Intermittent carrier aggregation

Misc Mini PCI-E and M.2 Modem Card and USB Dongle Topics
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
dsnmav
Posts: 1
Joined: Sat Jun 06, 2020 10:42 pm
Has thanked: 0
Been thanked: 0

Intermittent carrier aggregation

Post by dsnmav »

I have a Quectel EP06-A that will not keep up carrier aggregation on a second band. It is locked on Band 4 all the time but only intermittently aggregates Band 12. More often than not, it doesn't. Band 12 comes in just as well as Band 4 from the same tower, and the connection seems solid enough (see below). I'm not sure what's going on. Is it my modem/setup or maybe the tower? If it's on my end, is there anything I can tweak? (I've looked around but have not seen anything on point--hence posting here.)

Setup:
  • Modem -> USB enclosure -> RaspberryPi 3b+ running ROOter
  • Proxicast omni-directional paddle antennas
  • T-Mobile unlimited plan of some kind
  • ~2 miles near LOS to the tower (a few bushy tree branches from a single tree a few yards from the house)
Average connection stats:
  • CSQ: 25-27
  • Signal Strength: 80-87%
  • RSSI: -59-63 dBm
  • RSRQ: -7-8 dB
  • RSRP: -88 dBm
  • Speed is generally around 20 Mbps in both directions, somethings up to 30 Mbps down briefly
Any ideas?
gscheb
Posts: 1595
Joined: Tue Sep 10, 2019 10:37 am
Has thanked: 85 times
Been thanked: 329 times

Re: Intermittent carrier aggregation

Post by gscheb »

Typicaly carrier aggregation only comes on under load. Not there All the time.
If you run a speed test and it come on during downlaod it is working. EP06 does not do upload CA
Post Reply

Return to “Misc Modem Cards and Dongles”