EM7411 QMI

Sierra Wireless AirPrime Modem Card Topics
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
PLP818
Posts: 3
Joined: Wed Dec 23, 2020 9:05 pm
Has thanked: 1 time
Been thanked: 0

EM7411 QMI

Post by PLP818 »

Does anyone know what the command is to put a EM7411 in QMI mode?
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: EM7411 QMI

Post by Didneywhorl »

Use

Code: Select all

AT!USBCOMP?
To see the current mode

Code: Select all

AT!USBCOMP=?/code] To see the options.
 
I'm not sure right now the specific QMI command for it.
PLP818
Posts: 3
Joined: Wed Dec 23, 2020 9:05 pm
Has thanked: 1 time
Been thanked: 0

Re: EM7411 QMI

Post by PLP818 »

It is in MBIM mode right now.

This is what I get from
AT!USBCOMP=?
!USBCOMP:
AT!USBCOMP=<Config Index>,<Config Type>,<Interface bitmask>
<Config Index> - configuration index to which the composition applies, should be 1

<Config Type> - 1:MBIM USBIF, 2:PCIE USBIF, 3:Legacy-Generic, 4:RNDIS

<Interface bitmask> - DIAG - 0x00000001,
NMEA - 0x00000004,
MODEM - 0x00000008,
RMNET0 - 0x00000100,
MBIM - 0x00001000,
e.g.
10D - diag, nmea, modem, rmnet interfaces enabled
1009 - diag, modem, mbim interfaces enabled

The default configuration is:
at!usbcomp=1,3,10F
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: EM7411 QMI

Post by Didneywhorl »

AT!USBCOMP=1,3,10D

That means = Index1, Legacy-generic, DIAG+NMEA+MODEM+RMNET0


RMNET is QMI controls if I recall correctly.
PLP818
Posts: 3
Joined: Wed Dec 23, 2020 9:05 pm
Has thanked: 1 time
Been thanked: 0

Re: EM7411 QMI

Post by PLP818 »

I finally got some time to try the command. When I use this command to put my modem in QMI mode. I lose com with my wg1608 router. It won’t connect to the modem. I get a time out error. But when I put it back into MBIM mode the router connects to it. The weird thing is that when I first got my modem in it came in QMI mode and it was working in the router.
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: EM7411 QMI

Post by Didneywhorl »

That is odd. Have you updated the firmware?

https://source.sierrawireless.com/resou ... -packages/
Post Reply

Return to “Sierra Wireless Modems”