NEXS2GO unused power points

Topics related to WiFiX branded routers
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
Kicknazz
Posts: 1
Joined: Tue May 24, 2022 1:28 pm
Has thanked: 0
Been thanked: 0

NEXS2GO unused power points

Post by Kicknazz »

WiFiX NEXS2GO 4G 5G Ready Router with Dual Band (2.4GHz-5GHz) WiFi

Want to know if there was any 12v or 5v unused power sources on the board. Looking to power a fan. I don't want to hook up to something I shouldn't. I can solder but Identifying what I can and cant touch isn't a skill I've acquired. Worst case scenario I'll run a usb from an outlet.

Thanks, Jake
taurolyon
Posts: 5
Joined: Sat Feb 05, 2022 2:09 pm
Has thanked: 1 time
Been thanked: 2 times

Re: NEXS2GO unused power points

Post by taurolyon »

I would recommend the solder points for the power input barrel plug, this is at 12V at between 3-4A. As long as the fan isn't drawing more than ~150 milliamps, it should not affect the router.

Just note, this fan will be on constantly, with no means to control the speed. This would require an additional PWM control.
Post Reply

Return to “WiFiX Routers”