried the other variants the b and t both sizes with no luck.

Re: MOFI4500V3

Posted: Sat Nov 13, 2021 12:31 am
by Ddunning
Ok so what i did find out is that this thing is based on the MediaTek's MT7620 chipset with the mc7455 modem installed the q just didnt install and rebooted I think cause its qualcom the firmwares i tried based on mediatek did install. Just never detected the modem or let me send at commands it would throw some kind of usb error.

Re: MOFI4500V3

Posted: Mon Nov 15, 2021 3:30 pm
by Didneywhorl
So you got it working?