Page 1 of 1
Is there an AT command that will make the Quectel EM20 G carrier aggregate with 3 bands?
Posted: Mon Jun 15, 2020 8:31 pm
by GeraldJ
I used the AT command to group bands 4 13 and 66 however the modem will only aggregate to 2 of the bands either 66 and 13 or 4 and 13 but not all 3
Re: Is there an AT command that will make the Quectel EM20 G carrier aggregate with 3 bands?
Posted: Mon Jun 15, 2020 11:35 pm
by gscheb
GeraldJ wrote: ↑Mon Jun 15, 2020 8:31 pm
I used the AT command to group bands 4 13 and 66 however the modem will only aggregate to 2 of the bands either 66 and 13 or 4 and 13 but not all 3
Hello,
Modems only do certain combinations of bands. The combination you are trying to get don't see it listed on The Wireless Haven website.
Refer to this.
https://thewirelesshaven.com/shop/modems/quectel- ... 2-modem-2/
Re: Is there an AT command that will make the Quectel EM20 G carrier aggregate with 3 bands?
Posted: Thu Jun 18, 2020 9:05 pm
by GeraldJ
Thank you !