Page 1 of 1

Issue with NEXQ6GO-U Router and Quactel Modem

Posted: Tue Oct 12, 2021 10:49 am
by gabe1475
Not sure if I should post this here or under the modem section, but having an issue with my router where after booting up, I get a message that there is no modem present.

After emailing with one of the admins at The Wireless Haven, they advised that I should upgrade to latest firmware without keeping the configuration settings. After flashing firmware 3 times per guidance, still getting the same message.

Totally lost on where to go and hoping that an The Wireless Haven admin can chime in on how I should go about troubleshooting.

Re: Issue with NEXQ6GO-U Router and Quactel Modem

Posted: Wed Oct 13, 2021 10:21 am
by Didneywhorl
Does the modem show up on the debug screen (bottom part) or in the system log?

Re: Issue with NEXQ6GO-U Router and Quactel Modem

Posted: Wed Oct 13, 2021 3:28 pm
by gabe1475
Didneywhorl wrote: Wed Oct 13, 2021 10:21 am Does the modem show up on the debug screen (bottom part) or in the system log?
No mention of router under Debug information. The system log has several references to modem, but not really sure what I am looking for.

Re: Issue with NEXQ6GO-U Router and Quactel Modem

Posted: Wed Oct 13, 2021 5:41 pm
by Didneywhorl
Post the logs here if you have them. A text file attachment works, or just quote the text in full. Maybe the Kernel log too.

Re: Issue with NEXQ6GO-U Router and Quactel Modem

Posted: Wed Oct 13, 2021 10:05 pm
by gabe1475
Didneywhorl wrote: Wed Oct 13, 2021 5:41 pm Post the logs here if you have them. A text file attachment works, or just quote the text in full. Maybe the Kernel log too.
Here is the debug information. Sytem Logs and Kernel Logs attached.


T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1

B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0

D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1

P: Vendor=1d6b ProdID=0002 Rev= 4.09

S: Manufacturer=Linux 4.9.211 ehci_hcd

S: Product=EHCI Host Controller

S: SerialNumber=ehci-platform

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA

I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

Re: Issue with NEXQ6GO-U Router and Quactel Modem

Posted: Thu Oct 14, 2021 10:41 am
by Didneywhorl
Thats it?

There should be one call USB Hub or something. That's what the modem uses on these modems, the USB bus.

Nothing in the debug about USB?

Re: Issue with NEXQ6GO-U Router and Quactel Modem

Posted: Thu Oct 14, 2021 10:41 am
by Didneywhorl
Ill look through your logs when I get a min to sit down at my pc.

Re: Issue with NEXQ6GO-U Router and Quactel Modem

Posted: Thu Oct 14, 2021 10:51 am
by gabe1475
Didneywhorl wrote: Thu Oct 14, 2021 10:41 am Ill look through your logs when I get a min to sit down at my pc.
thank you!