Linksys EA3500 with Goldenorb MC7455 QMI Mode

LinkSys Router Topics
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
feudalkaos
Posts: 14
Joined: Fri Jul 24, 2020 2:24 pm
Has thanked: 15 times
Been thanked: 1 time

Linksys EA3500 with Goldenorb MC7455 QMI Mode

Post by feudalkaos »

I have a Linksys EA3500 router with GoldenOrb_2020-03-01 ( OpenWrt 18.06.7 ) installed. Connected to the USB port I have a MC7455 modem.

When this modem is in MBIM mode it seems to work as expected.

When it is in QMI mode the modem is found and even shows that it is connected to the network (T-Mobile). Using AT commands I can see that the modem does appear connected. It reports that it has an IPV6 external address. When I go to the overview page on Goldenorb the Network section shows Not Connected for both the IPV4 Upstream and IPV6 Upstream.
Adm1jtg
Posts: 395
Joined: Sat Aug 08, 2020 7:19 pm
Has thanked: 8 times
Been thanked: 116 times

Re: Goldenorb MC7455 QMI Mode

Post by Adm1jtg »

Back when I was first setting up my system I messed with trying to get QMI working as well and never did get it to work. I ended up just using MBIM mode and never looking back.

Is there a reason you are trying to use QMI, other then reading in some forums its faster and better and the like?

As honestly it seems like a big PIA and if I recall is an older protocol
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: Goldenorb MC7455 QMI Mode

Post by Didneywhorl »

I've found that QMI doesn't do well for me on Verizon nor T-mobile. I just default to MBIM for everything now.
vigilant
Posts: 15
Joined: Thu Nov 17, 2022 9:04 am
Has thanked: 0
Been thanked: 2 times

Re: Goldenorb MC7455 QMI Mode

Post by vigilant »

Didneywhorl wrote: Mon Jun 21, 2021 6:08 pm I've found that QMI doesn't do well for me on Verizon nor T-mobile. I just default to MBIM for everything now.
Same here, Its becasue the QMI interface does not support 464xlat networking.
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: Goldenorb MC7455 QMI Mode

Post by Didneywhorl »

vigilant wrote: Tue Nov 29, 2022 5:44 pm
Didneywhorl wrote: Mon Jun 21, 2021 6:08 pm I've found that QMI doesn't do well for me on Verizon nor T-mobile. I just default to MBIM for everything now.
Same here, Its becasue the QMI interface does not support 464xlat networking.
I didn't know that. Are joo chure?
User avatar
macuseri686
Posts: 44
Joined: Mon Oct 17, 2022 6:39 pm
Has thanked: 11 times
Been thanked: 13 times

Re: Goldenorb MC7455 QMI Mode

Post by macuseri686 »

Didneywhorl wrote: Mon Dec 05, 2022 9:37 am
vigilant wrote: Tue Nov 29, 2022 5:44 pm
Didneywhorl wrote: Mon Jun 21, 2021 6:08 pm I've found that QMI doesn't do well for me on Verizon nor T-mobile. I just default to MBIM for everything now.
Same here, Its becasue the QMI interface does not support 464xlat networking.
I didn't know that. Are joo chure?
if that is true, it would explain why NSA and SA modes dont work at all in QMI, but do work in mbim, and only 4g lte works with QMI on tmobile
Post Reply

Return to “LinkSys Routers”