Help: Band b41 no internet WG3526P/EM7411

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
Dre40
Posts: 30
Joined: Tue Dec 08, 2020 12:28 am
Has thanked: 14 times
Been thanked: 5 times

Help: Band b41 no internet WG3526P/EM7411

Post by Dre40 »

Anyone else using this band (tmobile)? Antenna/router used to always connect to b66 with CA from b71 or b12 with about the same RSRP/RSSI but higher RSRQ as b41. Today it was b41 has zero internet, resetting it won't switch (at first I thought it was just slower but my load balance was just failing over to my mofi WAN).

Tried everything on this list to fix (some mult times): https://wirelessjoint.com/viewtopic.php?f=21&t=14

Anyone know the AT-Command to remove band b41 (can't locate the big thread with these commands). WG3526-P with a Sierra Wireless CAT7 EM7411

B41
Current Time: 7866 Temperature: 29
Reset Counter: 2 Mode: ONLINE
System mode: LTE PS state: Attached
LTE band: B41 LTE bw: 20 MHz
LTE Rx chan: 40270 LTE Tx chan: 40270
LTE SCC1 state:NOT ASSIGNED
LTE SCC2 state:NOT ASSIGNED
LTE SCC3 state:NOT ASSIGNED
LTE SCC4 state:NOT ASSIGNED

PCC RxM RSSI: -75 PCC RxM RSRP: -101
PCC RxD RSSI: -90 PCC RxD RSRP: -119
Tx Power: -- TAC: 2c28 (11304)
RSRQ (dB): -6.9
SINR (dB): 9.6

B66 from other day (before this random change to b41)
LTE band: B66 LTE bw: 20 MHz
LTE Rx chan: 0 LTE Tx chan: 132322
LTE SCC1 state:ACTIVE LTE SCC1 band: B12
LTE SCC1 bw : 5 MHz LTE SCC1 chan: 5035
LTE SCC2 state:NOT ASSIGNED
LTE SCC3 state:NOT ASSIGNED
LTE SCC4 state:NOT ASSIGNED

PCC RxM RSSI: -63 PCC RxM RSRP: -105
PCC RxD RSSI: -68 PCC RxD RSRP: -110
SCC1 RxM RSSI: -60 SCC1 RxM RSRP: -91
SCC1 RxD RSSI: -66 SCC1 RxD RSRP: -97
Tx Power: 19 TAC: 2c28 (11304)
RSRQ (dB): -16.6
SINR (dB): -2.6
Dre40
Posts: 30
Joined: Tue Dec 08, 2020 12:28 am
Has thanked: 14 times
Been thanked: 5 times

Re: Help: Band b41 no internet WG3526P/EM7411

Post by Dre40 »

Replying to myself. Found this The list of AT commands: http://wirelessjoint.com/viewtopic.php?f=16&t=364&start=10 https://wirelessjoint.com/viewtopic.php?f=16&t=364

Worked great. THANK YOU @JimHelms for posting this SUPER nice spreadsheet. No more band b41 and much faster speeds, locked it to B66,B71,B12,B4. Thank you.,

New question: Is there a way to lock/force modem to do more then one SCC state (Carrier AG), or is that a tower/Carrier thing? I'm getting CA but only 1 extra band.

at!gstatus?
Reset Counter: 1 Mode: ONLINE
System mode: LTE PS state: Attached
LTE band: B66 LTE bw: 20 MHz
LTE Rx chan: 0 LTE Tx chan: 132322
LTE SCC1 state:ACTIVE LTE SCC1 band: B71
LTE SCC1 bw : 5 MHz LTE SCC1 chan: 0
LTE SCC2 state:NOT ASSIGNED
LTE SCC3 state:NOT ASSIGNED

LTE SCC4 state:NOT ASSIGNED

PCC RxM RSSI: -52 PCC RxM RSRP: -95
PCC RxD RSSI: -57 PCC RxD RSRP: -109
SCC1 RxM RSSI: -51 SCC1 RxM RSRP: -84
SCC1 RxD RSSI: -57 SCC1 RxD RSRP: -90
Tx Power: 20 TAC: 2c28 (11304)
RSRQ (dB): -18.3
SINR (dB): 2.0
toddw
Posts: 158
Joined: Tue Aug 18, 2020 5:43 pm
Has thanked: 26 times
Been thanked: 68 times

Re: Help: Band b41 no internet WG3526P/EM7411

Post by toddw »

I recall it maxes out at 2CA on the DL, but being a CAT7 modem, can do 2CA on the upload which gives it an edge.
Post Reply

Return to “General and Unclassified”