h721 router RM510Q module AND Quectel EM12

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
chuyeu123
Posts: 4
Joined: Tue Aug 24, 2021 1:17 pm
Has thanked: 0
Been thanked: 1 time

h721 router RM510Q module AND Quectel EM12

Post by chuyeu123 »

Hello,

I am new to the H721 router and got one of the new modules. When I tried to use my t-mobile sim in the slot of the EM12 it worked. However, when I switched it to the RM510Q I can't seem to connect to the network. The module recognizes the name of the sim and number and its unique code but no internet access. May I ask if anyone has used o have experience with this? Also, I've tried to register my device with sprint but they don't allow my IMEI number. Does anyone know how I may get this activated?

Thank you all again.
toddw
Posts: 158
Joined: Tue Aug 18, 2020 5:43 pm
Has thanked: 26 times
Been thanked: 68 times

Re: h721 router RM510Q module AND Quectel EM12

Post by toddw »

What APN are you using? I think the default APN is "internet" which does not work. Try going to modem, connection properties if I recall correctly and set the APN to fast.t-mobile.com. Also make sure you set the TTL correctly and the TTL for IPV6. There are write ups on this forum on the TTL settings.
toddw
Posts: 158
Joined: Tue Aug 18, 2020 5:43 pm
Has thanked: 26 times
Been thanked: 68 times

Re: h721 router RM510Q module AND Quectel EM12

Post by toddw »

Also, is the RM510Q in QMI or MBIM mode.
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: h721 router RM510Q module AND Quectel EM12

Post by Didneywhorl »

You may want to ensure the bands are not all locked out, and the modem is in MBIM mode. I also like to check to ensure its not set to only 5GNR in mode pref.
chuyeu123
Posts: 4
Joined: Tue Aug 24, 2021 1:17 pm
Has thanked: 0
Been thanked: 1 time

Re: h721 router RM510Q module AND Quectel EM12

Post by chuyeu123 »

Hello everyone.

Thank you so much for all of your answer. I did a soft reset from the firmware and it for some reason worked out of the box. I'll try to use your setting to see if there's an increasing in speed.

Thank you all
Post Reply

Return to “General and Unclassified”