CBA850 with MC400LP6 or MC400LPE-VZ ?

Cradlepoint Router Topics
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
freep
Posts: 19
Joined: Sat Aug 08, 2020 3:30 pm
Has thanked: 10 times
Been thanked: 0

CBA850 with MC400LP6 or MC400LPE-VZ ?

Post by freep »

I have a CBA850 and need to choose a modem for it. I will be using this in pass-through mode to a unifi USG and it will be used in an RV all over the country.

Which modem should I choose?

Any other recommendations or comments are welcome.

Oh and this is for Verizon service.
Yipzy
Posts: 212
Joined: Wed Jan 30, 2019 2:06 am
Has thanked: 7 times
Been thanked: 82 times

Re: CBA850 with MC400LP6 or MC400LPE-VZ ?

Post by Yipzy »

MC400LP6 if you must have CBA850. You will have problems with Verizon sim due to propriety router firmware. Its sim-based switching function will switch your modem's carrier config to Verizon firmware and config causing it to not work on Verizon for most phone sims but less with tablet sims. Generic firmware of the modem will work with your Verizon sim if there is a way to disable sim-based switching.

If you are after passthrough mode, you could use DMZ mode http://wirelessjoint.com/viewtopic.php?t=49 I would suggest you get EM06 or EM12 instead. Though with Verizon you are already NAT'd with a private ip.
Post Reply

Return to “Cradlepoint Routers”