CRADLEPOINT CBA850 WITH MC400LP6 MODEM (SIERRA MC7455)

Sierra Wireless AirPrime Modem Card Topics
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
kelteknw
Posts: 9
Joined: Sat Nov 06, 2021 4:16 pm
Has thanked: 3 times
Been thanked: 0

CRADLEPOINT CBA850 WITH MC400LP6 MODEM (SIERRA MC7455)

Post by kelteknw »

Good afternoon all,

Im trying to enter engineering mode on this modem and I cannot for the life of me understand why I keep getting the error message.

I was finally able to use the livedvd to access sierrakeygen myself, however when ever I send the:
AT!OPENLOCK=[response from generator]

I get "error"

step 1.
atterm
ATENTERCND="A710"


step 2.
AT!OPENLOCK?
it spits back the challenge code

step 3.
I enter the challenge code into sierrakeygen
it spits back generated response

step 4.
I send command back to modem:
AT!OPENLOCK=[response from generator]
"error "

error every time, am I missing a step?
CRADLEPOINT 850 WITH LP6.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
Rich Hathaway
Posts: 542
Joined: Mon Mar 08, 2021 2:41 pm
Has thanked: 8 times
Been thanked: 186 times

Re: CRADLEPOINT CBA850 WITH MC400LP6 MODEM (SIERRA MC7455)

Post by Rich Hathaway »

it should be sent like in the image below with quotes
That image/tool is using the OPENMEP so change yours to OPENLOCK if that is what you are doing.
You do not have the required permissions to view the files attached to this post.
Post Reply

Return to “Sierra Wireless Modems”