Someone sent me this device to look at and since I just did the T9 I took a look at it.
It is basically just a t9 with a slightly bigger screen and a slightly diff board layout but almost the same
It is so similar I loaded t9 firmware to it and it runs fine with it.
You can see here my clone of t9 firm running on the t10
partitions are all the same for the 2 devices
This is my t10 firmware
as of now there is no easy way to open the ports on the t10
I have not yet decrypted the backup/restore config to try that way, I will do that next.
anyone else have info on this device?
FRANKLIN T10 AKAXHG-RT410 THREAD
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
- Rich Hathaway
- Posts: 552
- Joined: Mon Mar 08, 2021 2:41 pm
- Has thanked: 8 times
- Been thanked: 190 times
FRANKLIN T10 AKAXHG-RT410 THREAD
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1
- Joined: Mon Mar 11, 2024 1:03 pm
- Has thanked: 0
- Been thanked: 0
Re: FRANKLIN T10 AKAXHG-RT410 THREAD
Ok I have a t10. I want to unlock it or get it to where I can use T-Mobile MVNOs on it. I tried a boost mobile sim and family mobile sim as well as a T-Mobile sim that was already activated to a cell phone. I tried changing the APN to a dozen different things. No internet still. How difficult would it be to flash t9 firmware to it and then unlock? I have no PC and have never flashed anything. I wish I could just unlock it somehow. It has a place to enter an unlock code but everyone says it’s impossible. The why did they include a place where you can put an unlock code? Besides I think there is FCC regs that make it so there has to be a way. I’m sure T-Mobile has a way to generate a code but will only reveal if forced by law.