Updating GO Firmware

Topics related to OpenWRT, LEDE, GoldenOrb, Linux and other firmware
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
dbshelton
Posts: 326
Joined: Sun Jul 18, 2021 6:41 am
Has thanked: 4 times
Been thanked: 28 times

Updating GO Firmware

Post by dbshelton »

I have been trying to update the Golden Orb (Rooter) firmware on my routers. No problem with my TP-Link A7 and GLInet 1300. When updating my Linksys WRT3200ACM and Miktotik GR750 I was unsuccessful. Neither one of those will work anymore. I can't even access them at all. What did I do wrong? I am not sure what to do next
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: Updating GO Firmware

Post by Didneywhorl »

Recovery mode should be available on all devices with Rooter previously installed. SHOULD.

Power down, hold in reset button, power on, wait 12 seconds, release reset button, log in to 192.168.1.1.

Might need to manually assign pc interface to 192.168.1.x subnet.

Last resort is UART/TTL serial interface.
Post Reply

Return to “Firmware”