Wireless Joint

The Inseego 5G Wavemaker FG2000 ONLY supports bands B42, B48, and n78 for use with external antenna If those are bands you need then use the external ports as they are. As you can read, others are trying to re-route those external TS9 antenna port wires to different bands from the inside of the dev...

TTL = time to live, it is how the carriers see end users sharing data from their devices. the test point on this one only renders emergency mode (9008) and since there is no known loader for SDX55 yet it is useless. I enabled the comports on this one by modifying firmware and loading it to the devic...

what do you mean by "TTL contacts" ? time to live is a sub program that lives in the iptables module in your devices kernel

Yes I can help msg me away from here, my contact info is on my page here

I don't know the antenna hdwr configs by heart so you will just have to look, they are all right there, and simple to see where they go with labeled antenna bars, you can look thru the fcc doc to get the antenna names and what they represent.

Sure, you can get my email in my signature or just search the web I am not hard to find.

Well to find out you need to do what I said first and make sure they are both using the same bands and ca status, otherwise the difference may be simply the 2 devices are using different configs/bands

Well if you want to know you need to be sure of what you are looking at, so I would suggest checking the band and CA status of both the phone and m1 make sure they are identical otherwise you will be comparing apples to oranges if the m1 is not on the same band lock it to the same band and CA status...

What are you needing to do or for me to do?

I am getting an fx2000 sent to me by the weekend so next week I will know what it takes to get that one done and prob will be making a proper thread for it

Be careful updating these devices beyond 10.01.41.02 If you do The new update locks the device's MEP and breaks the coding for the challenge request so one cannot correctly pass the MEP or CMD challenge without downgrading back to the previous version. the OPENLOCK challenge algorithm for some reaso...

Look in the fcc docs, there is enough of a description you can know which is which.

This is the new flagship portable hotspot/router device for inseego, its a very nice device imho. I got one a few days ago and have been at it with this one since then, they made some changes from the other similar devices they boast. It has a 30 partitioned qualcomm chipped (SDX65) board with a sim...

mr1100 like most data devices is throttled and has several watchdog files to control its speed, they can't have you blazing a fast trail in the interwebs on 30 devices now, can they. Everything these days is about control, control for everything from how you can use your data to how you take a wiz. ...

There is a upgrade package they want to sell you for it that enables the phone port, second sim slot if your device has one and some other bands and features, it cost 200 bucks, and is imo a rip off, they charge peeps 1500 for these then say here pay me 200 more to make it work as it was built to......

To put it bluntly, The firmware I made for it I am not sharing, at some point I will be done using/selling it and at that point I will post it for the community to have freely, but for now, I am still making custom builds based on it and selling recovery services so I am not ready to give it away to...

about an hour to recover it, and I am less than an hour from the speedway

@Rich Hathaway I am from EU too... if massage about mail it was to me becouse you not confirm is brick? Can I do something else? It was to the people in this forum, not any one person. I just offer to help you recover your device but you would have to get it to me I cannot load it like this over ne...

I can recover it for you but you would have to mail it to me, that type of load can not be done over network, it would take a couple of days to complete it like that, even with a good fiber connection.

Read this thread

If no FDT will work then likely somehow you broke the bootchain and need a full load from emergency mode (9008)

Yes, read thru this thread, if your prob is not hardware they can be fixed.

lol
Be strong grasshopper

I have a build of the us cellular firm that I made from a working device and can rebrand it but it is not needed to change bands, I hear Verizon is getting this model and that firm will likely be much more cross-carrier friendly but your bigger challenge will be getting the ports enabled so some wor...

No, sorry, I am afraid if I bought a 3d printer I would never get anything done but play on it all day long. so I have not collected any files for printing.

oh, 3d printer file, ok I misunderstood what you were wanting.

if your device has space you can do this and control it by making a sh file to control it or I have heard there are some already made for ARM devices out there. I made one for pia and found an exploit that makes pia free and able to be used on unlimited devices, I baked it into a firmware build and ...

what do you mean "stl file from original housing" ?

Look around on the web there a few diff ones out there try one of the NAS ones

Try a diff spk

No that is not a correct loader for mr5x00
He shows in his readme file that edl was tested on mr5x00 but it is incorrect, I have ask him to remove that statement from the readme file but it remains.

AT&T does and can see time-to-live all carriers do/can, they just don't have it written into the switch to deny service when data jumps like Verizon and its mvno's do, instead, they simply flag the account and wait for a rep to take a look, then they can and will either suspend or terminate your...

I flashed 3 devices for use with sims out of the tmhi remotely in the last week, and while I did not note the ul speeds they told me they got, I can say it was much slower than any sim on the tab plan for tmobile and when I say much slower the comparison is like this. most tab plan sims after flashi...

Can I ask what model did you have and what exactly happened to it or what do you mean by "died" ?

Thats good, if you can get to fastboot then firmware can prob be made for this one.

yes there are

IMG-3433.jpg

image_123927839 (4).JPG

Well that says alot about Quectel, they are willing to offer you support if they knew it got messed up by a firehose loader, that is some good customer service right there.

Look for yourself, if you can find it there.

https://fcc.io/PY3/17200378

The Inseego 5G Wavemaker FG2000 ONLY supports bands B42, B48, and n78 for use with external antenna

Lol, is that actually what they wrote
"we doesn't tested with the PoE"
that really makes their support sound uneducated.
I am a 7th grade dropout and I doesn't even speak like that
lolololol

you mean to use fbb.home ? I think it can work with the fast one also.
If you mean the ttl, I do not have this device to check it but since it is a device meant to share data
I would think ttl would not matter so any value would prob work.

fast.t-mobile.com for apn and 65 for ttl

Try ttl of 66 it should work

yes and the government tells you that a hammer cost 500 bucks when they buy one, Don't believe everything you hear. if you have the Qualcomm variant of the fg2000 this will work on it, if you have the IPQ one don't load it, if you do and it does load you can/will have probs. I have not seen the IPQ-...

Set your apn then it will search for your network by mcc/mnc read from the sim card.

check the apn

yes please contact me by email or my skype
live:kcphonestores_1
kcphonestores@gmail.com

That device will require you to take it apart to enable the ports so work can be done on it.

Its not that I am not wanting to help you but it is far to much to just type out.

I had to make mine, there is no public file or leak for it from netgear or sierra, so you would likely have to make one if you want it.

The EU factory .spk file is 106,844 KB and a full firmware for it is 577,056 KB

It is all over the web, google for it.

FDT is an executable that is called up by the command line, I am not sure what sdk you are trying to use but all you need to use it is a command prompt. you can call it up and see its usage by fdt -h To make a backup you cannot use fdt to make it or to load it to another device, you would need a wor...

Why don't you demsg it so you can see what is going on with it?

I can report that the fg2000 can run with the fw2000 firmware on it, I did not run it for very long with fw on it but it ran ok for 20 minutes or so before I loaded fg2000 firmware back onto it. de-throttle is only partially working, my stock device on tmobile was only running about 22 Mbps down and...

I think you mean spk, if you do they are on the web if you look they are not hard to find. to answer your other question there are no AT&T spk's released or leaked, the only way to get AT&T on your device is to pull the AT&T firmware from a working device and make it reloadable then you ...

Threads are not the place to solicit services, the powers that be do like that.
Use the marketplace section of the forum
viewtopic.php?t=2696

You can msg me later in the week away from this thread as it is not the proper place for solicitations.
use my thread in the marketplace here---> viewtopic.php?t=2696
or my contact info is not hard to find

I am not aware of any downloads for it, you never know though, there are prob only a few people that have been able to make firmware like this, netgear never released any or had any leaked that I am aware of and the people that are able to make it dont post it for public, they tend to like to sell s...

I have about a dozen testers now running it so I am good with beta testers now.
I can do the mod on your device later in the week I am tied up for a couple of days on a commercial job on devices arriving to me today.

Hold power while you are plugging it in and keep holding power until your pc dings, about 5 seconds, you will need a patched loader and firmware other than a .spk Send the loader then erase your device back to 0 then it can be loaded with this type of image (byte by byte) when finished your device w...

In this case it needs to be re-loaded from emergency (9008) mode, this will recover it.

Yes it can be done thru firmware, only because for now, it needs firmware loaded to it to enable the ports otherwise it can just be done thru the command line.

They have hardware differences so not advisable, besides, where would you get the firmware? I do not have it and have not made any for it as I don't have this device yet. All the work I have done on it has been done remotely by pulling its comports over to my pc from a friend that has one. But to ma...

Yes when you do what you just said you can send AT commands from there, use port 5510

Carriers of branded devices have that info in their database, meaning if it is a Verizon device then Verizon has all the info from that device if it is a sprint device then likely Verizon does not have it. There are rumors of carriers sharing some database info with competitor carriers in a sort of ...

here is a stock config from it, not convinced it will do what you want it to but here it is.

config.tar.gz

If you take this file please don't forget to hit thank you

Unlocking is working now on this one.

This is in its infancy, a very beta at best, and not properly tested yet. Having said that I do need a few beta testers for it to help diversify testing some, so testing is not limited to mine and a few other devices. Right now I am not even sure how many different nands have been used in the produc...

no, comports are usbendpoints that allow interaction with certian parts of the device, those wwan fields that are greyed out have nothing to do with them.

Yes you can load the backup from another device to it, it will take it.

IMEI, MEID, ESN, and FID repairs working now
TTL repair working
I have compiled a working system and modem firmware now.
working to make the other partitions now.

Version: chimay-insg-1.0

Screenshot from 2023-01-11 12-17-49.png

ubi info for system and the modem UBI version: 1 Count of UBI devices: 2 UBI control device major/minor: 10:54 Present UBI devices: ubi0, ubi1 ubi0 Volumes count: 1 Logical eraseblock size: 253952 bytes, 248.0 KiB Total amount of logical eraseblocks: 1096 (278331392 bytes, 265.4 MiB) Amount of avail...

This is some info for FG2000 FX2000 may be the same method to get at the comports? I do not have one of those yet to try on. I am working on this device, is anyone else? some info for it I have the comports enabled now Hardware id's are as follows 900E USB\VID_05C6&PID_900E&REV_0000 USB\VID_...

No, it will prob be somewhat faster than the wifi.

Search found 551 matches