How to set up NEXQ6GO-M to failover from copper to cellular?

Topics related to OpenWRT, LEDE, GoldenOrb, Linux and other firmware
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
hpark777
Posts: 3
Joined: Wed Jul 22, 2020 11:02 am
Has thanked: 1 time
Been thanked: 1 time

How to set up NEXQ6GO-M to failover from copper to cellular?

Post by hpark777 »

Hey guys I'm wanting to set up my NEXQ6GO with failover and I'm just not understanding how. I have Windstream cable but would like it to failover to wireless because Windstream is not reliable at the best of times... Could anyone here help me with this? I'm sure I'm just not understanding something small. Currently, it defaults to Cellular but would like it to default to copper and then fail over to cellular if need be.
User avatar
Didneywhorl
Posts: 3244
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1233 times
Been thanked: 645 times
Contact:

Re: How to set up NEXQ6GO-M to failover from copper to cellular?

Post by Didneywhorl »

Good video here:

You will need MWAN3. If that is not in your firwmare build, you can try and add it, or if that fails ask wireless haven for a version with MWAN3 in it, or ask the Rooter guys for a version of firmware that works with your router with MWAN3 already in there: https://forums.whirlpool.net.au/thread/ ... =-1#bottom
Post Reply

Return to “Firmware”