Wireless Joint

Make sure your running your queries in the middle of a heavy download, or speed test.

CA only shows up during the activity.

Your getting 2xCA and you have a fair signal, with a CSQ of 27. Max is 31 and is the goal. Id say focus on signal optimization, and leave this one alone.

Unless your somehow connecting to 5G networks, your not going to get network registration with C5GREG. These are unsolicited results running in the background. I wouldn't worry about them at all. I could be wrong, but I think this ones not a problem. Now if you saying your modem isnt connecting and ...

Wait, what is the issue? You say it is running, internet connected. You just want to know what the error is at the end of the debug stream?

You've done some work! Good stuff! The best setups Ive seen put the router up as high as possible, outdoors, WITH the antennas. 1. If your not using 2 external antennas, like your unit is using internally, possibly 4, your really spinning your wheels. 2. All units can be placed outdoors and powered ...

Jim has the answers.

My account uses r.ispsn, but there is x.ispsn and n.ispsn as Access Point Names

Also, use all lower case letters. Not 100% it matters, but just in case

Making sure I understand..... If you plug in a PC to a LAN port on the H721, you have internet access. If you plug the USG into it, and plug your pc into the USG, you do not have internet access on your PC. This sounds like a settings problem on the USG. I would turn off the static IP settings on yo...

Do you have your h721 plugged into, and setup, as/at WAN on the usg? As is always the case for me, its likely a stupid simple setting.

Thats odd, unless you also have your pc set to a static ip address, it shouldnt be able to communicate at all with dhcp turned off.

The psu that comes with the we826 is from the original Chinese manufacturer, ZBT. It is known to sometimes has issues, not always.

thewirelesshaven.com has a better one, that I purchased, that supplies 2.5amps.

The phone is likely getting better signal. Phones are made with MUCH higher category modems and very powerful transmission strength. The we826 needs a solid pair of antennae to match the phone. Signal strength is your culprit most likely. I get 85+Mbps on my we826/mc7455 with just the rubber spike a...

Did you turn off dhcp on the h721?

Usually an easy start is the we826 router with a Quectel em12 or a Sierra em7565 or em7511 modem, using a mpcie to m.2 key B modem adapter.

Ive not used one, but a Cradlepoint CBA850 is popular and simple to setup.

You will definately be bottlenecked by it, but your prepared it seems. You can always upgrade later. The zbt wg3526 has gigabit LAN, but also needs an adapter. This bottlenecks throughput to about 400Mbps, in practice, 490Mbps in theory; USB 2.0 Bus speeds due to the adapter. Antennas are the real h...

MIMO is the use of multiple antennas. CA is the use of multiple frequency ranges within a single band, simultaneously. You can get CA without extra antennas. I think the telit LM960 uses all the bands you want. Yes, with the right mPCIe to M.2 key B LTE modem adapter, you can put any m.2 key b form ...

The bootload reset will use 192.168.1.1

Nice! The Telit LM960 is a great unit from what Ive seen, and I believe it does support 66 and 72, but not 100% sure. No time to earnestly look

From what I can tell, it looks like the 1200-B has bands 66 and 71, the 1200 does not. Tmobile uses 2,4,5,12,66,71. You should be fine. Im curious, though, what the actual modem module inside is; meaning manufacturer since Cradlepoinr isnt a modem chip maker. For the price, Cradleloint should give y...

No, your modem has a different imei that identifies the device, than your phone. Verizon is getting very strict on using phone accounts in modem/router/hotspot configs. Especially if the device wasnt the first one seen using that SIM. Others on here may have advice on how to bypass that, but Im not ...

What plan are you using for your service?

Does the device connect still, just no internet?

What signal stats are you getting?

Need more info.

Network-Interfaces-wireless-edit button on 2.4ghz

No, the mofi was getting lesser speeds because the nighthawk has better antennas inside. The mofi, which again is a white labeled we826 with an mc7455 inside, is capable of atleast 85-90Mbps. I can get such speeds on mine. The problem your having is signal strength. Your Nighthawk has better antenna...

Just make sure you get the A version of the Quectel, the E version has none of those bands.

Robonova, I responded on your post.

Huge huge it depends. Which you can get what is theoretically possible with what is listed in each modems spec sheets. The 7565 is a cat12 modem, the mofi 4500 uses a cat6 modem, the Nighthawk a cat16. Technically speaking, the nighthawk is fastest. The mofi and we826 both are the same base router t...

Let us know if they gave you a link

Finding tower strength is important and usually comes down to your own experimentation. I personally prefer the method of mounting the modem inside an antennas enclosure, or a separate watertight enclosure, with VERY short antenna cables ran to the antennas. Use PoE to power it over a high quality L...

.....atleast as a starting point.

I believe the mifi8000 has 2 ts9 connector antennae ports on its side. You may be better off getting a set of ts9 to sma adapters, a pair of low loss LMR400 coax cables with sma connectors on one end and type N connectors on the opposite end, then a robust wide band (600ish to 2700ish Mhz) high gain...

Im uncertain to what your asking, but heres my thought to what Im reading..... The modem/router/hotspot itself has no direct relevance in positioning as it relates to external antennae other than, the shorter the cables the better. The antenna positioning, for signal optimization, is different and r...

Yeah, it sounds like you were paying for a $35 a month plan from someone breaking att ToS. The prepaid ipad plans are being savaged right now.

If you have an ATT phone, post pay not pre pay, you can add an ipad SIM for $20 a month.

I don't know the AT command nuances of each, but you should be able to ask Quectel sales directly if no one answers your question here. BUT..... Since IMEI number changes isnt legal in the USA, to my understanding, I would simply ask, "Are all the AT commands EXACTLY the same betweem the 06-A a...

Ive not gotten to that step. Its likely not.

My best test off my WG3526P with a Quectel EM30G inside via mpcie to m.2 adapter is 388Mbps.

Test via LAN, speedtest.net test. Average top tests 365Mbps.

Im currently saving up parts for a rpi4/em20g build

The Widest band wide band highest gain thing you can find x2, or x4 of you can. I dont know of any specifically, but ensure you have type N connectors and simply put out type Ns from the modem pigtails to your weathrlroof enclosure and a short set of LMR400 Coax antenna cables. Jim Helms of thewirel...

Using the wg3526p, with a mpcie to m.2 adapter, and the Quectel EM20G, inside a B41 tuned dual flat panel antenna enclosure, with another dual panel plugged in as well, I can test nearly 400Mbps with speedtest.net. thats with 3xCA on Sprints band 41. I think the tower AND my EM20 can do much more, b...

If I may... The WE826 and WG3526 will need a mpcie to m.2 adapter, which downgrades the usb3.0 capable speeds down to usb2.0. This will make your CAT20 modem a waste of money. The WE826 specifically only has base100 LAN ports and both the 3526 and 826 have sketchy quality wifi and typically work &qu...

No, not any router. But many do support usb tethering out of the box, Peplink is good at supporting it. Goldenorb firmware can support usb tethering depending on the build of firmware per the device.

Short answer, its possible, theres just too many variables to universally say yes.

To answer both posts about the mac.... that has no effect on the equipment. The openWRT firmware for routers "should" be able to take care of all you need via the web interface. You "may" need to use serial communication to the modem directly for certain tadks, but those needs ar...

I typically just turn off the dhcp server on the router I want to use as a wireless access point, and simply link the two routers together via a standard open LAN port

What router are you planning on using to interface your modem to?

Visable needs to stay in your phone, tbh. You have better options.

The ipad pre-paid plans are in a tiff right now, your business acct will be fine, Im sure. The Sierra Wireless MC7455 does not use band 66, that is correct. It is a great module, and can hit speeds of over 100Mbps, but it is a dated card. There are a number of bands it does not support, though it do...

I believe there is a facebook group called 'unlimited hotspot....' something or other. May want to check there. Ive not heard of a service that easily offers a true static public ip. More likely they offer a public dynamic ip. Anyway. There are more and more mvno offers out there. Sprint can be done...

Might want to try loading up in the car, use a portable inverter or similar power source, or take it to another house/work, and test it on another tower. Ensure you have top signal. Also may want to drive right up to your tower with your rig and see if it changes. Testing if its signal strength issu...

I agree, but you asked

I use narrow band flat panel mimo antennas. They work well for me, but they are just for Sprint Band41. thewirelesshaven.com sells them, but I think the wide band versions are on order now, soon to be back in stock

Niche in a single channel narrow usage kinda way

https://www.signalboosters.com/bolton-t ... l-antenna/

About as good as it gets I think

Im unfamiliar with the boosters, I dont think its needed. Its kind of a niche product

Many people have recommended simply putting the Nighthawk itself way up in the air. It has very good internal antennae and conversely the ts9 connectors are junky.

Just for giggles, I would try that first. For permanent install you mount it inside a weather tight box and power it over LAN cable. PoE

How are you using the EC25? In a router? What router? In a usb adapter? Etc

You have a booster for just band 4? Can you post info on it here?

Im not sure what you need. All the AT commands? The one to lock to certain bands? Im cornfused easily.

What firmware image is the modem using?

AT!IMPREF?

I wish I understood what transparent bridge meant :/

This is outside my wheelhouse, but just understand that with LTE cell providers you will not get a public static IP to pass through. ... Unless you like to pay up for it. You could get a public dynamic (routable) IP.

I could be wrong

I haven't used them each but Id check their websites respectively to check what bands they cover, on the data sheets. From what I've read both are very well liked and don't seem to have any issues I've read about

If it's relatively accessable I'd love to see what you get just by doing an experiment of climbing up and attaching your MOFI to the yagis with only 10' of LMR400. I'm assuming your testing your speeds hooked directly to the MOFI via LAN, through no other devices nor wifi, for your baseline speed te...

AT+GMR for currently installed firmware

Do you have a copy of the AT command guide for the EM7565? If not they are available on the Sierra Wireless website.

I've not heard of any regular commands causing a crash of the modem. BUT I don't have one of them either.

Its likely that they register/apportion the SIM to the device, thereby making the SIM "locked" to that device, much like Sprint does here. Im unfamiliar with non US providers but Ill generally assume many things apply in some way in parallels. There is a chance that the SIM 'could' be used...

Try the facebook group, lots of active people there

Also, does the SIM info populate in the GUI under Modem-->Network Status-->Modem/Sim Information

ie: Modem IMEI, SIM IMSI, SIM ICCID, SIM Phone Number

Don't post those numbers anywhere, just asking if its populated there in that section

After you set all the settings, did you fully power down the unit (unplug it) then reboot and give it approx 10 mins? Where is the SIM card from? Was it attached and transmitting data in a previous device before entering into the we826? What output do you get from entering AT!GSTATUS? in the AT comm...

My fault, overlooked detail, lost the context.

I looked at them a while back, and they were all low level CAT rated, verses buying the newer Sierra MC series modems which supported the latest LTE releases. The HAT version doesnt have a modem embedded like the shields previously. Its pretty new-ish. https://sixfab.com/product/raspberry-pi-base-h...

Could always get a WE826GO from thewirelesshaven.com and pop in a modem of your choice.

Why not flash it to the Netgear unbranded firmware?

What cellular provider is the service through and where did the SIM card for it come from? What size is the SIM card?

Are you powering the usb enclosure separately or are you relying on the usb from the pi to power it?

What firmware do they run on that router? What modem does it have inside? The router itself is a rebranded ZBT WG3526. I run mine (WG3526, with a Quectel EM20G, previously a Sierra MC7455) on Sprint, but it shouldnt be hard to get running properly on Tmobile. Do you know where your carriers towers a...

The Sim card slot on that adapter doesnt touch the modem as it seems it might, atleast not in my build it didnt. I have one installed in a WG3526 router using a Quectel EM20 modem. The SIM card slot isnt for use in routers that have SIM slots. The WE826T2/GO has its SIM slot on the outside, so it'd ...

Ya got me, misread the chart on Quectels site.

So yeah, Id say that the R850 was faster because it was rockin it on B41.

https://thewirelesshaven.com/shop/antennas/wifi-a ... o-antenna/

I use one of these, and another one that has just type N connectors mounted to the case for each antenna

I was incorrect, B41 is available on the EP-06

But you may want to check if your using B41, Modem->Network Status I believe

Or At command AT+CSQ I believe

Also the r850 can pick up B41, the Quectel EP06 does not I think I read. Sprint Band 41 is the speedy DL channel, but very capped upload, whereas the FDD, lower, channels (25,26) CAN have better upload speeds but dont match B41 DL speeds.

Are you speed testing over LAN or Wifi on tge new device?

The franklin MAY have been getting better signal. The EP06 is a more capable modem, but the hotspots can be pretty well optimized out of the box

Search found 3593 matches