WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Topics related to OpenWRT, LEDE, GoldenOrb, Linux and other firmware
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
User avatar
JimHelms
Site Admin
Posts: 1361
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 192 times
Contact:

WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by JimHelms »

UPDATE 03-08-2019: Our latest WiFiX 2019 version of GoldenOrb is now available. It contains an internal ping script that runs in the background that resets/reboots the modem that may be used in conjunction with the Connection Monitor.

UPDATE 02-2021: Our latest WiFiX 2021

As always when upgrading a router's firmware, be certain to UNCHECK the box to Save Settings.

The stable build of GoldenOrb 2019 can be downloaded from HERE.

WE826 | WG3526 | WE1326 | WE1026-5G OEM OpenWRT firmware
User avatar
dajmanjt
Posts: 13
Joined: Tue Jul 10, 2018 11:23 am
Has thanked: 13 times
Been thanked: 2 times

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by dajmanjt »

Hey Jim have you tried out the wg3526 version of your firmware? I'm assuming it's the same 8-17 firmware that was posted in the upload folder of Rooter (http://ofmodemsandmen.com/upload/). I tried it and it won't let me past the splash screen. It errors out and won't let me login. The splash screen works fine, but I had to flash back to 8-14 with no splash screen to get into the actual rooter menu. Any info would be great. Thanks!
User avatar
JimHelms
Site Admin
Posts: 1361
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 192 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by JimHelms »

Yes, there is a Read Me text document that, among other things, addresses this issue. For convenience, I will list the contents below:
Firmware should only be updated using an Ethernet cable from the
LAN port of the router to the PC/Laptop network (ethernet) plug.

Using WiFi to update a firmware should be avoided when possible.

When updating the firmware, one should always UNCHECK the box to Save Settings.

The default login informtion is:

IP: 192.168.1.1
User: root
Password: admin

The WiFi login is:
SSID: wifix
Password: 12345678

If login problems are experienced, clear the cache in your web browser.

This can normally be done with the browser open, click on the top of the browser,
and press and hold the Ctrl key while pressing the F5 key.

Some browsers require different methods to clear the cache. For instance, in Google Chrome:


1. On your computer, open Chrome.
2. At the top right, click More .
3. Click More tools Clear browsing data.
4. At the top, choose a time range. To delete everything, select All time.
5. Next to "Cookies and other site data" and "Cached images and files," check the boxes.
6. Click Clear data.

Also you can do a google search for "clearing cache in (the name of your web browser)" for instructions.

WiFi Settings:

The default WiFi country code is set to US. This provides 30dBm on 2.4Ghz and the 5Ghz has access
to all the channels with TX power from 23dBm to 30dBm depending on the channel.

It is recommended to use the default WiFi settings on the router.
User avatar
dajmanjt
Posts: 13
Joined: Tue Jul 10, 2018 11:23 am
Has thanked: 13 times
Been thanked: 2 times

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by dajmanjt »

Thanks Jim!
User avatar
daniel.hulse
Posts: 11
Joined: Fri Jul 27, 2018 3:50 am
Has thanked: 1 time
Been thanked: 2 times

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by daniel.hulse »

Jim,
Does the WG3526/goldenorb support site-to-site VPN?
User avatar
JimHelms
Site Admin
Posts: 1361
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 192 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by JimHelms »

daniel.hulse wrote: Fri Oct 05, 2018 6:14 pm Jim,
Does the WG3526/goldenorb support site-to-site VPN?
This I do not know. Might ask over in the ROOter forum.
Cheburashka
Posts: 7
Joined: Sun Apr 15, 2018 1:39 am
Has thanked: 0
Been thanked: 1 time

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by Cheburashka »

Is there a list of features/specs somewhere, how is this firmware different than r00ter?
marcusa
Posts: 4
Joined: Fri May 11, 2018 11:53 pm
Has thanked: 0
Been thanked: 0

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by marcusa »

Cheburashka wrote: Tue Oct 23, 2018 5:35 pm Is there a list of features/specs somewhere, how is this firmware different than r00ter?
I second this.

Even with this firmware I still have connection issues on Android (Samsung, to be exact). WiFi stays on but Internet stops working and Android switches over to 4G. Is it the WiFi or is it something else?
reto.sommer
Posts: 7
Joined: Fri Dec 28, 2018 8:57 am
Location: NorCal
Has thanked: 0
Been thanked: 1 time

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by reto.sommer »

+1
would also like to know the difference between the WiFix firmware and standard Rooter? Also, who assembles/compiles and maintains the packages. What was the purpose of the variation?
User avatar
JimHelms
Site Admin
Posts: 1361
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 192 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by JimHelms »

reto.sommer wrote: Tue Jan 01, 2019 9:27 am +1
would also like to know the difference between the WiFix firmware and standard Rooter? Also, who assembles/compiles and maintains the packages. What was the purpose of the variation?
The WiFiX version is based on a newer kernel than the stable release 2017 version of GoldenOrb. This allows a modem to be run in QMI composition.

It also has support for the EM7565 and other newer and not so commonly used modems.

It includes a custom Firewall page/tab for Custom TTL rules.

A splash page is added with Live Time network stats to better help aim an antenna.

The WiFiX version is compiled and maintained by Dairyman who compiles all GoldenOrb builds.

The new GoldenOrb builds (not yet available from the GoldenOrb download page) are (and will be) compiled with most of the items above, less the Splash page with Live stats.

The new WiFiX versions on the next release will also not have the Splash page. But, we will offer it on the forum to install as a separate package.
reto.sommer
Posts: 7
Joined: Fri Dec 28, 2018 8:57 am
Location: NorCal
Has thanked: 0
Been thanked: 1 time

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by reto.sommer »

JimHelms wrote: Tue Jan 01, 2019 9:55 am The WiFiX version is based on a newer kernel than the stable release 2017 version of GoldenOrb. This allows a modem to be run in QMI composition.

It also has support for the EM7565 and other newer and not so commonly used modems.

It includes a custom Firewall page/tab for Custom TTL rules.

A splash page is added with Live Time network stats to better help aim an antenna.

The WiFiX version is compiled and maintained by Dairyman who compiles all GoldenOrb builds.

The new GoldenOrb builds (not yet available from the GoldenOrb download page) are (and will be) compiled with most of the items above, less the Splash page with Live stats.

The new WiFiX versions on the next release will also not have the Splash page. But, we will offer it on the forum to install as a separate package.
Thanks Jim.

Glad to hear there is active firmware support for the routers you offer. PS: got the 3526 up and running in no time.
dmnamibia
Posts: 2
Joined: Sat Jan 05, 2019 3:59 pm
Has thanked: 0
Been thanked: 0

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by dmnamibia »

How do we load the WE826-Modem Manager-APN-12-1-18.bin as a stand alone flash?. The WiFi don't start and I cant access via Ethernet cable? Something I should read?
User avatar
JimHelms
Site Admin
Posts: 1361
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 192 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by JimHelms »

dmnamibia wrote: Tue Jan 08, 2019 12:42 pm How do we load the WE826-Modem Manager-APN-12-1-18.bin as a stand alone flash?. The WiFi don't start and I cant access via Ethernet cable? Something I should read?
Try https://192.168.1.1

Also, you may prefer to use this later build:
WE826-ModemManager-12-31-2018.bin
You do not have the required permissions to view the files attached to this post.
dmnamibia
Posts: 2
Joined: Sat Jan 05, 2019 3:59 pm
Has thanked: 0
Been thanked: 0

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by dmnamibia »

Could not use ModemManager lack of know how.

826-T_826-WD_ndis_V1.2_20180629_UPGRADE.bin [to load this I had to do the 30-30-30 reset]

The above is the only .bin file picking up my Three Flags (China) LTE LM 9265 modem Cat4 that arrived with my WE826 t(e) in 2016 - I could get it working assigning USB 0 but major problems with reliability and my ignorance

Some data-----from 826-T---

Code: Select all

STATUS
OVERVIEW
Model:   AWF5  ????
SCAN M
Module: Ready   /dev/ttyUSB0----/dev/ttyUSB4 (Nothing)
AT Port: Check...ttyUSB1
SIM Card:Check... Instered
AT+CSQ:Check...+CSQ: 19,109,16
Service Provide: Check...+COPS: 0,0,"TN mobile",7  [Namibia provider]
AT+REG: Check...+CREG: 0,1
AT^SYSINFO":Check...^SYSINFO: 2,3,0,9,1
NETWORK
4G
3/4G:Enable .. IMEI:86223402258xxxx .. [Correct]
Info:MAC-Address: IP: RX: TX: [nothing] 
Sim:  4G  + pic
APN: internet
Interfaces - 4G
Status  3g-4g RX: 0.00 B (0 Pkts.) TX: 0.00 B (0 Pkts.)
APN internet
Question: Why is none of the other (bin) files picking up Eth0 modem

Do I have to configure bridges and routes?
Jim S.
Posts: 19
Joined: Mon Sep 24, 2018 12:02 pm
Has thanked: 0
Been thanked: 2 times

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by Jim S. »

What is the difference between the 2018-09-02 and 2019-01-13 versions of GoldenOrb? Just bug fixes, or different features?
User avatar
JimHelms
Site Admin
Posts: 1361
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 192 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by JimHelms »

Jim S. wrote: Wed Feb 20, 2019 2:31 pm What is the difference between the 2018-09-02 and 2019-01-13 versions of GoldenOrb? Just bug fixes, or different features?
Each new version of GoldenOrb usually fixes or tweaks something and adds more modems. It may also add or remove certain features. I do not know there is a lot of difference between the two builds you mention.

I personally prefer to use the lasted version.
Yipzy
Posts: 212
Joined: Wed Jan 30, 2019 2:06 am
Has thanked: 7 times
Been thanked: 82 times

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by Yipzy »

@JimHelms, do you still have the link to the earlier version of WiFix GoldenOrb firmware for WG3526? I am experiencing poor wifi thru-put on 2.4GHz with the latest. I have already tried the modem manager firmware for WG3526 and still yielded the same result. Thanks in advance.
User avatar
JimHelms
Site Admin
Posts: 1361
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 192 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by JimHelms »

I would use the Firmware Recovery Mode to upload the firmware.

That should assure there is nothing left behind from the previous build.

It is also required when going from a newer kernel build to an older one.

These are some of the builds I have. I am not sure which is what or the difference in them.

lede-wg3526-GO2017-12-15-upgrade.bin
openwrt-wg3526-GO2018-05-24-upgrade.bin
openwrt-wg3526-GO2018-09-02-upgrade.bin
openwrt-wg3526-GO2019-01-13-upgrade.bin
You do not have the required permissions to view the files attached to this post.
Yipzy
Posts: 212
Joined: Wed Jan 30, 2019 2:06 am
Has thanked: 7 times
Been thanked: 82 times

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by Yipzy »

Thanks a lot @JimHelms and the heads up about firmware recovery mode.

My WiFi bandwidth on 2.4GHz did improve. Do you happen to have the WG3526 WiFix version openwrt-wg3526-GO2019-01-13-upgrade.bin somewhere? I couldn't find it anywhere. I would like to be on the second most recent build before the latest one with wifi issues.
User avatar
JimHelms
Site Admin
Posts: 1361
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 192 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by JimHelms »

Included it above.
curdean
Posts: 4
Joined: Thu Jul 19, 2018 2:43 pm
Has thanked: 0
Been thanked: 0

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by curdean »

JimHelms wrote: Tue Jan 01, 2019 9:55 am The new WiFiX versions on the next release will also not have the Splash page. But, we will offer it on the forum to install as a separate package.
Jim,

Where would the link to download the splash page be found?
Thank you,
Curdean
User avatar
JimHelms
Site Admin
Posts: 1361
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 192 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by JimHelms »

This is one of the versions. You can try it. There is an instruction readme file.
ROOter_splash-master.zip
You do not have the required permissions to view the files attached to this post.
curdean
Posts: 4
Joined: Thu Jul 19, 2018 2:43 pm
Has thanked: 0
Been thanked: 0

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by curdean »

Thank you
aaron.brisendine
Posts: 5
Joined: Tue Jun 25, 2019 2:38 am
Has thanked: 0
Been thanked: 0

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by aaron.brisendine »

JimHelms wrote: Sat May 04, 2019 2:47 pm This is one of the versions. You can try it. There is an instruction readme file.

ROOter_splash-master.zip
The only thing I seen in the readme file was too place the www folder on the device....it doesn't say where on the device to place the file or how too go about doing it
User avatar
JimHelms
Site Admin
Posts: 1361
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 192 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by JimHelms »

Did you look at this TUTORIAL?
steveg
Posts: 28
Joined: Thu Feb 27, 2020 12:27 pm
Has thanked: 3 times
Been thanked: 7 times

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by steveg »

Any plans to release a WiFix version of the new GoldenOrb?

EDIT 9 March: See they are now available. Thanks!
Dazed-and-Confused
Posts: 29
Joined: Fri Jun 05, 2020 5:02 am
Location: England
Has thanked: 4 times
Been thanked: 4 times

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by Dazed-and-Confused »

Is there going to be a WiFix version of the ROOTer firmware available for the Q (Qualcomm) version of the WE826 router. Though I notice your site is stocking what seems to be another variant of the Q based router. I assume they would use the same compatible firmware? I prefer WiFix over the ROOTer variant.
jimmygunz
Posts: 1
Joined: Wed Jul 29, 2020 2:38 pm
Has thanked: 0
Been thanked: 0

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by jimmygunz »

Hello all, I just got a Wiflyer 4g LTE router which uses the WE3926 chipset and has OpenWRT. Trying to find a firmware that is supported with TTL settings. I tried downloading the suggested Golden Orb Wifix firmware and uploaded the firmware to the router but got an error message saying that the firmware was for the wrong model. Any ideas?
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by Didneywhorl »

Not familiar with the 3926. Where did you get it?
User avatar
BillA
Posts: 1137
Joined: Sun Dec 01, 2019 6:46 pm
Location: USA
Has thanked: 204 times
Been thanked: 317 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by BillA »

jimmygunz wrote: Wed Jul 29, 2020 2:42 pm Hello all, I just got a Wiflyer 4g LTE router which uses the WE3926 chipset and has OpenWRT. Trying to find a firmware that is supported with TTL settings. I tried downloading the suggested Golden Orb Wifix firmware and uploaded the firmware to the router but got an error message saying that the firmware was for the wrong model. Any ideas?

The WE3926 is a budget version of the WE826 in a plastic box, and the it's compatible with the WE826/WE1026 firmware according to the GoldenOrb website (ZBT WE826/WE1026/WE3926).
Here's the latest version dated 2020-07-25:
https://www.ofmodemsandmen.com/upload/w ... -07-25.zip
Try to flash it using the bootloader method:
https://wirelessjoint.com/viewtopic.php?p=6007#p6007
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by Didneywhorl »

BillA wrote: Tue Aug 04, 2020 8:38 pm The WE3926 is a budget version of the WE826 in a plastic box...

LOL! Isn't the 826 a budget router already?
User avatar
BillA
Posts: 1137
Joined: Sun Dec 01, 2019 6:46 pm
Location: USA
Has thanked: 204 times
Been thanked: 317 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by BillA »

Didneywhorl wrote: Wed Aug 05, 2020 12:42 am LOL! Isn't the 826 a budget router already?

No, that's called the "cheese box"! lmao
The WE3926 is even cheesier.
usav3t
Posts: 11
Joined: Sat Feb 22, 2020 4:31 pm
Has thanked: 1 time
Been thanked: 4 times

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by usav3t »

is wifix-we826go ok to use on a kuwfi branded t-2?
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by Didneywhorl »

I think so. But you'll have to use the firmware recovery method, search on this forum for it, to load it.
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by Didneywhorl »

Latest WiFix Versions available
tDk2000
Posts: 1
Joined: Sun Feb 28, 2021 2:31 am
Has thanked: 0
Been thanked: 0

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by tDk2000 »

Didneywhorl wrote: Thu Feb 04, 2021 2:33 pm Latest WiFix Versions available
Installed succesfully on WE826, but can't install additional kernel-dependent software. For example i need pptp vpn support and then there must be pptp kernel module to be installed inside. When i tries to install module via "software" menu i get foolowing error:
Installing kmod-pptp (4.14.167-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.7/targets/ramips/mt7620/packages/kmod-pptp_4.14.167-1_mipsel_24kc.ipk
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-pptp:
* kernel (= 4.14.167-1-eb0249176c60bd37f771ab7e564db34d)
* opkg_install_cmd: Cannot install package kmod-pptp.
How it can be fixed?
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by Didneywhorl »

post here for firmware specific issues like this: https://forums.whirlpool.net.au/thread/ ... =-1#bottom

I believe it has to do with the kernel of the router is not the same that is needed for support of that package. It is a frustrating thing sometimes. Ask there, there is another version that is available that it may work with. Most of the latest packages work best with openWRT base 19+ and the WE826 based firmwares are all openWRT 18+.... except one experimental version.
perrylic
Posts: 2
Joined: Wed Mar 10, 2021 8:21 am
Has thanked: 0
Been thanked: 0

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by perrylic »

My newly purchased RV had a Lippert Component roof mount preinstalled for their One Control Hotspot (WE826-T) which I bought. Then I find out that the 3rd party provider of data plans had terrible plan pricing. But since they won't allow a return and refund, I'm looking at reloading generic firmware that will allow me to use the AT&T unlimited plans. Is this possible and does anyone know which FW rev will work?
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by Didneywhorl »

This will be your best bet for the WE826-T: https://www.ofmodemsandmen.com/download ... -03-01.zip
johnj27
Posts: 1
Joined: Tue Apr 06, 2021 4:28 pm
Has thanked: 0
Been thanked: 0

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by johnj27 »

When you uncheck the save settings, do you lose all your configurations (i.e. have to resetup APN, TTL, static IPs, etc.)? Can you backup the settings, then upgrade firmware, and then restore the backed up settings or does the backup not cross firmware versions?
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by Didneywhorl »

It does make you lose those settings. I generally will not use a saved config, but yes you can do so. It's in the same menu as the firmware flash. You can use configs across different firmware versions, technically.
jvarnedore
Posts: 5
Joined: Mon Sep 03, 2018 7:33 pm
Has thanked: 0
Been thanked: 0

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by jvarnedore »

I need to upgrade my we826-t firmware purchased from LTEFix. Looking in the google drive I only see we826GO. Is this the one to use and if not what? Thanks
User avatar
Didneywhorl
Posts: 3609
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1359 times
Been thanked: 754 times
Contact:

Re: WiFiX Firmware for WE826 | WG3526 | WE3926 | WE1326 | WE1026-5G | WE3526

Post by Didneywhorl »

jvarnedore wrote: Thu Jan 13, 2022 9:47 am I need to upgrade my we826-t firmware purchased from LTEFix. Looking in the google drive I only see we826GO. Is this the one to use and if not what? Thanks
You have WiFiX branded firmware on your T2 router or does it say Rooter or Goldenorb at the top of the WebUI pages?
Post Reply

Return to “Firmware”