Page 1 of 1
WiFix OpenVPN system using the wrong port
Posted: Tue Dec 15, 2020 10:23 am
by foolhardy
NEX6QGO running GoldenOrb_2020-04-04
I used an OpenVPN ovpn config file to setup my VPN in WiFix. It contains the server and port. The port is 1912.
Screen Shot 2020-12-15 at 10.21.30 AM.png
Why is WiFix using a different port than what is specified in the ovpn file?
Screen Shot 2020-12-15 at 10.22.32 AM.png
Re: WiFix OpenVPN system using the wrong port
Posted: Thu Dec 24, 2020 12:44 am
by Didneywhorl
One day I will play with the VPN stuff.
Hopefully a VPN guru that knows the rooter and WiFiX firmware chimes in.
Can you change it in the UI and it stay changed?
Re: WiFix OpenVPN system using the wrong port
Posted: Mon Jan 04, 2021 11:32 am
by foolhardy
Didneywhorl wrote: ↑Thu Dec 24, 2020 12:44 am
One day I will play with the VPN stuff.
Hopefully a VPN guru that knows the rooter and WiFiX firmware chimes in.
Can you change it in the UI and it stay changed?
How do you change it in the UI? I don't see where the port field can be edited.
Re: WiFix OpenVPN system using the wrong port
Posted: Wed Jan 06, 2021 11:51 am
by Didneywhorl
foolhardy wrote: ↑Mon Jan 04, 2021 11:32 am
How do you change it in the UI? I don't see where the port field can be edited.
By clicking edit next to the rule there in your picture.
Re: WiFix OpenVPN system using the wrong port
Posted: Wed Jan 06, 2021 6:18 pm
by foolhardy
Didneywhorl wrote: ↑Wed Jan 06, 2021 11:51 am
By clicking edit next to the rule there in your picture.
Unfortunately that does not provide a place to edit the port number, that I can see.
Re: WiFix OpenVPN system using the wrong port
Posted: Sun Jan 10, 2021 6:32 pm
by Didneywhorl
I tested this in non-WiFiX firmware, just rooter. It seems to be the same. May want to ask the Goldenorb guys over on the whirlpool forum.
https://forums.whirlpool.net.au/thread/ ... =-1#bottom