Search found 395 matches

by Adm1jtg
Sun Sep 26, 2021 2:39 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

If it lets you type in something that usually means you can pick anything
by Adm1jtg
Sun Sep 26, 2021 12:58 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

ok... https://www.vpnunlimited.com/help/manuals/how-to-manually-create-vpn-conf In step one pick the manually create new device Step 2 just pick a server you want to use. I would just pick one in the USA Step 3 In this document I dont see a choice for wireguard let me know if when you are doing this...
by Adm1jtg
Sun Sep 26, 2021 11:14 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

wireguard usually has an autoconfigure feature is thats whats asking you for the router type? so for wireguard I would try saying I had a mofi 4 or mofi 7 or just tell them you have a generic router running openwrt, if your on the 5-18-2020 version I believe its based on openwrt 18.6 and if your on ...
by Adm1jtg
Sun Sep 26, 2021 11:00 am
Forum: Tutorials
Topic: Installing Splash Page with Live Network Stats in GoldenOrb
Replies: 21
Views: 18688

Re: Installing Splash Page with Live Network Stats in GoldenOrb

@Didneywhorl I asked you in another thread but thought this might help remind you of exactly what I was after. Can you just make a simple module I could add in? I see all kinds of luci-config modules for things like adblock and all. For my needs I am thinking not even replace the current status page...
by Adm1jtg
Sun Sep 26, 2021 8:39 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

Say you have a zbt wg3526, its called lot of other names as well but zbt is the main manufacturer in china that makes them
by Adm1jtg
Thu Sep 23, 2021 12:05 pm
Forum: Firmware
Topic: New WG3526 Firmware
Replies: 25
Views: 6285

Re: New WG3526 Firmware

Gah, sorry. Too many projects have by brain fried. I'll see what I can find for you. No promises for a speedy return though. ;) was thinking how hard would it be to create a module that can be installed under system software that simply redoes the status page to the newer graphical interface we dis...
by Adm1jtg
Wed Sep 22, 2021 10:32 pm
Forum: Firmware
Topic: New WG3526 Firmware
Replies: 25
Views: 6285

Re: New WG3526 Firmware

@Didneywhorl not sure if you saw my other post about this new version as no one has replied but was curious if there was a way to import that status page menu or some way to directly display SINR on the old 5-18-2020 version. The menu visuals of the new version looked close enough that I am hoping y...
by Adm1jtg
Mon Sep 20, 2021 10:41 pm
Forum: Firmware
Topic: newest wg3526 firmware
Replies: 0
Views: 2195

newest wg3526 firmware

Have been running the 5-18-2020 firmware since I went online with this unit. Decided to upgrade to the most current version that is the 9/11/21 version. Did a factory format aka back to chinese menu's to load it up and manually set the few values on the router. Basically APN, TTL and a change in IP ...
by Adm1jtg
Mon Sep 20, 2021 6:37 pm
Forum: General and Unclassified
Topic: WG3526 and GoldenOrb Settings
Replies: 2
Views: 1563

Re: WG3526 and GoldenOrb Settings

I would go back to a full factory reset... where you get the chinese load screen and try to load the firmware clean. If you get the same results I would go back a version and see if the problem still exists. There is a previous version posted in the same area from feb 2021 There is also a version fr...
by Adm1jtg
Sat Sep 18, 2021 4:51 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

I would try a clean factory flash. The type where you go back to the chinese screens and flash a rom. Just for good measure I would use the latest wifix version or you could even try a rooter version though truth be told I have tried both in the past and couldnt see any difference at all But a clean...
by Adm1jtg
Sat Sep 18, 2021 3:52 pm
Forum: Internet Service Providers
Topic: Visible Support
Replies: 5
Views: 2969

Re: Visible Support

how very helpful, just what I would have expected though.
by Adm1jtg
Fri Sep 17, 2021 8:59 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

not sure there is a good one. I am on verizon and while my streaming is good all the time wqhen I try and download files over 10 meg or so it typically drops the conection. Takes me multiple retries with a download manager to get the file downloaded. That or i use a vpn and the fie downloads just fi...
by Adm1jtg
Thu Sep 16, 2021 3:45 pm
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 69
Views: 32496

Re: Wireguard on ROOter?

Many times when updating to a higher, or lower, linux kernel it wont take unless you use the firmware recovery method / bootloader. I do it all the time, it's no harm or hassle in my experience. Oh I know I probably did it a dozen times a year or 2 ago when I was first setting things up, but I noti...
by Adm1jtg
Thu Sep 16, 2021 10:44 am
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 69
Views: 32496

Re: Wireguard on ROOter?

Wasn't able to work out display bugs from using 4x4 MIMO modems. Still working on it. Would you be willing to post the needed update files with directions on how to apply them so I could test it myself? I am only on a 2x2 mimo with an ep06-a modem so while you cant get it to work for ALL wg3526 con...
by Adm1jtg
Wed Sep 15, 2021 9:46 pm
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 69
Views: 32496

Re: Wireguard on ROOter?

but does it have the new status screen that displays SINR?
by Adm1jtg
Wed Sep 01, 2021 5:48 pm
Forum: General and Unclassified
Topic: Modem AT Commands - OpenWRT SnapShot
Replies: 1
Views: 885

Re: Modem AT Commands - OpenWRT SnapShot

Most in here actually use a separate device for WiFi. So a wg3526 for all modem functions using either rooter or wifix, regular golden orb I don't believe directly supports modems thus why you don't have the modem tab. The other device for WiFi is just any simple router connected via Ethernet. Perso...
by Adm1jtg
Wed Sep 01, 2021 3:46 pm
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

My plan for example will throttle at will as their algorithm deems necessary.

I also am on a sparsley populated area, as I keep saying more cows then people and consistently the mornings see downloads between 30-40, while at night it's not at all uncommon to see no faster then 10
by Adm1jtg
Wed Sep 01, 2021 7:57 am
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

Wait... So in morning are you consistently higher then 5? If so your likely not being throttled, likely the server is just experiencing higher utilization during the day and at night thus reducing your speed. If this is the case a vpn likely won't help. Again if every morning you see 20 or so or at ...
by Adm1jtg
Mon Aug 30, 2021 1:23 pm
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

I forms with my setup band 5 want as good as 66 yet little with your setup mine would jump to 5 often. I locked my modem to only use 66. Might want to try that was a test.

Test at all times of day.
by Adm1jtg
Sat Aug 28, 2021 8:26 pm
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

dbshelton wrote: Sat Aug 28, 2021 8:05 pm Not yet. Probably will tomorrow. Not sure where I am going to put it yet. I really don't think the current location is best.
I think the basic rule of thumb is to put it on one edge of the roof and don't aim across your roof. Always aim away from the house.
by Adm1jtg
Sat Aug 28, 2021 8:13 pm
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 69
Views: 32496

Re: Wireguard on ROOter?

Did you happen to notice if the modem status page was the new graphical one that shows sinr?
by Adm1jtg
Sat Aug 28, 2021 6:56 am
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

For aiming what I do is lock to a single band, doesn't really matter which and then when on the roof with my phone I access the router interface via WiFi on my phone. I watch signal strength rscp rssi and and rsrp as I turn the antenna until I get the best values. You could probably just look at sig...
by Adm1jtg
Fri Aug 27, 2021 9:19 pm
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

CA is determined by the tower as to when and if its implemented. The modem has specific combinations thats are allowed for CA. My modem EP06-A allows CA of 66 to 66 so I simply locked my band to 66 only. Mind you this solution is customized to my setup. Band 66 may not be the best band in your area....
by Adm1jtg
Fri Aug 27, 2021 9:03 pm
Forum: Quectel Modems
Topic: EM12: working with Verizon bands
Replies: 9
Views: 5634

Re: EM12: working with Verizon bands

What they are doing there is locking to specific cell radios on their tower. This allows you to force the radio to use only very specific radios on one tower. This way, if you can figure out your absolute best radios (Info from AT+QENG="servingcell" and "neighborcell") you can u...
by Adm1jtg
Fri Aug 27, 2021 11:03 am
Forum: ZBT Routers
Topic: WG3526 Lost The 5.0 Wifi
Replies: 1
Views: 1810

Re: WG3526 Lost The 5.0 Wifi

If you just cant find the settimg you changed you can always just do a factory reset but this assumes you remember all the steps you took to setup the router when it was new. Personally I also have the wg3526 but hve disabled all the wifi on it and run via ethernet an archer c8 ($40 used) to handle ...
by Adm1jtg
Fri Aug 27, 2021 10:56 am
Forum: Quectel Modems
Topic: RM500Q-AE Webserver menu
Replies: 5
Views: 1644

Re: RM500Q-AE Webserver menu

What router are you running? It would be better to load wifix or rooter on your router if it supports it.
by Adm1jtg
Fri Aug 27, 2021 10:50 am
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

I use the b66 with ca to b66 as my main setup. I have my bands locked to 66 only. What the CAA part does is as follows: The initial connection to band 66 in my setup is either 20mhz or 10 mhz seems to depend on something on the tower side that I cannot control. The CAA kicks in when the tower deems ...
by Adm1jtg
Thu Aug 26, 2021 3:47 pm
Forum: Quectel Modems
Topic: RM500Q-AE Webserver menu
Replies: 5
Views: 1644

Re: RM500Q-AE Webserver menu

Well looing at your image I would ask.... Have you tried downloading and using firefox like it suggests?
by Adm1jtg
Thu Aug 26, 2021 3:46 pm
Forum: WiFiX Routers
Topic: WIFIX-NEXQ6GO EM160R-GL
Replies: 5
Views: 2151

Re: WIFIX-NEXQ6GO EM160R-GL

Well my setup is ONLY 2x2 and I have a wg3526. Got that one for exactly th e reasons you are talking about. Should I ever want/need to go to 4x4 modding the smaller cases would be a pain. Also was worried about heat as I live in Georgia and the em3526 is metal and has much more interior space. Also ...
by Adm1jtg
Thu Aug 26, 2021 3:31 pm
Forum: General and Unclassified
Topic: Hi anyone have some experience
Replies: 13
Views: 2905

Re: Hi anyone have some experience

For me was much simplier. One hole to have to feed the cabes through and buy 2 cables of identical length
by Adm1jtg
Thu Aug 26, 2021 3:27 pm
Forum: WiFiX Routers
Topic: WIFIX-NEXQ6GO EM160R-GL
Replies: 5
Views: 2151

Re: WIFIX-NEXQ6GO EM160R-GL

Your trying to do what get a 4x4 mimo setup? If yes then you COULD use the holes in the case where the wifi pigtails went but you would have to replace the pigtails and hook the new pigtails to the modem. The old pigtails are likely soldered to the motherboard and thus would have to be wrapped in so...
by Adm1jtg
Thu Aug 26, 2021 7:04 am
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

network/firewall then across the top custom rules.
Paste all that stuff in there. I would assume overwriting whats already there as it sppears he is changing values from default
by Adm1jtg
Wed Aug 25, 2021 7:53 am
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

I would agree
What happens if you pop that sim back in the phone you activated on and run a speed test
Do you break 5 meg down?
by Adm1jtg
Tue Aug 24, 2021 6:34 pm
Forum: Cellular Antennas
Topic: Flat Panel Options
Replies: 3
Views: 2387

Re: Flat Panel Options

I would think the panel with 2 inputs simply has 2 elements inside it. Like 2 antennas in one enclosure.
by Adm1jtg
Tue Aug 24, 2021 6:10 pm
Forum: General and Unclassified
Topic: Please Help A Newby Build A Cell Router
Replies: 57
Views: 9797

Re: Please Help A Newby Build A Cell Router

Dr-BroadBand wrote: Tue Aug 24, 2021 5:14 pm It help :geek:

See link

https://vpnpick.com/does-a-vpn-use-data
I was just going by what gscheb said in another thead, that he was able to get it bypassed using a vpn, his firewall rules and a ttl of i think it was 88
by Adm1jtg
Tue Aug 24, 2021 4:23 pm
Forum: General and Unclassified
Topic: Please Help A Newby Build A Cell Router
Replies: 57
Views: 9797

Re: Please Help A Newby Build A Cell Router

time for a vpn
by Adm1jtg
Tue Aug 24, 2021 11:32 am
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

What I am thinking is I have such a crappy signal/connection I need to try new antenna and placement also. Also, is there a good list of AT commands for the EPO6-A to try band locking? Thought I had linked this before... must be in a different thread Thos covers almost all the basics of at commands...
by Adm1jtg
Tue Aug 24, 2021 9:04 am
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 69
Views: 32496

Re: Wireguard on ROOter?

correct, even things like apn and ttl will need to be typed back in after a flash
by Adm1jtg
Mon Aug 23, 2021 10:21 pm
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 69
Views: 32496

Re: Wireguard on ROOter?

I have run in the past rooter, official pre builds of goldenorb and wifix all interchangeably. I do seem to recall there were some instances where I had to do the Full Factory Reset method where my router was put all the way back to its chinese boot and then load up the individual firmwares. As far ...
by Adm1jtg
Mon Aug 23, 2021 9:29 pm
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 69
Views: 32496

Re: Wireguard on ROOter?

Well I dont like messing with my router to much as its my sole source of internet other then my phone, so I figure will let someone else flash and tell me if the interface is in there :D
by Adm1jtg
Mon Aug 23, 2021 8:54 pm
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

The method for a quectel modem in a router running goldenorb/wifix/rooter to set to band 66: go to modem/miscellanious in the AT Command terminal area in the AT-command field type the following: AT+QCFG="band",0,20000000000000000,1 hit the send command button then go to system/reboot and h...
by Adm1jtg
Mon Aug 23, 2021 8:42 pm
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 69
Views: 32496

Re: Wireguard on ROOter?

Well since trhis thread is also all about rooter do you know if rooter uses that interface or if their aug 15 build has the interface and/or wireguard implementation included.
by Adm1jtg
Mon Aug 23, 2021 8:24 pm
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

66 is typically a wider band then most (20 mhz) in a lot of places
i would give 66 a try for grins you may find you like it better
by Adm1jtg
Mon Aug 23, 2021 7:23 pm
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

looks like he was pulling 40 meg down on band 5 early in the morning, I assume he would be ok with that but at night he was down to 5 meg down with roughly the same stats
by Adm1jtg
Mon Aug 23, 2021 7:21 pm
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 69
Views: 32496

Re: Wireguard on ROOter?

Not sure if you are talking about this below. https://wirelessjoint.com/viewtopic.php?t=418 Yes thats what I was referring to last I heard it was not available in wifix builds for the wg3526 and I dont think there were even directions on how to port it into current wg3526 builds or I would have tri...
by Adm1jtg
Mon Aug 23, 2021 6:24 pm
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 69
Views: 32496

Re: Wireguard on ROOter?

The latest builds of rooter and WiFiX have Wireguard built into the firmware. Do you remember the post from way back where you showed a new status page that displayed sinr and such? Do either the new rooter build or the latest The Wireless Haven build we cannot find have this new status page implem...
by Adm1jtg
Mon Aug 23, 2021 6:15 pm
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

Since your stats lok to be rougly the same and your on the same band:
sounds like either major congestion on that tower at night or if your on visible you might be being throttled. 5 meg cap is what happens when your throttled on visible
by Adm1jtg
Mon Aug 23, 2021 3:56 pm
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 23112

Re: Wilson Antennas

I have used the booster with one of the directional antennas and Cell Tower Locator app to locate the tower I want to aim the antennas for the modem. It is 2.4 miles away and a pretty good signal. I was thinking about mounting the booster antenna about 40' away on another mast. Just remember the lo...
by Adm1jtg
Mon Aug 23, 2021 3:41 pm
Forum: General and Unclassified
Topic: Seeking Some Validation
Replies: 7
Views: 1616

Re: Seeking Some Validation

850 is verizon band 5 which is a valid option, 1900 is band 2 (i think both up and down though not sure) also a valid option on verizon. That said the more popular bands seem to be 4,13 and 66
by Adm1jtg
Mon Aug 23, 2021 3:29 pm
Forum: Questions and Support
Topic: MIMO Testing
Replies: 7
Views: 2930

Re: MIMO Testing

Didneywhorl wrote: Mon Aug 23, 2021 8:01 am AT+QRSRP isnt implemented on the EP06A I think
I can confirm that enterimg that command on an ep06-a modem comes back as error, so I would agree its not a valid command on ep06-a
by Adm1jtg
Mon Aug 23, 2021 3:01 pm
Forum: General and Unclassified
Topic: WiFiX-NEXQ6GO and Band Locking
Replies: 5
Views: 1720

Re: WiFiX-NEXQ6GO and Band Locking

While I still dont recommend this, as its a bandaid fix, as stated above this one command will lock you to band 25 On the router go to modem misc and in the AT-Command area copy paste the below AT+QCFG="band",0,1000000,1 Then click on send command You should get an ok in the box below the ...
by Adm1jtg
Sun Aug 22, 2021 9:07 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

Please refresh my ailing memory what your using for antennas?
by Adm1jtg
Sun Aug 22, 2021 8:08 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

at least that is an option for you. in my case I live in the mountains with heavy trees all around and as i have said many times more cows then people. I am doing to to just avoid mountains here. In your specific last case it seems congestion is your issue which you have no direct control over. All ...
by Adm1jtg
Sun Aug 22, 2021 7:20 pm
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 69
Views: 32496

Re: Wireguard on ROOter?

wireguard is a specific proticol used in VPN
so it will help as much as any vpn would help with visible.
In case your interested
https://www.wireguard.com
by Adm1jtg
Sun Aug 22, 2021 4:22 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

If I remember when you were starting with all this wasnt it you that moved the router from one side of the house to the other and we suspect you ended up changing towers? If so and your having congestion issues on tower #1 I would try the router on tower #2. If your on external antennas now you coul...
by Adm1jtg
Sun Aug 22, 2021 11:02 am
Forum: General and Unclassified
Topic: Please Help A Newby Build A Cell Router
Replies: 57
Views: 9797

Re: Please Help A Newby Build A Cell Router

my bad I should have put the no sim imei and it being a sim recognition failure together
by Adm1jtg
Sun Aug 22, 2021 8:41 am
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 69
Views: 32496

Re: Wireguard on ROOter?

I would also be intersted but as well interested in a basic changelog of whats been updated since the may 2020 build i am currently running. Also differences between wifix which i am using and rooter, as rooter has a version dated 8-15-2021. Would personally rather stay with wifix as the support her...
by Adm1jtg
Sun Aug 22, 2021 8:04 am
Forum: General and Unclassified
Topic: Please Help A Newby Build A Cell Router
Replies: 57
Views: 9797

Re: Please Help A Newby Build A Cell Router

Ok i know you have done some of these commands before but this is a start to finish step by step that I have seen work in another thread for another visible user with the same symptoms you have. First enter the APN in the Modem menu->Connection profile as: vsblinternet Make sure nothing else is ther...
by Adm1jtg
Sun Aug 22, 2021 7:45 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

Have you tried locking the different lte bands to see how each performs? When I was doing mine I had a spreadsheet that listed lte band, time of day, weather conditions if i thought they might apply, rscp, ecio, signal strength and such and filled that out of rall available bands in my area. I also ...
by Adm1jtg
Sat Aug 21, 2021 10:28 pm
Forum: General and Unclassified
Topic: Please Help A Newby Build A Cell Router
Replies: 57
Views: 9797

Re: Please Help A Newby Build A Cell Router

whats your modem status page look like. Is it stuck in like a connecting state?
by Adm1jtg
Sat Aug 21, 2021 9:09 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

I think pm's are disabled on purpose and I have not seen anyone post emails for direct contact either so I am guessing thats intentional as well.

Maybe one of the mods can chime in
by Adm1jtg
Sat Aug 21, 2021 4:38 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

Well if phone speeds are consistently good and your throttled on router even after all the ttl "fixes" including the ones gscheb posted as firewall rules then it comes down to how "legal" of a solution you want. It IS possible to make your router mimic your phone so visible sees ...
by Adm1jtg
Sat Aug 21, 2021 8:00 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

https://wirelessjoint.com/viewtopic.php?t=674#p5763 Scroll down like 5 posts to the long list of commands and values for bandwidth Like I have said in other threads locking bands for testing is great but it would be better to exclude then lock. Meaning if you dont like band 2 and like band 5 rather ...
by Adm1jtg
Fri Aug 20, 2021 9:09 pm
Forum: General and Unclassified
Topic: Want to use Verizon
Replies: 10
Views: 2150

Re: Want to use Verizon

I have that exact combination and have been running on verizon for almost a year.Before you ask the plan I am on was ONLY for 55+ and is no longer being offered.
by Adm1jtg
Fri Aug 20, 2021 9:07 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

i am not sure which ones use the openvpn standard. I saw @gscheb say to try this in another thread: This was for hotspot with a tethered phone but i wonder if it would help in your case as well. I did the @gscheb so hopefully he will chime in Put this into the firewall custom rules #start TTL rules ...
by Adm1jtg
Fri Aug 20, 2021 1:26 pm
Forum: Internet Service Providers
Topic: Visible Sim Card Activation
Replies: 10
Views: 3415

Re: Visible Sim Card Activation

Well like so many others in here I am on a plan verizon no longer offers, It was a loyalty plan specifically for 55+ customers
by Adm1jtg
Fri Aug 20, 2021 9:33 am
Forum: Internet Service Providers
Topic: Visible Sim Card Activation
Replies: 10
Views: 3415

Re: Visible Sim Card Activation

I would agree I used visible for a little while but ended up with my long term solution being with verizon directly
by Adm1jtg
Thu Aug 19, 2021 10:30 pm
Forum: Internet Service Providers
Topic: Visible Sim Card Activation
Replies: 10
Views: 3415

Re: Visible Sim Card Activation

if I remember to activate a sim for visible it must be installed into a "vsible approved device" aka one of the devices listed on their certified list. Luskily when I was messing with it I had an old original generation pixel xl which just happens to be on their approved list. i have seen ...
by Adm1jtg
Thu Aug 19, 2021 10:27 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

I would searh on how to setup a vpn on openwrt and see how close the instructions are to your menu layout and all. I would bet it is almost identical since its all based on openwrt to begin with
by Adm1jtg
Thu Aug 19, 2021 1:58 pm
Forum: General and Unclassified
Topic: Please Help A Newby Build A Cell Router
Replies: 57
Views: 9797

Re: Please Help A Newby Build A Cell Router

On the left click on modem and choose connection profile In the APN field type in VSBLINTERNET then go to network and firewall and across the top pick custom ttl settings change ttl value to 64. That should get you basic imternet. Once all that is working you need to start doing speedtests and gathe...
by Adm1jtg
Thu Aug 19, 2021 7:21 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

is it throttling when the sim is in the original phone as well?
by Adm1jtg
Wed Aug 18, 2021 11:24 pm
Forum: General and Unclassified
Topic: Please Help A Newby Build A Cell Router
Replies: 57
Views: 9797

Re: Please Help A Newby Build A Cell Router

you may need to set a static ip address on your computer, something like 192.168.1.100
by Adm1jtg
Wed Aug 18, 2021 8:21 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 50848

Re: NEXR5GO Router and EP06-A Modem

streaming things like netflix and the like in my expierence will work fine with as little as 10meg as they cache heavily. 10 is about my lowpoint in my setup as stated earlier I can get up to 30 but even at 10 I can typically have 2 streams going through roku's and sometimes even play a YouTube all ...
by Adm1jtg
Wed Aug 18, 2021 8:17 pm
Forum: General and Unclassified
Topic: Please Help A Newby Build A Cell Router
Replies: 57
Views: 9797

Re: Please Help A Newby Build A Cell Router

I believe the login id is admin ad the password admin as well

Go to advanced search