cradlepoint AER2200 band lock

Cradlepoint Router Topics
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
tlkelley
Posts: 3
Joined: Thu Aug 27, 2020 9:08 am
Has thanked: 0
Been thanked: 0

cradlepoint AER2200 band lock

Post by tlkelley »

I have recently came into possession of a cradlepoint AER2200. It has a CAT18 modem installed that in software is referenced as a 1200M. I haven't pulled it apart to see if it actually lists which modem it is as I assume they don't make it, just rebrand it.

I am wanting to determine the commands to lock bands and then the command to set back to all bands when I turn back in. I have tried, which I probably shouldn't have, the commands found in another thread here https://wirelessjoint.com/viewtopic.php?f=21&t=201#p1333. It rejected the following command at!entercnd="A710" so I stopped there as obviously it doesn't apply and i realized it was reckless to just start slapping AT commands in that could brick this device.

I have been band locking and unlocking my Quectel modem so I am up on the process overall just not educated enough in this arena to find the commands for this modem and not potentially brick it!

Would anyone know the correct commands for this specific modem to band lock and then set back to all bands?
Yipzy
Posts: 212
Joined: Wed Jan 30, 2019 2:06 am
Has thanked: 7 times
Been thanked: 82 times

Re: cradlepoint AER2200 band lock

Post by Yipzy »

tlkelley wrote: Thu Sep 17, 2020 8:54 am Would anyone know the correct commands for this specific modem to band lock and then set back to all bands?
The command you are looking for should be AT#BND via https://y1cj3stn5fbwhv73k0ipk1eg-wpengi ... ide_r1.pdf
tlkelley
Posts: 3
Joined: Thu Aug 27, 2020 9:08 am
Has thanked: 0
Been thanked: 0

Re: cradlepoint AER2200 band lock

Post by tlkelley »

I will download and look tomorrow, I appreciate your response.
Post Reply

Return to “Cradlepoint Routers”