No Aggregation - Slow Speed

Topics Related to Cell Towers, Frequencies and Bands
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
rfaulkner99
Posts: 6
Joined: Sun Jun 14, 2020 7:34 pm
Has thanked: 0
Been thanked: 0

No Aggregation - Slow Speed

Post by rfaulkner99 »

Hi, can someone help me find out why I am not seeing any CA on a NEXQ6GO with an EM12 modem on AT&T? I am new to this, thanks.

Image
Viper67857
Posts: 166
Joined: Wed May 13, 2020 7:04 pm
Has thanked: 12 times
Been thanked: 45 times

Re: No Aggregation - Slow Speed

Post by Viper67857 »

Do you have it locked to band 2? That's a fairly high-frequency band and your signal isn't good... It would normally seek out a 'worse' band with better signal if it's not locked. You definitely need to work on your signal either way.
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: No Aggregation - Slow Speed

Post by Didneywhorl »

Use WiFi on this model to test speeds, and change your Signal Info screen to "fast" update (15 seconds) and make sure you hit the apply change button. Then scroll to the spot that shows your frequency Band (B12, etc). Then run a speed test. Watch that spot where it shows Band and CSQ, etc. If it hits CA it will show there.
Also I believe the AT command to see the CA info is

Code: Select all

AT+QCAINFO
Post Reply

Return to “Towers, Frequencies and Bands”