Possible HW Failure EM7455

Sierra Wireless AirPrime Modem Card Topics
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
ericleslie
Posts: 8
Joined: Wed Mar 18, 2020 5:41 pm
Has thanked: 0
Been thanked: 1 time

Possible HW Failure EM7455

Post by ericleslie »

I've been running a Sierra Wireless EM7455 in the original The Wireless Haven USB3.0 To NGFF M.2 Key to an RPI4 with OpenWRT successfully for about a year now. I've had intermittent dropouts, but they were usually short and solved with a reboot. The Modem is no longer detected. I've always feared I wasn't powering the setup fully. I was running POE to the RPI and was powering the key with the USB3 and the aux micro-USB, also plugged into a spare port on the RPI4. I understand that is probably not enough power under load.

I was doing some troubleshooting and noticed that the key makes a buzzing sound when I only have the USB3 plugged in. Thinking I may have damaged the key, I just bought the updated Key that has the power upgrades. I'm also powering the RPI and the Key via their own dedicated power supplies now. The issue remains.

This is the dmesg output

Code: Select all

[ 4147.691846] usb 2-2: new SuperSpeed Gen 1 USB device number 9 using xhci_hcd
[ 4147.722689] usb 2-2: config 1 has an invalid interface number: 12 but max is 4
[ 4147.729915] usb 2-2: config 1 has an invalid interface number: 13 but max is 4
[ 4147.737170] usb 2-2: config 1 has an invalid interface number: 13 but max is 4
[ 4147.744416] usb 2-2: config 1 has no interface number 1
[ 4147.749676] usb 2-2: config 1 has no interface number 4
[ 4147.755520] usb 2-2: New USB device found, idVendor=1199, idProduct=9071, bcdDevice= 0.06
[ 4147.763714] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4147.770852] usb 2-2: Product: EM7455
[ 4147.774431] usb 2-2: Manufacturer: Sierra Wireless, Incorporated
[ 4147.785509] usb 2-2: Enable of device-initiated U1 failed.
[ 4147.791708] usb 2-2: Enable of device-initiated U2 failed.
[ 4147.813046] cdc_mbim 2-2:1.12: cdc-wdm0: USB WDM device
[ 4147.818840] cdc_mbim 2-2:1.12 wwan0: register 'cdc_mbim' at usb-0000:01:00.0-2, CDC MBIM, b2:f0:47:50:04:c4
[ 4147.829320] usb 2-2: Enable of device-initiated U1 failed.
[ 4147.835938] usb 2-2: Enable of device-initiated U2 failed.
[ 4208.622592] usb 2-2: USB disconnect, device number 9
[ 4208.628313] cdc_mbim 2-2:1.12 wwan0: unregister 'cdc_mbim' usb-0000:01:00.0-2, CDC MBIM
mmcli -L does not list any modems.

Is there any other troubleshooting I can do to see if it's actually the modem that's bad?

Thank you!
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: Possible HW Failure EM7455

Post by Didneywhorl »

Plug it into a PC and see if you experience dropouts there as well.
Post Reply

Return to “Sierra Wireless Modems”