Wireless Joint

My info as of 1824 hrs today Signal Information Network : FDD LTE CSQ : 21 Signal Strength : 67% RSSI : -71 dBm ECIO : -17 (RSRQ) dB RSCP : -107 (RSRP) dBm Connection Monitoring Status : Disabled Cell Information MCC MNC : 313 100 RNC/eNB ID : 9EC08 (650248) LAC/TAC : 1247 (4679) Cell ID : 0F (15) L...

I know I have 4 16dbi directional antennas hooked up

Ok I'm gonna look into it and thanks for all the help you and didneywhorl provided me. Y'all helped me all the way thru

How can I make this chose a different band?

ATI
Quectel
EM20
Revision: EM20GRAR01A06M4G

OK

Here is what it's showing now Modem : Quectel EM20 Modem #1 Modem ID : 2c7c : 0620 Provider : FirstNet Comm Port : /dev/ttyUSB2 Temperature : - Protocol :MBIM WiFiX WG3526 Signal/Cell Information Current Connection General Information Modem : Quectel EM20 Modem #1 Modem ID : 2c7c : 0620 Provider : F...

Ok downgraded modem like was said to. reinstalled wifix twice entered apn restarted and inserted sim working like a charm no issues thanks!

Ok thanks I will do it later today when I have a little time as I'm busy watching after a newborn and trying to clean my pool

So it's better to run the modem off of the USB adapter on the modem than it is to connect directly to the modem using an m.2 adapter? Also is there any configuration I have to go into settings or is the router going to find the modem automatically once I plug it into the router and power it on?

What adapter is this I have one haven't used it though I had ordered off of eBay as I did not now this place existed until I googled for em20 issues lol

Ok will do it tomorrow as for now it's bed time gotta be up early tomorrow as my kids wake up at the crack of dawn

Yes I do

When I have the bad connection will tell me
All my info what band I'm connected to usually band 17 10 mhz

Just logged into the router this is all it shows me when I have good internet
Modem :
Quectel EM20-G
Modem 1
Modem ID :
2c7c : 0620

Provider :
Connecting

Comm Port :
/dev/ttyUSB2
Temperature :
-

Protocol :
-

Question with m.2 adapter I'm limited to 400 mps is there a router where u can plug that modem directly into?

So far so good still no issues thanks

The one on the 3526

I went into wwan0 and put it in mbimode entered my apn and that's what got me connected to the internet if I put wwan0 into unmanaged I lose the internet

Last night after several days of trying everything turned out it was the new little cables inside but my modem were faulty.modem shows up still as connecting if I put an at command then it will go and show everything put then I'm limited at what websites I can go into. For example lets me see news s...

Atnt

Thanks this is what I got
ATI
Quectel
EM20
Revision: EM20GRUR01A08M4G

OK

Also I'm using a m.2 adapter

I'm having the same issue got a wg3526 with wifix and modem gets stuck at connecting

Like the title says I need help getting the modem to work on a wg3526 I got it all set up installed we fix and gets stuck on connecting or it doesn't find the modem. If someone can point me in the right direction as to what to and how to install I'd appreciate it. Thanks in advance