Ethernet slower than WiFi?

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
LilAkka
Posts: 21
Joined: Sun Dec 16, 2018 9:04 pm
Has thanked: 7 times
Been thanked: 0

Ethernet slower than WiFi?

Post by LilAkka »

I finally managed to improve my setup a little. Two directional antennas mounted on my roof. Speeds have practically doubled. This also gave me an opportunity to connect my main computer via Ethernet. I thought this would be a huge improvement, but it’s actually really slow. WiFi is anywhere between 35 and 60 up. The Ethernet is not even getting 1. Is there something I need to configure in Goldenorb? What’s going on here? Also router is a WG3526
gscheb
Posts: 1595
Joined: Tue Sep 10, 2019 10:37 am
Has thanked: 85 times
Been thanked: 329 times

Re: Ethernet slower than WiFi?

Post by gscheb »

Is the ethernet in a lan port? Not wan?
Have you tried multiple lan ports?
Sure it isn't a bad ethernet wire?
LilAkka
Posts: 21
Joined: Sun Dec 16, 2018 9:04 pm
Has thanked: 7 times
Been thanked: 0

Re: Ethernet slower than WiFi?

Post by LilAkka »

It's lan, tried a few ports. Also a brand new ethernet cable, so I hope it's not bad.
Viper67857
Posts: 166
Joined: Wed May 13, 2020 7:04 pm
Has thanked: 12 times
Been thanked: 45 times

Re: Ethernet slower than WiFi?

Post by Viper67857 »

What is the link speed showing up in windows? If it's showing as 10mb half/duplex that would explain the throughput. A bad cable or NIC could cause this, or an accidental setting change to the adapter forcing it to 10.
LilAkka
Posts: 21
Joined: Sun Dec 16, 2018 9:04 pm
Has thanked: 7 times
Been thanked: 0

Re: Ethernet slower than WiFi?

Post by LilAkka »

I’m not even getting 1mb.
Viper67857
Posts: 166
Joined: Wed May 13, 2020 7:04 pm
Has thanked: 12 times
Been thanked: 45 times

Re: Ethernet slower than WiFi?

Post by Viper67857 »

Not the actual throughput, the negotiated link speed displayed in the connection properties... If it's not showing 1000 then something is wrong with cabling/ports.
Post Reply

Return to “General and Unclassified”