UNLOCK NETGEAR MR2100 (M2)

[Alparslan]

Hello, I have a Netgear M2 router and it is locked to the Ooredoo Kuwait network and I want to unlock it. I tried to contact the rich but I could not reach him. Can anyone help me?

[ZzzzShinzzzZ]

@Rich Hathaway he need your help

[Rich Hathaway]

I wont be much help unlocking this device, I do not know much about it, I have one here but it is borked, I need a good device to make a firmware build from it and to do some study on it.

[Hogwild]

Hey Rich:

Have you attempted to connect to that MR2100 via a serial interface yet?

[Rich Hathaway]

Yes but the one I have is dead board and needs to be reloaded from 0 so far could only find 9008 mode which cannot work
because we have no loader for it yet.

[Hogwild]

Yes but the one I have is dead board and needs to be reloaded from 0 so far could only find 9008 mode which cannot work
because we have no loader for it yet.

Maybe I'm misunderstanding you, but just so people are clear, "dead" usually means the hardware is fried and/or won't power on. That modem's board powers on fine. It just doesn't finish booting.

[Rich Hathaway]

Maybe I'm misunderstanding you, but just so people are clear, "dead" usually means the hardware is fried and/or won't power on. That modem's board powers on fine. It just doesn't finish booting.

When I use that term I mean the board gives no ports or try's to load any driver when plugged and does not boot which is the state this board that I have here is in, I do not have any lcd connected to it.

IMG_3594.jpg