NEXQ6GO-M loadbalance 50/50 with cellular/wan

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
tonymn
Posts: 4
Joined: Sat Aug 01, 2020 9:53 am
Has thanked: 0
Been thanked: 0

NEXQ6GO-M loadbalance 50/50 with cellular/wan

Post by tonymn »

Hello I cannot get this to have both connections active. I thought i had set up correctly. When i fail to test, i can fail to wan away from cellular. I cannot fail from wan to cellular. It pings cell once and then the wan1(cellular) goes inactiveRED.
User avatar
JimHelms
Site Admin
Posts: 1361
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 192 times
Contact:

Re: NEXQ6GO-M loadbalance 50/50 with cellular/wan

Post by JimHelms »

Check to make sure connection monitor is disabled in the modem profile.

I seem to remember it will not play fair with load balancing/failover.
Post Reply

Return to “General and Unclassified”