No 5G on my RM502Q-AE is there a command?

Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
BV2020
Posts: 16
Joined: Mon Mar 30, 2020 12:52 pm
Has thanked: 1 time
Been thanked: 2 times

No 5G on my RM502Q-AE is there a command?

Post by BV2020 »

First the set up.

RM502Q-AE to 4x4 Mimo. 0 = A1 +45%, 1 = A2 +45%, 3 = A1 -45%, 4 = A2 -45%

All I am getting is B2. I have the same service as my phone which is getting 5G. Is there a way to turn on/off 5G that I am not aware of?

Are my antennas on the proper post?

I searched the forum, and can't find anything that I am doing wrong.

Any and all help is greatly appreciated.
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: No 5G on my RM502Q-AE is there a command?

Post by Didneywhorl »

Hello,

If you go the RM502Q listing on the thewirelesshaven.com site you will see how to setup the antenna ports to a 4x4 mimo panel.

Under the Antenna Connections tab. With pictures.

The outer two ports are one pair and the inner two are the second pair.

There are commands to lock to 5G or LTE or auto.

Code: Select all

AT+QNWPREFCFG="mode_pref",AUTO
....will allow the router to choose the best mode based on available bands.

You will also want to run:

Code: Select all

AT+QNWCFG="dss_enable",1
...this turns on an important feature

After running these two commands, run:

Code: Select all

AT+CFUN=1,1
...to reset the modem.

If you need the AT commands manual, this is also available on the listing at thewirelesshaven.com, under "Documentation" I believe.

https://thewirelesshaven.com/shop/modems/quectel- ... lar-modem/
BV2020
Posts: 16
Joined: Mon Mar 30, 2020 12:52 pm
Has thanked: 1 time
Been thanked: 2 times

Re: No 5G on my RM502Q-AE is there a command?

Post by BV2020 »

AT+QNWPREFCFG="mode_pref",AUTO

Resulted in "Modem is too busy" return. I literally laughed... What??

AT+QNWCFG="dss_enable",1

Froze the terminal... ??

AT+CFUN=1,1

Froze the terminal
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: No 5G on my RM502Q-AE is there a command?

Post by Didneywhorl »

looks like you have a router issue honestly. try to SSH in and send the commands
Post Reply

Return to “Quectel Modems”