Wireless Joint

This is some info for FG2000 FX2000 may be the same method to get at the comports? I do not have one of those yet to try on. I am working on this device, is anyone else? some info for it I have the comports enabled now Hardware id's are as follows 900E USB\VID_05C6&PID_900E&REV_0000 USB\VID_...

No, it will prob be somewhat faster than the wifi.

opencommand and setcommand

This is not the proper place to solicit services, see link below.

viewtopic.php?t=2696

Yes mine is on the 10$ biz tab plan on tmo. It needs flashed and dethrottled to work and to have speed like this

@matteolo These sierra devices have control files for everything, they have control files for the control files. for CA, it has a list of approved carriers by PLMN ca.PNG This is from M5 but M6 has similar tables, I do not have firmware for m6 on this pc I am on now to show you them. These devices h...

HI if you are going to buy a M5 for use on tmobile, I would suggest to buy a M2000 instead, they are much cheaper and will run much faster on tmobile, see mine in the pic below.

"https://i.ibb.co/HCjNMQR/speedtest2.jpg"

Ok I will look for your mail

So it appears the newer firmware build has the apn editing blocking the way I was writing the apn to it so now made a new way to do it that seems to be ok now, it is only a soft code method, I will have to work on hard coding it when I have some more time apn set.PNG The only drawback I see so far i...

I have not had that one yet, sooner or later someone will send me one to play with, are you able to find fastboot mode on it?

So the FW2000 and the FW2000e are definitely different beasts. As you can see below the firmwares are very different. Look at the FW2000 26 partitioned firmware. dev: size erasesize name mtd0: 00280000 00040000 "sbl" mtd1: 00280000 00040000 "mibib" mtd2: 01500000 00040000 "e...

Yes I can hard code everything for the M1 no problem.

I answered your pm, but yes I can write any apn to it.

Just execute it is all, it is just a single command that sends thru the adb port so it has to be enabled for the tool to run.

No, I have not had that one here yet, but I am sure someone will send me one.

I have done some work on it already.
I am waiting on another device to arrive here, the one I have now is shorted out board.

These threads in the open forum are not sales threads they are for dialogue, information and such.
I have an advert in the marketplace for services there is the link below

viewtopic.php?t=2696

I suspect that the Netgear MR1100 may have some sort of DoS attack hitting it, but without a log file, it's only an idea. Your M1 does not have any denial of service attacking it. All devices have logs. This one is an android based linux device, meaning you can dmesg it and see exactly what has bee...

The FG cannot be done yet, I have one here and have been working on it some but for right now it is not able to be done.
Need to start a FG thread here, I see when I made this thread I typo'd and labeled it fg2000 it should have been FW, I will change it.

I have firmware for it, I did not make it, a friend put it together and I was asked by them not to make it public, custom firmware for this one will be difficult until an sdx55 loader can be patched successfully or the broken boot chain can be repaired that is caused by loading a binary file.

If you mean a byte by byte load it is extremely reliable if the person loading it knows what they are doing, there are some variables to deal with such as bad blocks and markers in the input file and such but if done correctly it is almost 100% success rate. fdt not so much, there are a few keys tha...

Yes if you have an spk file for it, it basically works the same way with the fdt tool.

Yes if you have firmware for it in the proper form

Do the factory reset and see if that changes it although I don't think those WebUI images are backed up but not for sure without looking, Its been a while since I fooled with an m1.
But those generic builds do not have ATT branding

your screen should be purple after loading the generic build and not blue anymore, sounds to me like it did not load or maybe got sent by fdt but did not unpack and install properly, or maybe did not pass the integrity check.

Try to disable IPV6 and see if that doesn't speed up your ul speeds a bit.

Try the M5 by itself and not hiding behind the mesh you have in place and see if it still does it if it doesn't then you know to look at whats in front of the m5, if it does then you know to look at the M5 and or the service, it would be super easy to write a script that would reboot it every so oft...

No that type of load does not use FDT, it uses a patched loader instead that would look something like ENPRG9x55.mbn &/or NPRG9x55.mbn the E for emergency (9008), the N for normal or dl mode(900E), or similar, it is a binary file sent to the device that handshakes it and tells it to get ready to...

facimilies wrote: ↑Fri Oct 14, 2022 6:32 pm
also as for the image its the stock image from Netgear

They made more than one image

That spk you have for it cannot be used in a byte by byte type of load. why dont you try to look around for a different spk for it, there are some out there on the web, you can use the AUS or NAS on it also.

For anyone reading this, do not try to load firmware to a working device and by working device I mean a device that boots up and especially one that has service, if you have an issue like @facimilies you do not need to try to reload your device or you will likely be here with the same issue. Issues ...

@Didneywhorl
The forum needs an inseego section in the router part of the forum

They have this thing dumbed down to max streaming rate of 720p as you can see here streaming.PNG so got that patched, now this the video speed rate now fast.jpg below is some info about it such as partition names and such 1.PNG and hardware id's so you can know what drivers to use/load for each MODE...

I just got one of these a few days ago and have been at it for a few days now. This thing is a beast! Here are some facts about it taken from the official datasheet which I will attach for reference. Network Connectivity* • 5G sub-6 GHz • 4G LTE Cat 22 • 4x4 MIMO sub-6 GHz • 256 QAM sub-6 GHz Bands ...

It can mean alot of things depending on what device you are refering it to.
in this case it is the diagnostic monitor port, the one you use to send "DM" commands to.
in other devices it can mean digital media port or download mode port or any of several other tags.

Why have both plugged in at one time? VSP=Virtual Serial Port which is for the DM port 192.168.1.1:5510 unless you have changed it but you cannot connect to both at one time unless you have enabled the real (physical)ports on them if you have the real ports enabled the hdwr id is as follows for the ...

Rich Hathaway wrote: ↑Sun Sep 25, 2022 9:26 am check that the Remote NDIS driver is getting loaded if it's not that's why you can't connect.

If that thing boots up you don't need to restore it if the ports were working before you reset it, and they are not working now after a hard reset, I would reset it again, hard reset only disables the hard ports but not the static 5510 RNDIS port, so if it's not working reset it again and try it aft...

FID= Factory ID

You should send your response back to it as soon as you get it and try not to wait, if you wait to return it to the device then just recalc the challenge first again and discard the first (the old) one. you generated it correctly. those 2 commands generate the same response but you still need to ret...

Just do the factory reset (unless you have something on it you don't want to lose) then you should have access with putty again, as for your errors in the challenge and response Not enough info for someone to help you figure this out. run one again and post the challenge, command you used and your c...

No I do not need the RNDIS port

No TeamViewer for me, and you can just disable the Remote NDIS for the USB stick and then your internet can work with it plugged in

I will offer to anydesk into your pc and show you, it will take about a minute and a half to do, you can even record it if you want to and post it back here for others that may have the same problem. The only other thing I can think of you can try is to use one of the driver updater programs but the...

Why dont you just unplug it when you need other web, these devices are desinged to have their RNDIS ports take priority when inserted. there were no drivers for this model other than the gps driver which does no good so we have to use drivers from other models is why they behave like this. I modifie...

No as long as you are not using a virtual machine and you are using the same windows as your screenshot with the same device plugged into the same port it should all be the same

Look in your screenshot you posted (other devices) tab with the ? next to it that is the one you are after

I thought you were looking for the ADB port?
If you are looking for the ADB port do what I said above and check the hdwr-id for that usb800 in the others tab if it is MI_04
then it is the adb pport then you know all you need to do is force the driver and the port will be working again.

right click it and select uninstall then right click anything else in there and select scan for hardware changes and see if it will reload the driver for you, if it doesnt you just need to force the driver, windows machines are like this, especially 10 and most especially 11 <-------horrible OS for ...

That is prob it there in the other devices tab (usb800)
look at the hardware id, if it is

USB\VID_1410&PID_B023&REV_0318&MI_04
USB\VID_1410&PID_B023&MI_04

than that is it and that means you just need to load a driver for it.

Check your device manager to see if the ADB device is present there, it likely is. ADB gets "left on" so to speak by a lot of programs and in this case you need to run the command adb kill-server or just force stop the ADB process in your task manager then if present it will be recognized ...

IP Pass-through = offloading and tethering = it tethers via a physical cable to share its data with another device.

You can use the below command to set N66 only for slot 5
I don't think your mr5100 can see N60
AT!BAND=05,"5G_N66",0,0,0,0000000000000002,0,0

You don't have to have all the 0 in front of the 2 but it will load either way.
This is likely the same cmd dc is running

That AT&T device can see N66 but I don think it can see any N60 band is prob why the error, are you in the USA. are you sure you have N66 available in your location? If you are sure, You may also need to go into the admin page to settings then to advanced then network (the page where the apn is)...

I have 20 sim cards with new Verizon accounts on them prepaid $55 plan, they are 2 days old today, I will give the pins with them so you can change it and take ownership of the accounts. If anyone needs them please get ahold of me, my contact info is in my sig and on my profile page make an offer if...

Did you not read the above post?
If you are not willing to do a little searching and learning I would suggest you hire someone to do it for you because like I said there is no public firmware out there to recover this device if you bork it.

Perhaps it is an e-sim device then

I am not familiar with this device, I have not had or worked on it before yet, do you have it apart yet? They usually have a USB port hiding inside as well as a sim card, it's a drag you have to take some of these apart just to get to all that, but to make it look like a phone at a minimum you need ...

thank you for the info Rich Hathaway would swicwe work in converting Netgear Nighthawk Mobile router firmwares from CWE to SPK? and would it be safe to use this converted file to do manual updates? You would have to just try it, but tell me why would you wish to do that there is no need, I mean if ...

You need to make it look like a phone to them then you can get faster speeds.

spk files are a combined nvu (carrier config files)/cwe (signaling firmware) file, Sierra prefers to push spk files out because it means there is some control for peeps not to pair them incorrectly which causes bricks. If you have nvu/cwe files you can create an spk using swicwe, which is only Linux...

Why dont you just redo it ?

Its telling you what is wrong, your port is not available, if it does not have a port how can it load your device? I assume this means your pc is not loading the driver for it, or it could be the device has a damaged usb port, or maybe you are using a charge-only cable, you will have to figure this ...

FDT will automatically search the folder it is called from without the -f option, that option specifies the name of the file in case you have changed it or something, if it is not located in there you can specify the folder with -fd [folder to firmware images]. The problem is likely he does not have...

Try on windows

10 min or less watch your devices screen to see the progress

Send you a link to what? if you mean the firmware it is on the web so you don't need me to send you a link to it, do some searching of your own you will find it. Put your device in download mode and run fdt to load it. Make sure your pc loads the driver for it before you run it or it will not run/lo...

MR6400 Partitions by name mtd0: 00280000 00040000 "sbl" mtd1: 00280000 00040000 "mibib" mtd2: 01680000 00040000 "efs2" mtd3: 001c0000 00040000 "tz" mtd4: 00100000 00040000 "tz_devcfg" mtd5: 00180000 00040000 "ddr" mtd6: 00100000 00040000 &q...

If it will go into download mode by holding power with the battery out and hold it while you plug the usb cable in and keep holding power until it shows downloading on the screen, then use one of the spk's to reload it via ftd.

Was the thread I linked above the best way to disable OTA updates? [/quote] Well, it's a way, anyway you can get it done is good Can you help me rich ? I just want to band lock my M5100 but I’m totally new to this game & have no idea where to start can you please break it down for a newbie ? I'...

Rich: 2. If I tried to attempt what you mentioned above, wouldn't I need root access to be able to write those HTML files to the filesystem? Yes, you already have root via the ADB port. if you are hung up about using the ADB port, hit me up on skype and I will zero your root pass for you so u can g...

It does not matter which one you have, if it needs to be recovered and it won't take an spk, you need to load it from 9008 mode and unless you have the raw firm (not spk) you won't be able to do it, you can unpack that spk with some older sierra tools and possibly recover it this way, it would be he...

Well, you see not everyone is in your situation, there are thousands of unlocked devices out there, all I have flashed are unlocked as well as those that have had them unlocked from the carrier, and I am sure someone else has figured out to unlock them as well but for those in your situation, tmobil...

So you understand, this tool does not network unlock the device, it only unlocks the apn so where it was greyed out before you can edit it now after you run it Yes, I did not make it to network (sim) unlock it, that is a service I still charge to perform and not free yet. Just to clarify, on this d...

If your device wont take the firmware in spk form via fdt it would have to be loaded from 0 with a byte by byte type of load from emergency mode.
This is only possible if you have the proper firmware and patched loader (ENPRG9x55).

Thanks for the kind words, not sure how true they are though, lol. for one, you need to quickly send the !boothold cmd and then send !QPSTDLOAD cmd in succession and quickly or they wont work, another way you can keep fdt from aborting for whatever reason it is, in your case the 82 code is modem not...

Search found 553 matches