Wireless Joint

Does your verizon plan have unlimited tethering data or does it like mine slow data on tether to 2g/3g speeds. Wondering if it is working properly but that verizon is seeing you as tethering and thus slowing your data to unusable speeds. TTL trick never worked with me on verizon thats why I suspect ...

Does your verizon plan have unlimited tethering data or does it like mine slow data on tether to 2g/3g speeds. Wondering if it is working properly but that verizon is seeing you as tethering and thus slowing your data to unusable speeds. TTL trick never worked with me on verizon thats why I suspect ...

I have a WE1326 using WiFiX firmware with a Quectel EC25-AF modem.

Due to issues I was having with AT&T's internet quality in our area I decided to give Verizon a try. I'm getting a good connection, and looking at the status pages the modem appears to be connecting fine. Also, using the Network ...

... to do it.
Since then wanted to use it on whole house so put it into we1326 with em12 with ttl 64 no more throttling issues.

The thing that's ... t be changed on an iPad unless it's jailbroken.

Visible (and I think Verizon in general) uses TTL. I use that when tethering from my Visible phone ...

... lol.

Router

https://thewirelesshaven.com/shop/routers/lte-routers/we1326-lte-router/

Modem

https://thewirelesshaven.com/shop/modems/quectel ... I've heard they have a higher ping and lower down speeds than a regular Verizon plan so I will have to see. Any comments/suggestions?

I really need ...

... 10 machine. Works well actually.

However, when I put this in a WE826/WE1326(first boot inside a router):

Watching the Debug window, I see the ... factory"( the default settings after a factory reset and inserting a verizon SIM card) settings for vzw, it completes the connection and works ...

Still unable to get the EM06-a to work in a WE826 or a WE1326.

If I factory reset, put the EM06 in a usb enclosure, connect to windows, set QMI mode, set it up via Huwaei terminal, the modem connects no problem on verizon. I can disconnect and reconnect the USB at will, still reconnects.

I'm literally ...

... the router, the modem initially boots up in MBIM mode. Connects to verizon fine, good results with speed test and downloads. Higher latency.

When ... a USB adapter but can order one. Does this in both my WE826 and the WE1326, I reflashed both just to be sure it wasn't an OS issue. I guess I could ...

... do, like:
https://thewirelesshaven.com/shop/routers/lte-routers/we1326-lte-router/

or

https://thewirelesshaven.com/shop/routers/cradlepoint-routers/cradlepoint-cba850lp6-na-cat6-att-verizon-t-mobile-sprint-refurbished/
This Cradlepoint is an example of an LTE router that uses a proprietary ...

I've looked, but I must be searching the wrong things.

The router I was planning to put together is with the sierra em7565 modem and the we1326 router. Does anyone have any experience whether a phone sim works on those?

edit: seems to be the same issue with the 7565

... that I am a newbie not sure what I am doing and how to do it.brought we1326 router did not come with instructions or manual. Where can I find tutorial for setup for Verizon?

Did you buy this with an LTE modem in it? If yes what model? and if no, where did you buy it and for how much? message me ...

Factor wrote: Fri Jan 31, 2020 2:39 pm Yes but do I need band 41? That shows on the ep06-e which I thought was for Europe?

ep06-a shows att, verizon and sprint.

Band 41 is for Sprint only.

Yes but do I need band 41? That shows on the ep06-e which I thought was for Europe?

ep06-a shows att, verizon and sprint.

... that I am a newbie not sure what I am doing and how to do it.brought we1326 router did not come with instructions or manual. Where can I find tutorial for setup for Verizon?

There's probably not a single post which will walk you through step by step in building and configuring your router ...

Hello let me first say that I am a newbie not sure what I am doing and how to do it.brought we1326 router did not come with instructions or manual. Where can I find tutorial for setup for Verizon?

Thank you for the quick reseponse! I'm sorry I forgot to post that. Below you'll see the results from the Verizon SIM and the ATT SIM. Now I just a minute ago reflashed the firmware back to the same version and set it up again. I got the Router/Modem to allow the SIM to connect, however I'm actually ...

Hey guys, has anybody had issues getting ATT sims to connect with the WE1326 Rouuter?

Setup is below:
WE1326 Router V05 256M
WiFix Firmware - says this ... antenna problem, Modem problem, or m.2 adapter problem. I popped in my Verizon Sim and changed apn to 'vzwinternet', and it works flawlessly. Actually ...

I bought Cradlepoint CBA850LP6-NA CAT6 (AT&T, Verizon, T-Mobile, Sprint) REFURBISHED from store here.
I was using WE1326 + MC7354 CAT3 with external anttena and getting 5~10Mps most of time.
With Cradlepoint somehow I got much better signal and getting 20Mps regularly now!!

I found the modem ...

I have had the same problem with Verizon with both a Sim from my verizon phone and then a sim from a verizon tablet.
it would work in the phone or ... service for that line I had to get removed. I am using a EM7565 in my WE1326 router. In the end I ended up buying a used panatech modem from ebay for ...

WE1326 (GoldenOrb 2019-03-10)/MC7455 (shipped Generic version), QMI mode.

Since the initial build, the router has been re-flashed and modem reset. Setup used with Verizon postpaid 15GB hotspot sim and Straight Talk Prepaid sim with no problems.

Trying to test with GoUnlimted cell sim from Pixel (New ...

... of Ebay for $6. Went and got a Sim from Best buy. I then used the pantech IMED # to register the Sim on my account. I put the Sim directly into my WE1326 router with EM7565. I did not ever put this in the pantech.
Thanks for the heads up, I am a happy camper now.

Glad to hear this worked for you ...

... buy a used Pantech UML290 modem off of Ebay for $6. Went and got a Sim from Best buy. I then used the pantech IMED # to register the Sim on my account. I put the Sim directly into my WE1326 router with EM7565. I did not ever put this in the pantech.
Thanks for the heads up, I am a happy camper now.

... MT7621A processor, running at 880MHz. That's the processor used in my WE1326 router and your WG3526 router.

Your WE826 uses the MediaTek MT7620A ... number (2) in my other post. Number (1) is a different issue with Verizon.

You'll never get lower latency with a VPN than without, on any system ...

... if I recall, if we can run in QMI now and not worry about it then I'll give it a go.

I verified that MBIM has higher latency than QMI with a WE1326 router and EM7565 modem running GoldenOrb. The following pings were run from a Windows computer connected via ethernet to the router.

20 pings at ...

... through all the effort of actually tracking it down... but I got there in the end :) )

I verified that MBIM has higher latency than QMI with a WE1326 router and EM7565 modem running GoldenOrb. The following pings were run from a Windows computer connected via ethernet to the router.

20 pings at ...

... t as good as yours, so it could just be that. Or, it could be that the WE1326 suffers the same issue.

What were you pinging?

So, yesterday I went and did the same thing, but I'm using builds from last year (2018) for both my WE826 and WG3526. Both trying with ATT (Mobley Sim) and Verizon Sims. 8 ...

... round trip times in milli-seconds:
Minimum = 35ms, Maximum = 77ms, Average = 55ms

I'll have to try the sim in a phone sometime to see how it compares. My SINR isn't as good as yours, so it could just be that. Or, it could be that the WE1326 suffers the same issue.

What were you pinging?

Got it all hooked up working like it suppose to with Verizon.

I have try to get the EM7565 through a WE1326 router running Golden Orb on my verizon unlimited account. first tryed with tablet plan sim activated on a tablet. Verizon deregistered me.
I the thought that I would just get the modem registered as a USB modem since it is shown supported under the ...

I am also wondering if I should have put the verizon sim card directly into router and never have put it in the tablet. dont know if it would mater or not.

... up and get internet. Signal sucks at current location but it is working. I guess what this means is the router and modem do indeed work and Verizon is preventing me from using this on their network. I might see what they say if I try to add my modem to my plan using the modems IMED #. I'm ...

... though in my experience a modem either works or it doesn't (less some firmware or configuration issue). The fact that it is connecting to Verizon network before being unregistered and booted, tells me the modem is doing its job (and perhaps, so is Verizon).

Have you tried a different ...

Jim,
I had to get in contact with Verizon to get my tablet sim to be able connect to the internet. I used onlline chat.
They had a service block on my tablet sim. I got tablet back able to access internet. I have down loaded and re flashed the modem 2 times. reflashed router and configured with APN ...

... me. Normally putting the Sim back into the tablet will get it back register, but now, even the tablet stays de registed. I am thinking Verizon has locked me out.
here is what I got when connected and also when disconnected. Thoughts?
modem connected.JPG
Gstatus5_31_19.JPG
LTEINFO ...

It is passing the IPV4V6 APN for Verizon.

Run this command:

Code: Select all

at!entercnd="A710"
AT!PCINFO?

The 311 480 is the Verizon network.

Also, the network has you deregistered, and the modem is in RCC Idle.

This can happen for a number of reasons to include something with the APN not getting passed through correctly from the router firmware. The command above with return the APN that is programmed ...

It could possibly be a glitch in the firmware.

This may sound a little strange, but are you certain you are in distance of a Verizon tower. Know that your cell phone will connect under the carrier roaming agreement where the modem may not.

Run the

AT!GSTATUS?

command and then the

at!lteinfo ...

... and I can connect and access internet.
I have put this Sim into The We1326 and I still cannot connect. The modem is present the Sim is ready and it ... the modem AT port. I used Putty and restored the functionality. I am on verizon and using a TTL of 117. APN is VZWINTERNET which matches what both my ...

Of course I had the tablet up and running on Verizon, it was showing up on Verizon as a tablet and then swapped over to router. Before changing my TTL
from 64,65 to 117, it did show as hotspot use.

Here is the little bit that I know. I'm running a tablet sim from Verizon, my ttl is set @ 117, it hides the hot spot use! I have a unlimited plan, 2 phones, and 2 tablets, 1 tablet I use as a tablet, the other sim is in my router. So I pay tablet rate, 20@ month, mines military discount. 17.00@ month ...

I was considering adding a tablet to my account just to activate sim and then use that. I need to see from Verizon how that counts to data. Looks Like I have some testing to do.
Thanks for your help so far.

yes, Generic firmware on modem.
No all my sim are from Verizon on the same Plan.
any options?

Tried that, still wont connect. This is the message I get from Verizon

"Someone on your account has switched from the LG to the by moving SIM cards. This change, however, will not work because the SIM is on an unlimited plan and incompatible with . We recommend replacing the SIM in the original or ...

Jim,
I have it running & can see SIM . I cannot connect. My provider is Verizon. I am using my phone SIM. When I use it in the router It will not connect and Verizon sent me a email stating the device is incompatable with my phone plan.
Anything I can try? TTL is set to 65.
Thanks.

I would ...

Jim,
I have it running & can see SIM . I cannot connect. My provider is Verizon. I am using my phone SIM. When I use it in the router It will not connect and Verizon sent me a email stating the device is incompatable with my phone plan.
Anything I can try? TTL is set to 65.
Thanks.

... of this writing).

I had been having issues where the EM7565 on the WE1326 was getting stuck on a particular Verizon band and no longer performing Carrier Aggregation correctly. I was hoping that flashing the latest Verizon firmware would fix this bug. The only ways I've found to work around that ...

I've been using my EM7565 with the ZBT WE1326 for a few months now, on the default generic firmware that came with the modem. Today I tried to flash the latest carrier-specific firmware version out (for me it was Verizon), using the M.2 to USB adapter I also have. I flashed it, and used putty to verify ...

Search found 47 matches: We1326 verizon