cradlepoint AER2200 band lock
Posted: Thu Sep 17, 2020 8:54 am
I have recently came into possession of a cradlepoint AER2200. It has a CAT18 modem installed that in software is referenced as a 1200M. I haven't pulled it apart to see if it actually lists which modem it is as I assume they don't make it, just rebrand it.
I am wanting to determine the commands to lock bands and then the command to set back to all bands when I turn back in. I have tried, which I probably shouldn't have, the commands found in another thread here https://wirelessjoint.com/viewtopic.php?f=21&t=201#p1333. It rejected the following command at!entercnd="A710" so I stopped there as obviously it doesn't apply and i realized it was reckless to just start slapping AT commands in that could brick this device.
I have been band locking and unlocking my Quectel modem so I am up on the process overall just not educated enough in this arena to find the commands for this modem and not potentially brick it!
Would anyone know the correct commands for this specific modem to band lock and then set back to all bands?
I am wanting to determine the commands to lock bands and then the command to set back to all bands when I turn back in. I have tried, which I probably shouldn't have, the commands found in another thread here https://wirelessjoint.com/viewtopic.php?f=21&t=201#p1333. It rejected the following command at!entercnd="A710" so I stopped there as obviously it doesn't apply and i realized it was reckless to just start slapping AT commands in that could brick this device.
I have been band locking and unlocking my Quectel modem so I am up on the process overall just not educated enough in this arena to find the commands for this modem and not potentially brick it!
Would anyone know the correct commands for this specific modem to band lock and then set back to all bands?