Ahhhh, there is only one in stock, that's why.
The one Iinked will work. Simple screw on and clip on the internal u.fl antenna connector. Maybe add some hot glue or similar non permanent adhesive to make sure it stays on.
Search found 3593 matches
- Wed Mar 08, 2023 2:41 pm
- Forum: Questions and Support
- Topic: Help needed with TheWirelessHaven store cart
- Replies: 29
- Views: 5925
- Wed Mar 08, 2023 1:17 pm
- Forum: Questions and Support
- Topic: Help needed with TheWirelessHaven store cart
- Replies: 29
- Views: 5925
Re: Help needed with TheWirelessHaven store cart
AlteredLogic This one? https://thewirelesshaven.com/shop/cables/rf-pigtail-jumper-cables/ufl-pigtails/u-fl-female-pcb-to-sma-male-adapter/ Which device are you using? I've tested on desktop, and android, and can update it just fine. :| On mobile you have to hit the "enter" key on the keyb...
- Wed Mar 08, 2023 9:53 am
- Forum: Tutorials
- Topic: TTL and HL settings and how they help when modified
- Replies: 14
- Views: 38100
Re: TTL and HL settings and how they help when modified
Tmobile Tablet SIM (insert modem direct) on 5G CPE Modem Ping 192.168.100.1 from a PC wireless connection to modem --> TTL=64 Do i need to change TTL ? to 65 ? there are no place to change HL (is there an AT+ command for it] ? Thanks in advance Looks like your already set to 65. Should be fine I'd ...
- Wed Mar 08, 2023 9:52 am
- Forum: Questions and Support
- Topic: Will one antenna work for multiple TP link routers
- Replies: 1
- Views: 2558
Re: Will one antenna work for multiple TP link routers
Nope, unfortunately. At best your modem will see TONS of signal noise from the other modems connected in parallel. At worst, you'll damage the modems by dead shorting them together. Separate antennas for each port. (Note, this may be possible with VERY expensive RF cable isolation type splitter syst...
- Mon Feb 27, 2023 2:03 pm
- Forum: Nighthawks MR1100 - MR5200 (M1...M5...)
- Topic: Netgear MR1100 att firmware to unbranded
- Replies: 84
- Views: 28357
Re: Netgear MR1100 att firmware to unbranded
No, sorry, I am afraid if I bought a 3d printer I would never get anything done but play on it all day long. so I have not collected any files for printing. Truer words have never been spoken. Mine keeps trying to whisper about the old days of when it was first unboxed, enticing me with its jezebel...
- Mon Feb 27, 2023 2:00 pm
- Forum: Sierra Wireless Modems
- Topic: MC7455 adapter
- Replies: 1
- Views: 2396
Re: MC7455 adapter
Drop us a picture of the slot
- Mon Feb 27, 2023 1:59 pm
- Forum: Sierra Wireless Modems
- Topic: EM9191 Band n25 Not Available
- Replies: 2
- Views: 3274
Re: EM9191 Band n25 Not Available
Might need to use the Tmobile one specifically: https://source.sierrawireless.com/resou ... -packages/
I don't know why you would have to, but that is for sure odd.
I'll test mine when I get a chance.
I don't know why you would have to, but that is for sure odd.
I'll test mine when I get a chance.
- Tue Feb 07, 2023 8:30 am
- Forum: Firmware
- Topic: IPQ6000 based routers.
- Replies: 3
- Views: 1954
Re: IPQ6000 based routers.
The problem is the Chinese manufacturers are choosing chips not supported by openWRT. If there is no official image for openWRT, Rooter generally wont spend time on making an image. Many of these IPQ chips have come out over the last few years, the Chinese manufacturers modify their 2015 toolchains ...
- Mon Jan 30, 2023 11:28 am
- Forum: Internet Service Providers
- Topic: Can we put PagePlus account in "holding" mode?
- Replies: 1
- Views: 1420
Re: Can we put PagePlus account in "holding" mode?
Never heard of it. You may just want to ask PP directly.
- Mon Jan 30, 2023 11:23 am
- Forum: Sierra Wireless Modems
- Topic: How to run AT command on Sierra Wireless Modems
- Replies: 2
- Views: 2093
Re: How to run AT command on Sierra Wireless Modems
Yep, Putty can do it or easier to use this tool: https://drive.google.com/file/d/1_XRHNhyOPU0eBxHWwXBlYqhN5RuVAE8l/view?usp=share_link Look at your windows device manager and find the AT Command port loaded in the USB ports or communication ports (Windows can be goofy with it) You'll want to connect...
- Sat Jan 28, 2023 8:09 am
- Forum: ZBT Routers
- Topic: RTFM IP Passthru
- Replies: 6
- Views: 3378
Re: RTFM IP Passthru
Does your modem get a public range of IPs to then use as routable IPs on your network, or are you just looking to avoid dbl NAT'ing your network?
Usually you just get one IP assigned to your modem, versus an entire x.x.x.x/24 or so.
Usually you just get one IP assigned to your modem, versus an entire x.x.x.x/24 or so.
- Fri Jan 27, 2023 12:01 pm
- Forum: Quectel Modems
- Topic: IMEI Help
- Replies: 1
- Views: 1667
Re: IMEI Help
Technically not talked here.
If you need to put an incorrect IMEI back to the number it should be, on a Quectel modem, you'll want to look up the AT command AT+EGMR
If you need to put an incorrect IMEI back to the number it should be, on a Quectel modem, you'll want to look up the AT command AT+EGMR
- Tue Jan 24, 2023 12:45 pm
- Forum: Internet Service Providers
- Topic: Visible + EC25-AF + GoldenOrb doesn't connect to LTE
- Replies: 34
- Views: 36223
Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE
Male sure to disable the auto pdp contexts. AT+QMBNCFG="AutoSel",0
Also change to MBIM protocol: AT+QCFG="USBNET",2
Reset the modem after changing: AT+CFUN=1,1
Make sure the router firewall has custom TTL & HL rules. Article on this site on how to do this.
Also change to MBIM protocol: AT+QCFG="USBNET",2
Reset the modem after changing: AT+CFUN=1,1
Make sure the router firewall has custom TTL & HL rules. Article on this site on how to do this.
- Sat Jan 21, 2023 9:23 pm
- Forum: WiFiX Routers
- Topic: Diamond Tier 5G router package
- Replies: 2
- Views: 1570
Re: Diamond Tier 5G router package
Yeah, the internal mini-pcie is USB2, whereas the USB port on the outside is USB3 (10x the max possible speed 480Mbps vs 4800Mbs)
Internal space is also too tight to fit it in there, properly.
Internal space is also too tight to fit it in there, properly.
- Thu Jan 19, 2023 4:16 pm
- Forum: General and Unclassified
- Topic: BananaPi BPI-R3, now with ROOTer support!
- Replies: 19
- Views: 9098
- Wed Jan 18, 2023 11:18 am
- Forum: Sierra Wireless Modems
- Topic: EM9191 Band Locking
- Replies: 6
- Views: 2962
Re: EM9191 Band Locking
n25 would use the same mask as b25: 0000000001000000
- Wed Jan 18, 2023 11:16 am
- Forum: Questions and Support
- Topic: T-Mobile home Internet towers 20 miles away
- Replies: 8
- Views: 5896
Re: T-Mobile home Internet towers 20 miles away
Lowest cost would be to modify the TMo router and add antennas like this one: https://thewirelesshaven.com/shop/antennas/outdoor/outdoor-cellular/mimo-directional-panel/700-3800mhz-cellular-8dbi-directional-4x4-mimo-antenna-%c2%b1-45-n-female-connectors/ or two of these: https://thewirelesshaven.co...
- Tue Jan 17, 2023 12:29 pm
- Forum: Questions and Support
- Topic: T-Mobile home Internet towers 20 miles away
- Replies: 8
- Views: 5896
Re: T-Mobile home Internet towers 20 miles away
Lowest cost would be to modify the TMo router and add antennas like this one: https://thewirelesshaven.com/shop/antennas/outdoor/outdoor-cellular/mimo-directional-panel/700-3800mhz-cellular-8dbi-directional-4x4-mimo-antenna-%c2%b1-45-n-female-connectors/ or two of these: https://thewirelesshaven.com...
- Tue Jan 17, 2023 12:22 pm
- Forum: General and Unclassified
- Topic: BananaPi BPI-R3, now with ROOTer support!
- Replies: 19
- Views: 9098
Re: BananaPi BPI-R3, now with ROOTer support!
- Sat Jan 14, 2023 2:30 pm
- Forum: WiFiX Routers
- Topic: NEXQ6GO remote access over LTE
- Replies: 5
- Views: 2179
Re: NEXQ6GO remote access over LTE
I am using ZeroTier on various devices (windows, Mac, android, LT18) with great success. According to the Rooter website ZeroTier is available for the firmware. Is it part of the firmware for the NEXq6GO or can it be added. If so, how? It takes a few steps, but... https://github.com/mwarning/zeroti...
- Sat Jan 14, 2023 2:26 pm
- Forum: Internet Service Providers
- Topic: Visible SMS and EC25-AF in a Mikrotik SXT
- Replies: 2
- Views: 1504
Re: Visible SMS and EC25-AF in a Mikrotik SXT
From what I recall Verizon uses a different SMS protocol, which isn't super default on these modems. Unfortunately I don't know the fix. Hopefully someone chimes in on it.
- Sat Jan 14, 2023 2:24 pm
- Forum: Cradlepoint Routers
- Topic: CBA850 upgrade modem to MC7411
- Replies: 3
- Views: 3144
Re: CBA850 upgrade modem to MC7411
Yeah, I believe so. I think I tested it a year ago or so. It uses all the same commands as the 7565, which also works.
- Tue Jan 10, 2023 8:54 am
- Forum: Quectel Modems
- Topic: NEXP1GO/EM20 Loosing connection while moving.
- Replies: 1
- Views: 1768
Re: NEXP1GO/EM20 Loosing connection while moving.
Rooter/openWRT doesn't really have aggressive reconnection scripts. You may want to try putting the modem in ECM mode, I think it may handle it better.. BUT if you "lose" comms with it, you'll have to put it back in QMI or MBIM via command line. Sometimes the Quectel modems act odd in ECM.
- Tue Jan 10, 2023 8:52 am
- Forum: General and Unclassified
- Topic: BananaPi BPI-R3, now with ROOTer support!
- Replies: 19
- Views: 9098
Re: BananaPi BPI-R3, now with ROOTer support!
Is the wifi6 working?
- Tue Jan 10, 2023 7:53 am
- Forum: WiFiX Routers
- Topic: NEXP1GO keeps connecton but no data throughput
- Replies: 3
- Views: 1642
Re: NEXP1GO keeps connecton but no data throughput
Change to the 10-05-2022 version. I've also noticed a few odd issues with the November version. Mostly with the wifi. The 10-05 version hasn't had any complaints that I've seen or found myself. Same for the NEXS2GO. Also, make sure you've enabled a scheduled nightly reboot, under the Services menu. ...
- Mon Jan 09, 2023 11:44 pm
- Forum: Nighthawks MR1100 - MR5200 (M1...M5...)
- Topic: MR6400 not respecting 5G band selected
- Replies: 3
- Views: 1819
Re: MR6400 not respecting 5G band selected
That is odd that it's showing you the bands, I'm guessing the Nighthawk is different than the normal Sierra 5G band locking? For the regular Sierra modems it would be: For SA n41, your command should be: AT!BAND=0D,"5G SA N41",4,0000010000000000,0 NSA would be: AT!BAND=0D,"5G SA N41&q...
- Mon Jan 09, 2023 9:13 am
- Forum: Nighthawks MR1100 - MR5200 (M1...M5...)
- Topic: MR6400 not respecting 5G band selected
- Replies: 3
- Views: 1819
Re: MR6400 not respecting 5G band selected
Just making sure, but are you setting the band mask after you define it?
The command you posted above only defines the band mask, you still have to set it with AT!BAND=02
This is assuming it took your defined mask, which you can check with AT!BAND?
The command you posted above only defines the band mask, you still have to set it with AT!BAND=02
This is assuming it took your defined mask, which you can check with AT!BAND?
- Mon Jan 09, 2023 8:58 am
- Forum: Quectel Modems
- Topic: T-Mobile Loss of Internet but Modem is saying connected
- Replies: 67
- Views: 18507
Re: T-Mobile Loss of Internet but Modem is saying connected
That's not an error. Noconn oddly doesn't really mean you're not connected. No clue why or what it means exactly but Ive seen it report that while actively downloading files. Que tels have been like that for years. Check the system logs for errors and warnings
- Mon Jan 09, 2023 8:08 am
- Forum: Market Place
- Topic: Various brand new Mikrotik Devices for Sale
- Replies: 2
- Views: 3709
- Tue Jan 03, 2023 8:52 pm
- Forum: Questions and Support
- Topic: Usb3 to m2 enclosure assembly
- Replies: 2
- Views: 2697
Re: Usb3 to m2 enclosure assembly
I just purchased this from wireless haven and have 3 questions. 1. When connecting the antennas does it matter what side I put the split lock and and the Lock washer. I assume the lock is on the outside and the split lock washer on the inside? Star washer inside, split on the outside. 2. There was ...
- Tue Jan 03, 2023 8:50 pm
- Forum: WiFiX Routers
- Topic: NEXP1GO keeps connecton but no data throughput
- Replies: 3
- Views: 1642
Re: NEXP1GO keeps connecton but no data throughput
Which router firmware version are you using and which modem firmware version (AT+QGMR)
- Tue Dec 27, 2022 7:52 pm
- Forum: Tutorials
- Topic: Orbi LBR20 How-To / Megathread
- Replies: 451
- Views: 3117407
Re: Orbi LBR20 How-To / Megathread
im trying to figure out how to band lock my lbr20 to BAND 2 can anyone help me figure out what i need to do to be able to do so? Band locking method is in this tutorial that your posting in: https://wirelessjoint.com/viewtopic.php?p=12676#p12676 The modem is a Quectel EG18, and uses the same comman...
- Mon Dec 26, 2022 8:31 pm
- Forum: Misc Modem Cards and Dongles
- Topic: Recommended USB Enclosure for ws1208v2
- Replies: 1
- Views: 1669
Re: Recommended USB Enclosure for ws1208v2
Which modem are you wanting to use in the usb adapter?
- Thu Dec 22, 2022 5:56 pm
- Forum: WiFiX Routers
- Topic: WE826GO can you expand memory?
- Replies: 1
- Views: 5435
Re: WE826GO can you expand memory?
Should be able to yes. It should read a USB drive as /mnt/sda1/ automatically when plugging in a USB drive. SD cards I haven't messed with but I would assume the same.
- Thu Dec 22, 2022 5:53 pm
- Forum: Sierra Wireless Modems
- Topic: Sierra MC7455 and Google Fi
- Replies: 1
- Views: 2024
Re: Sierra MC7455 and Google Fi
assuming you ran AT!ENTERCND="A710" first? The GSTATUS? response looks lacking in info output
- Thu Dec 22, 2022 5:52 pm
- Forum: Firmware
- Topic: WS1208v1 versus ws1208v2
- Replies: 1
- Views: 1521
Re: WS1208v1 versus ws1208v2
Should be the same, but I'm not 100% sure tbh
- Thu Dec 22, 2022 5:52 pm
- Forum: Firmware
- Topic: Cant get the Hotspot Manager to connect to a wifi hotspot
- Replies: 2
- Views: 1989
Re: Cant get the Hotspot Manager to connect to a wifi hotspot
Try using a password anyway?
- Thu Dec 22, 2022 5:49 pm
- Forum: WiFiX Routers
- Topic: NEXP1GO with EM9191
- Replies: 1
- Views: 1687
Re: NEXP1GO with EM9191
Late to the party, but yes it is different. I'm assuming you got it figured out?
- Thu Dec 22, 2022 5:48 pm
- Forum: WiFiX Routers
- Topic: NEXS2GO and RM520N on Verizon 5G phone plan, can't send or receive SMS
- Replies: 3
- Views: 1869
Re: NEXS2GO and RM520N on Verizon 5G phone plan, can't send or receive SMS
IF I recall the sms on Verizon is different than other providers. Check here: https://forums.whirlpool.net.au/thread/ ... =-1#bottom
They know the stuff with openWRT / Rooter firmware (WiFiX firmware included)
I've never messed with Verizon SMS.
They know the stuff with openWRT / Rooter firmware (WiFiX firmware included)
I've never messed with Verizon SMS.
- Fri Dec 16, 2022 3:40 pm
- Forum: Cudy
- Topic: LT18 - How to set up IPv6 VPN?
- Replies: 3
- Views: 1861
Re: LT18 - How to set up IPv6 VPN?
You'll need to use the IPV6 capable client from Mullvad. The current software for openWRT based routers doesn't support IPV6 that I've found just yet. Since Cudy doesn't let anyone update or add packages to their firmware, you would have to ask them directly for a custom firmware modification. Mullv...
- Tue Dec 13, 2022 9:16 pm
- Forum: Cudy
- Topic: LT18 - How to set up IPv6 VPN?
- Replies: 3
- Views: 1861
Re: LT18 - How to set up IPv6 VPN?
Are you sure you have an IPV6 capable VPN? I've only seen IPV4 capable VPNs.
- Sat Dec 10, 2022 8:43 am
- Forum: TTL Settings - Throttling, Tethering and Hotspot Usage
- Topic: [Guide] OpenWRT Hotspot Relay
- Replies: 3
- Views: 3157
Re: [Guide] OpenWRT Hotspot Relay
This is because openwrt moved to fw4, using nftables instead of iptables. It requires different rules for the latest openwrt. I don't have the latest rules for nftables on my phone, and they have to be comitted via command line/ssh.
- Thu Dec 08, 2022 5:21 pm
- Forum: Sierra Wireless Modems
- Topic: How to sit wan static ip
- Replies: 3
- Views: 2491
Re: How to sit wan static ip
Wwan ip is given by the isp.
I think the APN is part of the static IP thing
I think the APN is part of the static IP thing
- Thu Dec 08, 2022 4:40 pm
- Forum: Nighthawks MR1100 - MR5200 (M1...M5...)
- Topic: NetGear NightHawk M1 Inside Antenna Ports
- Replies: 39
- Views: 42078
Re: NetGear NightHawk M1 Inside Antenna Ports
The frequency range of those ports aren't in line with US supported bands. Only good for EU and AU it appears.
- Thu Dec 08, 2022 4:36 pm
- Forum: General and Unclassified
- Topic: Wifix nexr5go
- Replies: 11
- Views: 2499
Re: Wifix nexr5go
enhancedphone is a phone SIM. You'll need to make sure you change your modem imei to match the phone. Also when setting the APN in Modem->Connection profile make sure you click "Save and Apply" before leaving the page. You'll also want to turn off the auto APN features of your modem. Which...
- Mon Dec 05, 2022 9:40 am
- Forum: Sierra Wireless Modems
- Topic: How to sit wan static ip
- Replies: 3
- Views: 2491
Re: How to sit wan static ip
Same for all openWRT routers...
Menu: Network->Interfaces->WAN - edit button
Change from dhcp client to static address and set the IP to whatever you want.
Menu: Network->Interfaces->WAN - edit button
Change from dhcp client to static address and set the IP to whatever you want.
- Mon Dec 05, 2022 9:37 am
- Forum: LinkSys Routers
- Topic: Linksys EA3500 with Goldenorb MC7455 QMI Mode
- Replies: 5
- Views: 7805
Re: Goldenorb MC7455 QMI Mode
I didn't know that. Are joo chure?vigilant wrote: ↑Tue Nov 29, 2022 5:44 pmSame here, Its becasue the QMI interface does not support 464xlat networking.Didneywhorl wrote: ↑Mon Jun 21, 2021 6:08 pm I've found that QMI doesn't do well for me on Verizon nor T-mobile. I just default to MBIM for everything now.
- Mon Dec 05, 2022 9:37 am
- Forum: Misc Modem Cards and Dongles
- Topic: 5G card recommendation mini pci express + linux
- Replies: 3
- Views: 2181
Re: 5G card recommendation mini pci express + linux
It's default is PCI. Otherwise, no reason really.
- Mon Dec 05, 2022 9:36 am
- Forum: Sierra Wireless Modems
- Topic: EM9191 holding a 5g connection?
- Replies: 11
- Views: 4487
Re: EM9191 holding a 5g connection?
It's hard to say. I used to not get n41 to save my life, now I can only get it to do Stand alone n41 and not NSA n41 with the available lte bands. No hardware or settings changes. Aggravating. It's got to be how Tmobile is setting up the towers and bands.
- Mon Dec 05, 2022 9:29 am
- Forum: General and Unclassified
- Topic: Wifix nexr5go
- Replies: 11
- Views: 2499
Re: Wifix nexr5go
Which APN did you change it to? You said previously it was broadband, then you said you changed it. Did you activate the SIM with the modems IMEI, telling ATT that you were using this router with your plan, or did you activate it in something else? You said it worked before .. in this router? It sou...
- Sat Dec 03, 2022 5:32 pm
- Forum: General and Unclassified
- Topic: Wifix nexr5go
- Replies: 11
- Views: 2499
Re: Wifix nexr5go
Did you activate the SIM using the IMEI of the modem in the modem inside the router? or did you activate it with a phone or tablet IMEI? ATT may say it's active, but are you sure it is? What does the Network Status page say while you are trying to connect? What does the modem log say, or system log?...
- Sat Dec 03, 2022 5:23 pm
- Forum: Quectel Modems
- Topic: VPN causing overhesting
- Replies: 2
- Views: 1797
Re: VPN causing overhesting
That is super odd. I'm at a loss on this one.,
- Sat Dec 03, 2022 5:22 pm
- Forum: General and Unclassified
- Topic: Wifix nexr5go
- Replies: 11
- Views: 2499
Re: Wifix nexr5go
What carrier? What have you done so far?
- Thu Dec 01, 2022 8:12 am
- Forum: Internet Service Providers
- Topic: Verizon Solution
- Replies: 11
- Views: 4405
Re: Verizon Solution
Verizon prepaid. Seems they are buying up all their unlimited-esque mvnos
- Tue Nov 29, 2022 9:31 am
- Forum: Questions and Support
- Topic: FYI the external M.2 to USB modem adapter needs the lid off due to internal interference
- Replies: 9
- Views: 5541
Re: FYI the external M.2 to USB modem adapter needs the lid off due to internal interference
I wondered if the cables would benefit from shielded coverings.
Nice work.
Nice work.
- Sun Nov 27, 2022 11:14 am
- Forum: Cellular Antennas
- Topic: Does rain causes signal attenuation?
- Replies: 2
- Views: 2827
Re: Does rain causes signal attenuation?
It can effect it, but a solid antenna setup will be better than none, even in a heavy rain event.
How much it can effect it, honestly I don't think is very much. But each location is different.
How much it can effect it, honestly I don't think is very much. But each location is different.
- Fri Nov 25, 2022 1:18 pm
- Forum: Sierra Wireless Modems
- Topic: How to sit wan static ip
- Replies: 1
- Views: 2303
Re: How to sit wan static ip
That requires the proper APN from the carrier. The carrier assigns the IP address via proper APN. This sets the wwan0 IP, not the WAN IP. WAN and wwan0 are completely different interfaces. I'm assuming your using a cell modem? Or are you actually pluggin in an ISP modem to the 35216 WAN port via eth...
- Thu Nov 24, 2022 12:03 pm
- Forum: Questions and Support
- Topic: FYI the external M.2 to USB modem adapter needs the lid off due to internal interference
- Replies: 9
- Views: 5541
- Wed Nov 23, 2022 1:44 pm
- Forum: OPEN | UNCLASSIFIED
- Topic: SOLVED: Honeywell T9 Smart Thermostat
- Replies: 8
- Views: 5785
Re: Honeywell T9 Smart Thermostat
Maybe open up 5671, 5672, and 443 to allow all inbound and outbound?
- Wed Nov 23, 2022 1:43 pm
- Forum: ZBT Routers
- Topic: WG1608 PCI Protocol T99W175
- Replies: 3
- Views: 1666
Re: WG1608 PCI Protocol T99W175
There is a reason the WG1608 is no longer sold by the wireless haven. I wouldn't say turd, but.... you get it.
Let's say it failed to translate.
Let's say it failed to translate.
- Tue Nov 22, 2022 3:40 pm
- Forum: OPEN | UNCLASSIFIED
- Topic: SOLVED: Honeywell T9 Smart Thermostat
- Replies: 8
- Views: 5785
Re: Honeywell T9 Smart Thermostat
What port does the Thermostat use for it's cloud connection, regardless of IP address?
- Tue Nov 22, 2022 11:15 am
- Forum: OPEN | UNCLASSIFIED
- Topic: SOLVED: Honeywell T9 Smart Thermostat
- Replies: 8
- Views: 5785
Re: Honeywell T9 Smart Thermostat
I don't tihnk forwarding is useless, I would go that route and play with firewall zone settings.
- Mon Nov 21, 2022 8:42 am
- Forum: ZBT Routers
- Topic: ZBT WG1608 and rooter project/GoldenOrb_2021-02-09 and 5ghz wifi network
- Replies: 14
- Views: 6671
Re: ZBT WG1608 and rooter project/GoldenOrb_2021-02-09 and 5ghz wifi network
It's not too crazy, really. Menu: Network->Interfaces->LAN->Edit. Change from Dynamic DHCP to Static IP and set to the IP address of choice for accessing the router. (192.168.1.1 is stock, I would go with 192.168.11.1 but make sure you write it down so you don't lose access to the routers UI later) ...
- Mon Nov 21, 2022 8:40 am
- Forum: Questions and Support
- Topic: FYI the external M.2 to USB modem adapter needs the lid off due to internal interference
- Replies: 9
- Views: 5541
Re: FYI the external M.2 to USB modem adapter needs the lid off due to internal interference
I've not seen this. I'll have to do some testing now, lol. Thanks
- Sun Nov 20, 2022 10:49 am
- Forum: Tutorials
- Topic: Qucetel RM502-AE with TMobile 5G SA & NSA fix
- Replies: 7
- Views: 3372
Re: Qucetel RM502-AE with TMobile 5G SA & NSA fix
MTU 1472 that makes more sense, lol.
- Sat Nov 19, 2022 9:33 am
- Forum: Tutorials
- Topic: Qucetel RM502-AE with TMobile 5G SA & NSA fix
- Replies: 7
- Views: 3372
Re: Qucetel RM502-AE with TMobile 5G SA & NSA fix
1472?... modify your TTL settings to 1472 ....
One Thousand Four Hundred Seventy Two?
Are you sure? That's crazy high. Not that I would be too surprised, but... wow.
- Fri Nov 18, 2022 10:39 pm
- Forum: ZBT Routers
- Topic: ZBT WG1608 and rooter project/GoldenOrb_2021-02-09 and 5ghz wifi network
- Replies: 14
- Views: 6671
Re: ZBT WG1608 and rooter project/GoldenOrb_2021-02-09 and 5ghz wifi network
It can be used either way. I would disable dhcp (static IP set first on the interfaces) and wifi radios on the wg1608 and then just plug into the main VILO. BUT you can just plug it in and let it configure o nits own, they are vey plug and play with their simple app. I don't like Apps for wifi syste...
- Fri Nov 18, 2022 9:17 am
- Forum: ZBT Routers
- Topic: ZBT WG1608 and rooter project/GoldenOrb_2021-02-09 and 5ghz wifi network
- Replies: 14
- Views: 6671
Re: ZBT WG1608 and rooter project/GoldenOrb_2021-02-09 and 5ghz wifi network
To put it in my own words:
You want to use your WG1608 as an internet source and feed it to another system that can properly handle all wifi devices and provide good coverage?
I have been really liking Vilo: https://store.viloliving.com/
You want to use your WG1608 as an internet source and feed it to another system that can properly handle all wifi devices and provide good coverage?
I have been really liking Vilo: https://store.viloliving.com/
- Thu Nov 17, 2022 10:54 pm
- Forum: Cellular Antennas
- Topic: 2x2 MIMO 5G "BLASTER" antenna From WiFiX Antennas just released
- Replies: 0
- Views: 3058
2x2 MIMO 5G "BLASTER" antenna From WiFiX Antennas just released
Budget 2x2 MIMO that I think is as good or better than most of the other similar 2x2 MIMO flat panels. I'll soon be testing two of them together for 4x4 MIMO setups.
https://thewirelesshaven.com/shop/anten ... laster-5g/
https://thewirelesshaven.com/shop/anten ... laster-5g/
- Thu Nov 17, 2022 6:40 pm
- Forum: Quectel Modems
- Topic: Quectel RM520N-GL modem came with corrupted IMEI.
- Replies: 7
- Views: 4915
Re: Quectel RM520N-GL modem came with corrupted IMEI.
Quectel modems all use the same command to see the imei. Look for information on AT+EGMR
- Thu Nov 17, 2022 11:50 am
- Forum: TTL Settings - Throttling, Tethering and Hotspot Usage
- Topic: Tmobile is cracking down on data usage ?
- Replies: 18
- Views: 4410
Re: Tmobile is cracking down on data usage ?
Supposedly the latest 502 firmware had some tmo fixes in it, something about UDP though. I've seen the ICMP and ICMPv6 issues before. I wish they would standardize and stop jacking with "special carrier firmware" type jobbers.
- Thu Nov 17, 2022 9:19 am
- Forum: TTL Settings - Throttling, Tethering and Hotspot Usage
- Topic: Tmobile is cracking down on data usage ?
- Replies: 18
- Views: 4410
Re: Tmobile is cracking down on data usage ?
If they updated anything on your tower, you might actually just have a tower issue. I'd called t-force and let them know your phone is dropping out off the tower constantly.
- Wed Nov 16, 2022 11:33 am
- Forum: General and Unclassified
- Topic: TAKTIKAL 9700
- Replies: 17
- Views: 2991
Re: TAKTIKAL 9700
I'm not a routing table expert, or even close.
openWRT Wireguard port forwarding is what I would search the interwebz for. Most liekly it's just port forwarding through firewall zones.
openWRT Wireguard port forwarding is what I would search the interwebz for. Most liekly it's just port forwarding through firewall zones.
- Wed Nov 16, 2022 8:24 am
- Forum: General and Unclassified
- Topic: TAKTIKAL 9700
- Replies: 17
- Views: 2991
Re: TAKTIKAL 9700
That should help yes, but you may experience slower speeds as running a VPN on the 400MHz single core 826 router base isn't real optimal. Wireguard is lightweight, but I'm just giving you a heads up that it might be noticeable.
Make certain you get a good geographically close VPS.
Make certain you get a good geographically close VPS.
- Tue Nov 15, 2022 2:53 pm
- Forum: Cellular Antennas
- Topic: 4x4 mimo mixed setup signal
- Replies: 5
- Views: 4691
Re: 4x4 mimo mixed setup signal
It could also be that the antenna is getting equal frequency reception from multiple towers, causing a form of RF noise called 'cross-talk'. Basically if you have more that one source broadcasting the same general frequency ranges, the receiver can see them all but on ly use the one it's linked to. ...