Zyxel NR5103e & Poynting XPOL-0002-V3

Questions and Support related to Antennas & Cables
Forum rules
Use the SEARCH function for related issues PRIOR to posting for assistance.
Post Reply
CivilDrone
Posts: 2
Joined: Mon Feb 05, 2024 8:11 am
Has thanked: 0
Been thanked: 1 time

Zyxel NR5103e & Poynting XPOL-0002-V3

Post by CivilDrone »

Afternoon,
Not sure if i am in the right section or how stupid this sounds
Very little knowledge when it comes to frequncies, wires, radio waves
I would like to use the router with the antenna
Problem is antenna is 2x2 mimo and router is 4x4
Am i able to use an adaptor SMA to TS9 or SMA to x2 TS9 splitter?
Which solution is best (if any) and is there drawbacks
Thank you
User avatar
Didneywhorl
Posts: 3604
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1352 times
Been thanked: 750 times
Contact:

Re: Zyxel NR5103e & Poynting XPOL-0002-V3

Post by Didneywhorl »

Ts9 to sma, yes. I would never use any rf cable splitters or "Y cables" as it just shorts your antenna ports together; bad.

As long as you have the specs on the ports as to which are the primary pair, you can use those two for the outdoor antenna.
CivilDrone
Posts: 2
Joined: Mon Feb 05, 2024 8:11 am
Has thanked: 0
Been thanked: 1 time

Re: Zyxel NR5103e & Poynting XPOL-0002-V3

Post by CivilDrone »

Thank you very much
Ordered pigtails SMA to TS9
Will look into the ports on the router
Post Reply

Return to “Questions and Support”