Wireless Joint

Still struggling with Visible. Will get it going for a bit and within a few minutes it shut down. Restart and it connects for a little bit then shuts down. Seeing this in multiple units now. Is anyone else seeing this out there?

Hello all,

I currently have this plan. Trying to get it for my uncle. Keep being told that it doesn't exist that there is no such thing as a tablet plan for $20 standalone that is unlimited.
Don't think this is correct?
Anyone out there get one of these recently?

Well thought read that you don't have any hotspot data with your plan? So if you are able to stream via phone tether you must be doing something to make that happen that they don't detect?

OK,
Heard stories on here before where people had one named differently.

So you are able to get unlimited hot spot thru a VPN use only?
Without using TTL settings?

gscheb wrote: ↑Wed Jul 06, 2022 7:57 am Try this below

#start TTL rules
iptables -t mangle -I POSTROUTING -o usb0 -j TTL --ttl-set 65
ip6tables -t mangle -I POSTROUTING -o usb0 -j HL --hl-set 65
# End-IP4-TTL-Fix

Make sure the -o usb0 part is correct. Could be called something else

Try this below

#start TTL rules
iptables -t mangle -I POSTROUTING -o usb0 -j TTL --ttl-set 65
ip6tables -t mangle -I POSTROUTING -o usb0 -j HL --hl-set 65
# End-IP4-TTL-Fix

Visible has now been connected all day in a netgear LB1120. Still don't think there is an issue with my WE826/EM12 though.
Is visible fighting back?

Just Sending a message to see if there is anyone that might have got shut down? Thinking of setting this up for someone on the post pay AT&T tablet plan. Thanks

Had this thing set up to do a auto reboot at 4:30 AM and it did that just fine. But did notice that was stuck on the 5 up and down speeds again. So decided to power cycle it and bam won't connect anymore. Don't think this is an issue with the device. Tested other sim cards in it and it connected. Th...

Well ended uploading fresh firmware to the router and doing the visible set up from scratch. After that it works just fine. Don't understand what is going on with it. Why need to do this? If the AT&T post pay tablet plan continues to work may switch them to that. Less maintenance to keep it goin...

Now put this into a NetGear LB1120 and it will connect in there. So put it back into the WE826/EM12 and still won't connect. Checked the debug information doesn't show any errors in there.
Might just reload everything from scratch again and see what happens I guess.

Doesn't seem to be the "PDP Contexts" this time. They didn't change it just doesn't want to connect for some reason. Going to try it in another device and see what happens. Has anyone heard of Visible starting to block devices?

Have two of these running with Net-gear LBR20 still going.

Hello all,
Haven't heard anyone update lately of what Antenna set ups they are using with T-Mobile home internet.
Anyone have any new ideas on setups?

Hello all,
Haven't heard anyone update lately of what Antenna set ups they are using with T-Mobile home internet.
Anyone have any new ideas on setups?

Hello again,
Uncle contacted me today saying his visible is out. Been little over 4 months since I fixed it last time. Guessing might be the same issue again. Haven't looked at it yet. Will let you know.
Is there anyone else out there having issues with Visible right now?

viewtopic.php?t=2367

The bands would still apply to the situation.

Hello,

If you are talking about T-Mobile phone sim you just need a apn and TTL set.

APN=fast.t-mobile.com
TTL= 64

The bands the MC7455 can get are 2, 4 and 12 on T-Mobile.

Don't have any experience with 5G phones so don't know. Have carried a gl.inet travel router on vacation before.

Would consider tethering it to a router. Been doing it that way for years.

I am also on verizon in a very fringe area. No chance for coverage from anyone BUT verizon actually. The deprioritization issue is on the verizon side and I know no way around it other then getting a different plan with more "high speed" data. Now as far as the basics on what to do.... In...

Hello,
Check out att&t coverage. At&t post pay tablet works great for gaming.

Can you please explain what you are trying to do?
My father wanted wifi in his barn. Used a mesh system and put the satellite in the barn window and that worked fine for example.

Hello,
Don't know how long it will last but still using post pay at&t tablet plan. With no issues. Been using this probably a year now. Also not using one of the white list modem and modem isn't altered an any way.

Hello think this is a relatable post viewtopic.php?t=3448

Hello,
Sounds like a DNS issue.

Now personally never changed identity on Visible setups. Never changed identity on anything.

Look into US Mobile. Most any non-hotspot plan will require identity changes. Currently have us mobile for my personal cell phone use. They are a great company. Highly recommend them for discount cell phone use. However when it comes to data caps on Verizon it is a hard cap at 75gigs. After that th...

Hopefully someone can write in with some real experience with this. Have only used Visible myself. Know that Verizon can be harder to do. Heard people on here using Verizon prepaid phone service, Verizon tablet plans and Reseller called page plus. Here is an old post about services on different plan...

Hello,
Was wondering how much data you need per month? If you tried to see if there is a chance you are eligible for Verizon lte home internet then been promoting? Are you sure that you you can't use other provider other than Verizon? T-Mobile and AT&T can be easier to get for sure.

Also you may want to ensure your IPV6 prefix is set to blank. This was an issue in Goldenorb. This is under the Network-Interfaces menu. Sometimes its on a tab along the top, or on the interfaces page on the bottom. If those still give issues try disabling IPV6 in all ways, including your APN setti...

Try using what is in blue below.

#start TTL rules
iptables -t mangle -I POSTROUTING -o usb0 -j TTL --ttl-set 117
ip6tables -t mangle -A POSTROUTING -o usb0 -j HL --hl-set 117
#end TTL rules

Are you using this?
#start TTL rules
iptables -t mangle -I POSTROUTING -o usb0 -j TTL --ttl-set 117
iptables -t mangle -I PREROUTING -i usb0 -j TTL --ttl-set 117
ip6tables -t mangle -A POSTROUTING -o usb0 -j HL --hl-set 117
ip6tables -t mangle -I PREROUTING -i usb0 -j HL --hl-set 117
#end TTL rules

Josephur wrote: ↑Sun Mar 06, 2022 12:15 am Are you only using 3 of the antenna connectors?

No using four antenna ports. The lower antenna on the grid is a mimo antenna with two wires coming off of it. So it is a total of 4 wires to 4 ports on the modem.

Hello, So what data plan is this? Is this T-Mobile home internet or this a phone plan data? What are you connection stats? I have the T-Mobile home internet and using the Nokia trash can modem and connecting to band 2 & N71. This is my stats Band 2 on top Band N71 on Bottom T-mobile Stats.PNG Th...

So the issue with visible is allot of people get stuck on the 5 up and down with LTE routers. If you can get a different plan other that Visible that doesn't have that issue and put an outdoor antenna that would get you better speeds. Is there a chance you could get AT&T or T-Mobile signal there...

If you max really will be 20Mbps Category 4 will be all needed.
Think you could find a better data plan. What plan is this?

If you are getting locked to 5 up and down, you are getting picked up as hotspot data. That is the terms of the phone plan 5 up and down.

Have you looked at what band you are on when you have no upload speed?

My tablet is on the white list. The router I am using is not on the whitelist. Didn't change anything just moved the sim from tablet to router. Will let everyone know whether it makes it past the February 22nd. Mine is still on this morning. Wonder if 3G really did go down? Know in the past with ot...

USMOBILE has Verizon and T-Mobile coverage plans.
https://www.usmobile.com/plans

Hello all, Have had my uncle set up on this and has had no issues for like a year now or more. He called yesterday and said it was out. Went over there today Immediately put the sim into a phone and got a connection. So next looked at the setting and etc. Noticed that the "PDP Contexts" ha...

Ok good.
Always had carrier aggregation with that firmware

See if you can do something with zip file.

EM12GPAR01A20M4G_01.001.01.001.zip

Might have it on a drive. What is file name that you are looking for? Or what extension. Been awhile since I have needed to do this.

viewtopic.php?t=1225

Guess you could take it in your car and go close to the tower and see what happens. Continues to ask crazy when close to it you know something else is up.

Screenshot_20200423-013113.png Hello, With the antenna inside could just be having extreme signal changes. When the SINR is very bad your performance will be bad. For now would pay attention to that signal. Could you rig the antenna outside a window. Or maybe band lock to lower frequency bands that...

I have read where several people had issues when switching to an approved phone but using their old sim after a few days they could not connect. Those of you that run spoofed IMEI devices may need to do what gscheb did. Though whether his continues to work past the 22nd will be interesting. The tab...

Last week my post pay at&t turned off. Put the sim into the Tablet and still wouldn't connect. Called at&t and they said it was a sim card issue. Mailed out a new one. After getting it activated in the tablet put it back in router and back up and running again. Just encase this happens to an...

Here is an post of mine where had issues like you are having. Accidentally found out that it was one tree causing the issue.
viewtopic.php?p=4589#p4589

Have you tried at another location? Its on my roof. I have rotated the antenna and tried pointing on other cell towers. There is a forest between me the antennas. Would a panel antenna be better? https://thewirelesshaven.com/shop/antennas/outdoor/outdoor-cellular/high-beam-x2-bundle/?bundle_quantit...

Have you tried at another location?

Thanks for the chart. This is still terribly new to me. The cables are 10ft LMR200 Low Loss Duplex Coax (Dual) Cables from LTE Fix store. The Pi is in outside under eve of the roof in a waterproof electrical box of course using those cables. Everything is well taped for waterproofing being that I l...

Hello, Well you are on Band 12 which is the slowest T-Mobile band and have a bad connection as well. Tell us more about the 2 Wilson Electronics Wideband Directional Antennas and the cables used to hook them up? Are the cables and antennas 50 ohm? If not that could really mess things up. Here is som...

If you have rooter can look in
- Modem
- Network Status

Modem Pic.PNG

Do you know how to see what modem is in there? Should show in rooter what is in there.

Well need to know what modem is inside of it. That is more of a determining performance of the system.

Hello,
Can you tell us what router and modem you are using? To know what we would be comparing it too.

Hello All,
Guess they are moving forward with this shutdown soon?
Still waiting to see if this is going to put the kibosh on my AT&T post paid tablet set up.

Look thru this and see if you did all of this.
viewtopic.php?p=18630#p18630

Hello,
Your ok just got the wrong address. Use 192.168.1.1

Had the router working with visible, to the best extent possible, but still wasn't great. I've been trying the last couple days to get it working on my total wireless plan with no luck, However I don't have much experience, and I really don't want to brick the modem. I have reset the router firmwar...

Hi Guys, I'm new, very new. I can't answer the question. I would like to ask one. I have a Quectel-ep 12 modem with NEXQ6GO-M installed. I live in Rural area about 8 miles from tower. I have TMobile. I wanted to take my Sim from my phone and see if it will work for internet access. I don't know how...

hydrocynus wrote: ↑Thu Jan 27, 2022 3:18 pm Thanks. Is it possible to flash the Glinet router I have with WifiX Rooter?

Yes I believe it is but not necessary to use the custom rules. Also the custom rules above is for a tethered phone. If was using a modem it would be different.

I still do not get it. Do I need to delete all the rules in the custom rules (OpenWRT, LUCI) and then paste the TTL and HL script in there, save, restart the firewall and the router and phone then test if that works? Or, do I need to append the script to the one already existing and then save, rest...

How do I turn custom TTL setting off on a GliNet router (I used GL-AR150). Thanks! The custom TTL is a setting in rooter not in the GliNet firmware. You can follow these instructions to verify you setting it in the right place in GliNet firmware. https://wirelessjoint.com/viewtopic.php?p=15672#p15672

One time also had it working with a VPN proxy. So like you turn the Hotspot on the phone and share the VPN thru the wifi Hotspot. Some setti gs under proxy on the wifi settings. Been awhile since done that.

Wow! Thanks for updating everyone on this.

hydrocynus wrote: ↑Mon Jan 24, 2022 11:56 am If you look at another thread I started, the TTL trick does not work for me. Looks like visible has caught up upon this during their last update prior to Xmas

Just want to make sure I am being clear. Was using that TTL and the VPN at the same time.

Best set up I have used with Visible so far is a Quectel EM12. Usually use it in a WE826 router. The lan ports on WE826 are capped at 100 Mbps. But that not an issue for me. Just worth mentioning. Mofi not going to perform like the EM12, EM12 is better. The MR1100 lacks the ability to set the TTL s...

viewtopic.php?f=32&t=1703&p=18630#p18630

Been allot of reports of people being mobile with this unit and it still works. People order it for one address and use it at another on a different tower. Seen other claims people using it in RV's driving place to place. So it suppose to be nailed down but not currently being enforced.

Try to see if using a VPN helps and check back in to the forum.

Cloudflare is safe and free if you don't have one.

Search found 1595 matches