FG2000 questions issues

[giboni]

Bought one slightly used on fleec bay. Maybe ?

US Cellular unit FG2000 - 3

Originally on Verizon. After numerous hours. US Cellular chat. Finally. Can connect to 4Glte.

US C, Tech stated. In order for it to be stable on 5G. Needs an update ! Sure it connects Solid Blue...but no Internet access

Other issues. Lan Wan ports greyed out on US C Home page.
" " Pushing the reset button does nothing

Doing it from the settings page. Unit resets. Finally showed internet access on Laptop 4GLTE.

Apparently. I can save a Config. File. Is it possible to simply install a copy of the config file from another Unit on US Cellular

into my unit that functions properly on 5G ? Lan wan ports functioning.

The last update is NONE

IPQ-SDX55MOR-2.41-2.422-1.44-182-182 07/30/2021

Software Components

Manufacturer:Inseego
Model name:FG2000-3
Model number:FG2000-3
Modem version:SDX55MOR-2.41
IPQ version:1.44
Bolt PRI Version:182
IPQ PRI Version:v182
HW Version:4
Cute Version:3N

Any help appreciated

Best John Lancaster County Nebraska

[Rich Hathaway]

Yes you can load the backup from another device to it, it will take it.

[giboni]

Fantastic ! Thank you for the reply.

Now I need a donor to send me a good copy of their backup file !! LOL

[Rich Hathaway]

here is a stock config from it, not convinced it will do what you want it to but here it is.

config.tar.gz

If you take this file please don't forget to hit thank you

[giboni]

Yummy

[HalfOgre]

In inseego docs thay write that backup file is "tied" to device it comes from and will not restore on any other device.

[Rich Hathaway]

yes and the government tells you that a hammer cost 500 bucks when they buy one, Don't believe everything you hear.
if you have the Qualcomm variant of the fg2000 this will work on it, if you have the IPQ one don't load it, if you do and it does load you can/will have probs.

I have not seen the IPQ-chipped variant yet but I am pretty sure any backup from that device can also be loaded to others of the same makeup.

There are not too many of the IPQ-chipped devices out there, but you should still check it to be sure.

[apachedalton]

hello does anyone happen to have a backup config file and /or a firmware file from an fg2000-3 for t-mobile or a custom firmware and /or config file not from uscellular problem with uscellular units and or backup or firmware file is uscellular only has one band open to receive 5g speeds and this unit is capable of 5 or 6 bands for 5g thank you in advancefor any and all help

[Rich Hathaway]

I have a build of the us cellular firm that I made from a working device and can rebrand it but it is not needed to change bands, I hear Verizon is getting this model and that firm will likely be much more cross-carrier friendly but your bigger challenge will be getting the ports enabled so some work can actually be done on it.

[apachedalton]

thanks for your response rich ive seen some of your posts on other forums also apways good stuff i actually learn things from them the problem is here that US Cellular stock firmware locks several of the bands that tmobile uses i am running this fg2000 under my tmobile home internet account but with this unit having stock US Cellular firmware on it signal strength upload download speeds just everything is way below what this unit is capable of I am in a 5g ultimate coverage area and my speeds are under 5mbs for downloads and in kbs on uploads I was also trying to findout where to tap in to the internal antennas to try hooking up some external mimo antennas i know this unit has the ts9 hook up for external antennas but it only supports certain bands that tmobile does not use so they are of coarse useless to me

[apachedalton]

And yes Rich i do understand that the firmware does not need to be rebranded I just need a modded US Cellular firmware that has all the bands unlocked and i still would like to tap into the internal antenna hook ups to try hooking up some external mimo antennas to see what results i get i have had this unit apart and cut holes in the outer shell to have access to the 3.0 usb port and the phone plug in port if inseego ever enables it

[Rich Hathaway]

There is a upgrade package they want to sell you for it that enables the phone port, second sim slot if your device has one and some other bands and features, it cost 200 bucks, and is imo a rip off, they charge peeps 1500 for these then say here pay me 200 more to make it work as it was built to....as soon as I get one with this package on it I will reverse engineer it and make a build from it.
I can enable all bands on it but still the carrier ag is blocked on it, I got CA working for 2 band CA on a friends who is out of the country and his speed increased but still only to about 160, far less than this device is capable of, I have not had time to work further on it, like I said before it will be much easier to make a build from the verizon or the fg2000e device and load it to this one.