WiFi WG3526 and EM20-G

Topics related to OpenWRT, LEDE, GoldenOrb, Linux and other firmware
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
autovet
Posts: 10
Joined: Sun Jun 07, 2020 8:58 pm
Has thanked: 0
Been thanked: 0

WiFi WG3526 and EM20-G

Post by autovet »

I downloaded and installed the latest firmware on this site for using the EM20 modem, but the WiFi does not work any more. It shows a 5g portion but no 2.4g section in the setup UI. I tried to use the 5g signal but it doesn't show up on any of my devices.
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: WiFi WG3526 and EM20-G

Post by Didneywhorl »

Sometimes flashing firmware does odd things. I ALWAYS use the bootloader method to load firmware. THEN load it AGAIN in the UI, always making sure to UNCHECK the "Keep Settings" option. I take it a step further and load it AGAIN in the UI. For me thats 3x I load it fresh with no settings changes on anything between flashes.

https://wirelessjoint.com/viewtopic.php?t=5
Post Reply

Return to “Firmware”