Search found 212 matches

by Yipzy
Sun Sep 27, 2020 3:32 pm
Forum: Towers, Frequencies and Bands
Topic: AT Command Default for All Bands and Carrier Aggregation of EM12-G
Replies: 1
Views: 3935

Re: AT Command Default for All Bands and Carrier Aggregation of EM12-G

however when i try: AT+QCFG="band",0,9 for Band 3+3+28 it doesnt work. i only get band 1 alone. I found that default settings for the band is: AT+QCFG="band",5af0,2000001e0bb1e39df Does anyone have an idea what to do? Do you know how to set which band as primary? How did you get...
by Yipzy
Thu Sep 24, 2020 6:34 pm
Forum: Internet Service Providers
Topic: 2nd ISP addition? Need non-throttled/unlimited LTE.
Replies: 14
Views: 6807

Re: 2nd ISP addition? Need non-throttled/unlimited LTE.

You could also tether from your tablet but you still need to change TTL on the router otherwise after 15GB of hotspot use it goes down to 600Kbps. If you are able to change the TTL then it's unlimited non-throttled use unless the tower is congested during peak times.
by Yipzy
Thu Sep 24, 2020 12:15 pm
Forum: Internet Service Providers
Topic: 2nd ISP addition? Need non-throttled/unlimited LTE.
Replies: 14
Views: 6807

Re: 2nd ISP addition? Need non-throttled/unlimited LTE.

Yeah buy the cheapest LTE ipad/tablet you can find that works for Verizon then just add a tablet line if you are on Verizon postpaid. As for your Netgear wireless router, you probably need to flash to custom OpenWRT or DD-WRT in order to modify the TTL to bypass hotspot detection if you want to save...
by Yipzy
Wed Sep 23, 2020 3:46 pm
Forum: Internet Service Providers
Topic: 2nd ISP addition? Need non-throttled/unlimited LTE.
Replies: 14
Views: 6807

Re: 2nd ISP addition? Need non-throttled/unlimited LTE.

I see the WE826 is about half the price of the WG3526, what is the difference? Noticeable details: WE826 - 100Mbps port speed - WiFi is just ok. WE3526 - 1000Mbps port speed - Better WiFi, not the greatest. Do you happen to have a router other than the Netgear laying around? You don't have to get t...
by Yipzy
Mon Sep 21, 2020 2:49 pm
Forum: General and Unclassified
Topic: WG3526-P x 4x4 mimo, How ??
Replies: 2
Views: 1736

Re: WG3526-P x 4x4 mimo, How ??

Drill holes. Modify it.
by Yipzy
Mon Sep 21, 2020 2:48 pm
Forum: General and Unclassified
Topic: MOFI4500 / T-Mobile VS. Verizon Confusion. Fast Vs. Slow
Replies: 23
Views: 14747

Re: MOFI4500 / T-Mobile VS. Verizon Confusion. Fast Vs. Slow

Not necessarily. It has to do with how many devices you're behind. You just need to increase it to 66 or make custom firewall rules to do so if there isn't an option like GoldenOrb. I set mine to 67 before I could get my end user pc to ping router to get a TTL reply of 65. A TTL reply of 65 is known...
by Yipzy
Sun Sep 20, 2020 5:10 pm
Forum: Cradlepoint Routers
Topic: CBA850 no valid i.p. address
Replies: 8
Views: 6770

Re: CBA850 no valid i.p. address

You might've bricked your router during firmware update is what I think.
by Yipzy
Sun Sep 20, 2020 4:59 pm
Forum: Misc Modem Cards and Dongles
Topic: Best options for combining multiple modems on the go
Replies: 1
Views: 1404

Re: Best options for combining multiple modems on the go

I can answer about TTL. On the OMR's firewall page, there is a custom rules tab that you could enter the TTL settings like you normally would. You just need to reference to the correct interface from each WAN connection.
by Yipzy
Sun Sep 20, 2020 4:44 pm
Forum: Cradlepoint Routers
Topic: CBA850 no valid i.p. address
Replies: 8
Views: 6770

Re: CBA850 no valid i.p. address

ok, changed the network card from auto to manual and used the ip's from above. that gave me the correct info doing an ipconfig but CBA850 still would not connect and open the u.i. without doing a factory reset. i was then able to login to the u.i. but in less than a minute it disconnected and lost ...
by Yipzy
Sat Sep 19, 2020 6:00 pm
Forum: Cradlepoint Routers
Topic: CBA850 no valid i.p. address
Replies: 8
Views: 6770

Re: CBA850 no valid i.p. address

You could manually set the address to see if it would let you access it. IP: 192.168.0.5 Netmask: 255.255.255.0 Gateway 192.168.0.1 or 192.168.10.5 / 255.255.255.0 / 192.168.10.1

As for the lights, it should be in the CP manual. Look it up for your model.
by Yipzy
Sat Sep 19, 2020 4:56 pm
Forum: Internet Service Providers
Topic: T-Mobile SIM Recommendations?
Replies: 9
Views: 5496

Re: T-Mobile SIM Recommendations?

Does that TTL also apply to ipv6? Maybe increase it to TTL 65 or even 66 to test usage.
by Yipzy
Sat Sep 19, 2020 1:35 pm
Forum: Tutorials
Topic: WAN Bonding with ROOter and OpenMPTCProuter
Replies: 218
Views: 153245

Re: WAN Bonding with ROOter and OpenMPTCProuter

What VPS provider did you go with that its ips are not being blacklisted yet for streaming from Netflix? Could your excessive data be LAN instead of WAN data which doesn't matter? Mine uses very limited data on idle but I'm on the previous version and I haven't updated yet. Most of settings are at d...
by Yipzy
Sat Sep 19, 2020 1:26 pm
Forum: Nighthawks MR1100 - MR5200 (M1...M5...)
Topic: Nighthawk M1
Replies: 13
Views: 9270

Re: Nighthawk M1

I don't have another wifi device it works in my unlocked Moto g5 phone. Your need a hotspot to test. Any cheap compatible one to make sure your sim works because that's what you are having trouble with the M1 or you could try to enable hotspot from your phone and see your other devices could connec...
by Yipzy
Sat Sep 19, 2020 1:21 pm
Forum: Cradlepoint Routers
Topic: CBA850 no valid i.p. address
Replies: 8
Views: 6770

Re: CBA850 no valid i.p. address

Cradlepoint uses the modem in the usb enclosure so yes you can take that enclosure out and put in it your router to test. Since you fail to get a valid ip address from the CP, have you tried the second LAN port which is set for passthrough?
by Yipzy
Thu Sep 17, 2020 7:14 pm
Forum: Tutorials
Topic: WAN Bonding with ROOter and OpenMPTCProuter
Replies: 218
Views: 153245

Re: WAN Bonding with ROOter and OpenMPTCProuter

Ignore the message. It's fine because you are manually setting the IP for your router instead of having OMR dishing out. You could also set TTL in the firewall's custom rules just like you would before in other LTE routers with OpenWRT. You just need to reference the correct interface for each rule.
by Yipzy
Thu Sep 17, 2020 6:25 pm
Forum: General and Unclassified
Topic: MOFI4500 / T-Mobile VS. Verizon Confusion. Fast Vs. Slow
Replies: 23
Views: 14747

Re: MOFI4500 / T-Mobile VS. Verizon Confusion. Fast Vs. Slow

The 600Kbps is usually a sign that your data is being detected as hotspot data. If you put your Verizon's sim back into the phone and it doesn't throttle to 600Kbps then you know it is caused by hotspot detection.
by Yipzy
Thu Sep 17, 2020 6:23 pm
Forum: General and Unclassified
Topic: Does connection monitoring cause periodic reboots?
Replies: 3
Views: 2210

Re: Does connection monitoring cause periodic reboots?

Try to switch DNS provider instead of using the ones from your ISP. Cloudflare 1.1.1.1 & 1.0.0.1 or Google 8.8.8.8 & 8.8.4.4 will work.
by Yipzy
Thu Sep 17, 2020 5:06 pm
Forum: Internet Service Providers
Topic: In Desperate Need
Replies: 6
Views: 3112

Re: In Desperate Need

Buy the cheapest AT&T compatible LTE ipad, go with AT&T's postpaid tablet plan then put sim in your device for home connection. Set TTL to 65 for extra measure to hide hotspot usage but it's not needed for now. You could also use the ipad to tether to a router if it's fast enough for home in...
by Yipzy
Thu Sep 17, 2020 5:03 pm
Forum: Internet Service Providers
Topic: Sprint unlimited options
Replies: 11
Views: 6175

Re: Sprint unlimited options

It's sufficient if the tower is not congested. It's really bad if it is congested because band 25 is its main band. The congested tower that I have my friend connected via 25 or 26 is unusable. Thankfully 3CA B41 makes a big difference.
by Yipzy
Thu Sep 17, 2020 4:54 pm
Forum: General and Unclassified
Topic: cricket in mifi hotspot
Replies: 1
Views: 2653

Re: cricket in mifi hotspot

Sounds like you need to have a hotspot bypass in place which has to do with TTL. Search for it on the forums.
by Yipzy
Thu Sep 17, 2020 4:49 pm
Forum: Nighthawks MR1100 - MR5200 (M1...M5...)
Topic: Nighthawk M1
Replies: 13
Views: 9270

Re: Nighthawk M1

Have you tried to use the reboot function from the router's page to see if it helps to apply the new APN? Also, you could access its console to use AT commands and set APN via AT+CGDCONT manually and test it out. https://mt-tech.fi/en/enable-manual-ban ... ar-mr1100/
by Yipzy
Thu Sep 17, 2020 4:42 pm
Forum: Sierra Wireless Modems
Topic: Nighthawk M1 vs WE826 on AT&T (or other carrier)
Replies: 6
Views: 3672

Re: Nighthawk M1 vs WE826 on AT&T (or other carrier)

I would get the WE826 and save the money since you don't need the WG3526 for gigabit port.
by Yipzy
Thu Sep 17, 2020 4:38 pm
Forum: General and Unclassified
Topic: WG3526p x Telit LM960 ?
Replies: 1
Views: 1257

Re: WG3526p x Telit LM960 ?

I don't see why not.
by Yipzy
Thu Sep 17, 2020 4:38 pm
Forum: General and Unclassified
Topic: USB Port from disk share to Tether?
Replies: 1
Views: 1257

Re: USB Port from disk share to Tether?

WG3526's wifi is better than WE826 with good support. WG1608 has best wifi but 5Ghz is not working properly until patched. They all support the usb port for phone tethering.
by Yipzy
Thu Sep 17, 2020 4:31 pm
Forum: General and Unclassified
Topic: Does connection monitoring cause periodic reboots?
Replies: 3
Views: 2210

Re: Does connection monitoring cause periodic reboots?

I don't see how it would make your modem lose connection as it just does periodic ping command to make sure it gets a reply from the ip you set and without it you won't get to reconnect or reboot the router automatically. If anything it actually tries to keep your connection alive without getting di...
by Yipzy
Thu Sep 17, 2020 4:26 pm
Forum: General and Unclassified
Topic: Mofi signal strength?
Replies: 4
Views: 2704

Re: Mofi signal strength?

lawnmowerman wrote: Tue Sep 15, 2020 6:23 pm I have mofi sim7 connected to two external antennas. Anyone know how to get individual signal readings for each antenna? The signal strength meter via mofi interface is combined reading. Tried various AT commands but none worked.
Have you tried

Code: Select all

AT!GSTATUS?
assuming it's a Sierra Wireless card.
by Yipzy
Thu Sep 17, 2020 4:25 pm
Forum: Cradlepoint Routers
Topic: cradlepoint AER2200 band lock
Replies: 2
Views: 3896

Re: cradlepoint AER2200 band lock

tlkelley wrote: Thu Sep 17, 2020 8:54 am Would anyone know the correct commands for this specific modem to band lock and then set back to all bands?
The command you are looking for should be AT#BND via https://y1cj3stn5fbwhv73k0ipk1eg-wpengi ... ide_r1.pdf
by Yipzy
Thu Sep 17, 2020 4:06 pm
Forum: General and Unclassified
Topic: MOFI4500 / T-Mobile VS. Verizon Confusion. Fast Vs. Slow
Replies: 23
Views: 14747

Re: MOFI4500 / T-Mobile VS. Verizon Confusion. Fast Vs. Slow

I was getting 35-40 Mbps down with the Verizon card. I thought my problem was solved. That was until I hit my "unlimited" data cap and got throttled down to .6 Mbps. I don't know what to do now. If I could get 20-25 Mbps I'd be happy. If I could get more that would be great. Any ideas? Wh...
by Yipzy
Wed Sep 16, 2020 1:31 pm
Forum: Nighthawks MR1100 - MR5200 (M1...M5...)
Topic: Nighthawk M1
Replies: 13
Views: 9270

Re: Nighthawk M1

I have a AT&T nighthawk m1 that is unlocked I want to put my cell phone T-Mobile SIM card in the nighthawk. I have tried but it won't connect to the internet. Any help would be appreciated. I'm not real tech savvy. Did you change the APN for T-Mobile which should be fast.t-mobile.com I believe....
by Yipzy
Wed Sep 16, 2020 1:25 pm
Forum: Internet Service Providers
Topic: Issues Moving from Verizon Pre to Post Paid
Replies: 25
Views: 12132

Re: Issues Moving from Verizon Pre to Post Paid

As far as speeds, latency and streaming: Speeds/latency: I’m about 2 miles from the tower and approximately 850’ out of line of sight lower in elevation. Since venturing into the LTE home internet solution I’ve had very unpredictable speed tests across all carriers I’ve tried(Verizon, T-Mobile, AT&...
by Yipzy
Tue Sep 15, 2020 11:07 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

BigMac79 wrote: Tue Sep 15, 2020 8:45 pm Most importantly I've also completely stopped leaking hotspot data since I inserted the new custom rules and had no impact to performance. Thanks for all the help and guidance and others on the sites who have unknowingly contributed. Here's the custom rules:
That's awesome! Thanks for the update.
by Yipzy
Mon Sep 14, 2020 8:51 pm
Forum: Internet Service Providers
Topic: Issues Moving from Verizon Pre to Post Paid
Replies: 25
Views: 12132

Re: Issues Moving from Verizon Pre to Post Paid

Still worth a try with a phone sim on an always de-prioritized plan (Verizon Prepaid, Verizon Postpaid Starter, or Visible) and mobile phone instead of testing with Jetpack during congested hours then you will know whether it's the jetpack plan or the tower causing slow down.
by Yipzy
Mon Sep 14, 2020 6:35 pm
Forum: Internet Service Providers
Topic: Issues Moving from Verizon Pre to Post Paid
Replies: 25
Views: 12132

Re: Issues Moving from Verizon Pre to Post Paid

That sounds like the Jetpack which is a hotspot device has a hard LTE limit not unlimited unlike the postpaid phone plans & tablet plan so it throttles down to useless speeds except for surfing. Try with a phone sim in a phone instead without using the Jetpack. I don't see how you would get de-p...
by Yipzy
Mon Sep 14, 2020 9:31 am
Forum: Internet Service Providers
Topic: Issues Moving from Verizon Pre to Post Paid
Replies: 25
Views: 12132

Re: Issues Moving from Verizon Pre to Post Paid

Anyone have experience how much you get de-prioritized on these post pay tablet plans? Have an uncle on grandfathered prepay Verizon unlimited mifi jetpack plan and it is de-prioritized badly at night. To the point can't watch tv with it. It is tower dependent. I don't get de-prioritized at all. If...
by Yipzy
Sun Sep 13, 2020 11:51 am
Forum: Internet Service Providers
Topic: Issues Moving from Verizon Pre to Post Paid
Replies: 25
Views: 12132

Re: Issues Moving from Verizon Pre to Post Paid

Oomps wrote: Sun Sep 13, 2020 3:40 am Well...Yipzy was correct.
I had experienced it first hand. ;) If you have the option to easily switch to tablet line route, I would suggest you do that instead of going to Visible (streaming quality @ 480p) vs 1080p for tablet line without using a private proxy or vpn.
by Yipzy
Sun Sep 13, 2020 12:22 am
Forum: Internet Service Providers
Topic: Testing with SimpleMobile
Replies: 34
Views: 22604

Re: Testing with SimpleMobile

That's a slick way to word it and dropping those hints :) Maybe some of the users will figure it out. Anyway, if you don't care about higher latency. You could always give Visible with party pay ($25) a try since you are talking about Verizon. It's a hit or miss but no hard cap.
by Yipzy
Sat Sep 12, 2020 8:31 pm
Forum: General and Unclassified
Topic: 4x4 Mimo using 2 different 2x2 mimo antenna?
Replies: 3
Views: 2606

Re: 4x4 Mimo using 2 different 2x2 mimo antenna?

Yes. I used 2 different sets of antennas before.
by Yipzy
Sat Sep 12, 2020 8:26 pm
Forum: Misc Modem Cards and Dongles
Topic: SIM7920-G question
Replies: 2
Views: 1990

Re: SIM7920-G question

If it's supported through ROOTer then it is. Otherwise, you would have to be the guinea pig for it and ask for modem support via https://forums.whirlpool.net.au/thread/3vx1k1r3?p=700
by Yipzy
Sat Sep 12, 2020 8:18 pm
Forum: Misc Modem Cards and Dongles
Topic: Can a modem be flashed while in a router?
Replies: 1
Views: 1344

Re: Can a modem be flashed while in a router?

Yes look up qmi-firmware-update. I don't think it comes with ROOter firmware though. Try it and see.
by Yipzy
Sat Sep 12, 2020 8:07 pm
Forum: General and Unclassified
Topic: Samsung Galaxy S8 tethered to WG3526? ATT
Replies: 1
Views: 1463

Re: Samsung Galaxy S8 tethered to WG3526? ATT

Yes. You can use the S8 to tether. Certain plans will not allow hotspot so you have to make sure it at least allows hotspot so you could set the TTL to bypass it. If hotspot is not allowed, ie USB tethering is grayed out/disabled on your phone when sim is inserted, you might need to root the phone a...
by Yipzy
Sat Sep 12, 2020 7:58 pm
Forum: General and Unclassified
Topic: WG3526 WiFi Connection Issues
Replies: 19
Views: 12972

Re: WG3526 WiFi Connection Issues

Also, change the channel number to a different one and restart everytime. I had a lot of trouble with getting a 5Ghz channel number to stick and broadcast the wifi ID.
by Yipzy
Fri Sep 11, 2020 10:11 pm
Forum: Cradlepoint Routers
Topic: Calyx Sim in a AER1600-LP6
Replies: 2
Views: 3946

Re: Calyx Sim in a AER1600-LP6

You are going to have a bad time with Cradlepoint due to the way they have the Sierra Wireless modems set up. It will switch to Sprint firmware automatically and so far no one has figured out how to disable that in order for your Calyx sim to work on generic firmware. Search on the forums. Many peop...
by Yipzy
Wed Sep 09, 2020 7:55 pm
Forum: Internet Service Providers
Topic: Issues Moving from Verizon Pre to Post Paid
Replies: 25
Views: 12132

Re: Issues Moving from Verizon Pre to Post Paid

gscheb wrote: Wed Sep 09, 2020 3:53 pm So just to confirm, this will work with a Sierra Wireless MC7455 modem?
I'm not sure but it's not a phone sim. Phone sim isn't compatible with MC7455. Tablet line sim tends to work. Search around the forums.
by Yipzy
Wed Sep 09, 2020 1:12 pm
Forum: Internet Service Providers
Topic: Issues Moving from Verizon Pre to Post Paid
Replies: 25
Views: 12132

Re: Issues Moving from Verizon Pre to Post Paid

Wondering if anyone can give me some advice on getting this Verizon tablet plan? Have some people that might want to try it out. What plan is it? What is the settings to get it to work on a MC7455? Know they have Verizon phone service now. Thanks I had it on Do More Unlimited for the $10 tablet lin...
by Yipzy
Tue Sep 08, 2020 7:30 pm
Forum: Towers, Frequencies and Bands
Topic: Using T-Mobile 600 Mhz. Band 71?
Replies: 16
Views: 11588

Re: Using T-Mobile 600 Mhz. Band 71?

I got an EC25-AF but I'm using it on a laptop in Windows 10. Even if it won't do CA it connects at 150 Mb and is still plenty fast although I don't think there is any way to tell what band it's using. Where I can get T-Mo B71 on a phone it's just as weak and slow as the other bands and turned out t...
by Yipzy
Tue Sep 08, 2020 5:15 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

I would imagine so if others didn't have problem with it. It's also the reason you are leaking hotspot data.
by Yipzy
Tue Sep 08, 2020 4:36 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

BigMac79 wrote: Tue Sep 08, 2020 4:34 pm Do you still think I need to reflash with another version given there are no errors?
Has the TTL respond with different number other than 64 after reboot?
by Yipzy
Tue Sep 08, 2020 4:22 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

Just for my learning, you can not just retype in the custom settings for the iptables with the correct configuration? I was the one that typed in the one's that are shown in the Custom Rules section. Your custom settings are right. It's the iptables applying the settings. If you are feeling adventu...
by Yipzy
Tue Sep 08, 2020 4:01 pm
Forum: Sierra Wireless Modems
Topic: EM7511 -> MC400-600M-C-AT
Replies: 10
Views: 8843

Re: EM7511 -> MC400-600M-C-AT

calimansi wrote: Tue Sep 08, 2020 2:11 pm EM7511-CP did not work.

Anyone have a MC400-600M that's willing to share?
I haven't seen anyone mentioned this. Most people just swap their MC7455 with EM7565 & EM7511 like you. Have you asked on facebook group?
by Yipzy
Tue Sep 08, 2020 3:51 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

When I run it I get this in return. Exactly as is written in WiFix. # This file is interpreted as shell script. # Put your custom iptables rules here, they will # be executed with each firewall (re-)start. # Internal uci firewall chains are flushed and recreated on reload, so # put custom rules int...
by Yipzy
Tue Sep 08, 2020 3:30 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

When I run this from the current session in the terminal I get this response: root@WiFiX:~# /etc/firewall.user -ash: /etc/firewall.user: Permission denied That's just a path to the file. You need to issue a command before it to let it know what you want to do with it. Like cat to paste file content.
by Yipzy
Tue Sep 08, 2020 3:20 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

And this is what shows when enter cat /etc/firewall.user #start TTL rules iptables -t mangle -I POSTROUTING -o wwan0 -j TTL --ttl-set 117 iptables -t mangle -I PREROUTING -i wwan0 -j TTL --ttl-set 117 ip6tables -t mangle -I POSTROUTING -o wwan0 -j HL --hl-set 117 ip6tables -t mangle -I PREROUTING -...
by Yipzy
Tue Sep 08, 2020 2:37 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

Would I see this in the AT-Command Execution (modem debug information) section? If so, I don't see anything in there with this information. The "terminal" I referenced for my ping was the terminal on my Mac Book. I didn't see that code in there either. I'm not sure. I haven't been using L...
by Yipzy
Tue Sep 08, 2020 2:08 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

BigMac79 wrote: Tue Sep 08, 2020 1:57 pm Yes. running GoldenOrb_2020-05-16
Do you see your custom rules via

Code: Select all

cat /etc/firewall.user
in terminal? If so, type

Code: Select all

/etc/init.d/firewall restart
Does it say "* Running script '/etc/firewall.user'" at the end of the process?
by Yipzy
Tue Sep 08, 2020 1:48 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

I unchecked Enable TTL, hit save/apply, verified Custom Rules still good and then rebooted. Still ping as TTL 64 I rechecked enable TTL, hit save/apply, verified Custom Rules still good and then rebooted. Still ping as TTL 64 From my terminal after running ping: icmp_seq=11 ttl=64 time=18.553 ms ic...
by Yipzy
Tue Sep 08, 2020 12:59 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

BigMac79 wrote: Tue Sep 08, 2020 11:12 am Apologies, it says "wwan0"
Hm. That's the correct interface that goes with your settings. Not sure why the router is not applying them properly. Do you have TTL enabled? Try to uncheck it but make sure those 4 lines are in custom rules then apply and reboot.
by Yipzy
Tue Sep 08, 2020 10:48 am
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

BigMac79 wrote: Tue Sep 08, 2020 7:18 am Here's what WAN1 has for IPv:
Protocol: MBIM
It should be just a word right under WAN1 and the plug icon.
by Yipzy
Tue Sep 08, 2020 1:02 am
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

BigMac79 wrote: Mon Sep 07, 2020 10:51 pm By "uncomment" you mean remove the '#' before it? If so, I did that, rebooted and still get a TTL64 when I ping it.
Yeah. Maybe your network interface wwan0 is incorrect. Go to Network -> Interfaces and see what does it say in the WAN1 plug box?
by Yipzy
Mon Sep 07, 2020 10:36 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

BigMac79 wrote: Mon Sep 07, 2020 10:29 pm Using WG3526P with EM12 modem and Verizon sim. Originally I was using TTL 117 and thought it was working.

#ip6tables -t mangle -I POSTROUTING -o wwan0 -j HL --hl-set 67
#ip6tables -t mangle -I PREROUTING -i wwan0 -j HL --hl-set 67
Uncomment those 2 lines should fix your problem.
by Yipzy
Mon Sep 07, 2020 10:17 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

BigMac79 wrote: Mon Sep 07, 2020 10:12 pm I tried changing the TTL and Custom Rules to 65, 66 and 67 and the ping comes back 64 every time. I rebooted after each change also. Any thoughts?
Paste your settings here. Are you tethering with a hotspot/phone or using a modem inside the router?
by Yipzy
Mon Sep 07, 2020 10:13 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

BigMac79 wrote: Mon Sep 07, 2020 9:37 pm Figured out how to Ping from my MAC. Came back 64. Not sure why since I’ve changed TTL to 117 and router shows 117 for ipv4 and ipv6.
Then the settings aren't being applied. Try to restart the router.
by Yipzy
Mon Sep 07, 2020 9:03 pm
Forum: Misc Modem Cards and Dongles
Topic: New to forum. Currently using a mofi4500
Replies: 126
Views: 67885

Re: New to forum. Currently using a mofi4500

So even with TTL set to 117 and the DNS settings (using cloudfare) I’m still “bleeding” through a bit of Hotspot data vs 100% device data. Is this normal or do I need to change something else? Hotspot data showing about 1GB of increase every couple days vs. device data of about 3GB. I’m throttled t...
by Yipzy
Mon Sep 07, 2020 12:15 am
Forum: Internet Service Providers
Topic: Issues Moving from Verizon Pre to Post Paid
Replies: 25
Views: 12132

Re: Issues Moving from Verizon Pre to Post Paid

Interesting thought, can't wait to see what they say on the phone tomorrow lol...Any tips on getting a postpaid tablet sim if I don't have a tablet to use it in? I assuming like most of Verizon they want the IMEI up front before I can even view plan options. How much did the tablet plan cost you, i...
by Yipzy
Mon Sep 07, 2020 12:05 am
Forum: ZBT Routers
Topic: Troubles upgrading MoFi 4500 (WE826) with LM960
Replies: 1
Views: 2083

Re: Troubles upgrading MoFi 4500 (WE826) with LM960

lynyrd65 wrote: Sun Sep 06, 2020 11:17 am I'm trying to upgrade my MoFi with an LM960. I've flashed the latest GoldenOrb for the WE826 but it doesn't recognize the LM960 I've installed in the mPCIe slot. Is there a compatibility issue I've overlooked?
Try to put it in MBIM mode if not already.

Code: Select all

AT#USBCFG=?
AT#USBCFG?
AT#USBCFG=2
by Yipzy
Sun Sep 06, 2020 4:37 am
Forum: Internet Service Providers
Topic: Issues Moving from Verizon Pre to Post Paid
Replies: 25
Views: 12132

Re: Issues Moving from Verizon Pre to Post Paid

Thanks Yipzy, I didn't have a whole lot of time to troubleshoot today and haven't checked the firmware just yet. But I think I'm closer to figuring out the issue. What I'm seeing here is the postpaid phone sim will not work with the 7455 modem or sierra modems because they are getting flagged as ho...
by Yipzy
Sat Sep 05, 2020 5:18 pm
Forum: Internet Service Providers
Topic: Visible + EC25-AF + GoldenOrb doesn't connect to LTE
Replies: 34
Views: 33733

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

vallkor wrote: Sat Sep 05, 2020 10:38 am Thanks again!
Great! If you see someone with similar issue with Quectel + Verizon/Visible/MVNOs. Kindly refer to this solution. Thanks.
by Yipzy
Sat Sep 05, 2020 5:16 pm
Forum: Internet Service Providers
Topic: Issues Moving from Verizon Pre to Post Paid
Replies: 25
Views: 12132

Re: Issues Moving from Verizon Pre to Post Paid

Oomps wrote: Sat Sep 05, 2020 12:53 am Does anyone have any suggestions? Am I doing anything obviously wrong?
What's the current firmware? Type

Code: Select all

AT!ENTERCND="A710"
AT!IMPREF?
by Yipzy
Sat Sep 05, 2020 5:12 pm
Forum: Sierra Wireless Modems
Topic: EM7511 -> MC400-600M-C-AT
Replies: 10
Views: 8843

Re: EM7511 -> MC400-600M-C-AT

calimansi wrote: Sat Sep 05, 2020 10:29 am Can someone post at!usbinfo? of a MC400-600M-C-AT?
MC7455 is MC7455-CP so try EM7511-CP?
by Yipzy
Sat Sep 05, 2020 5:03 pm
Forum: Misc Modem Cards and Dongles
Topic: Issue connecting to Sprint Towers, Not registering
Replies: 5
Views: 2948

Re: Issue connecting to Sprint Towers, Not registering

What about x.ispsn and n.ispsn? Maybe T-Mobile is working on the tower due to merger and it's a temporary issue only. Perhaps this warrants a call to find out.
by Yipzy
Fri Sep 04, 2020 9:00 pm
Forum: Misc Modem Cards and Dongles
Topic: Issue connecting to Sprint Towers, Not registering
Replies: 5
Views: 2948

Re: Issue connecting to Sprint Towers, Not registering

mattvds wrote: Fri Sep 04, 2020 8:50 pm Interesting theory. I have a spare WG device with mc7455 around, I'll try with that. Oddly it was working for months on the other tower...
You could just check with

Code: Select all

AT!ENTERCND="A710"
AT!IMPREF?
or check the firmware page on CBA850.
by Yipzy
Fri Sep 04, 2020 8:56 pm
Forum: General and Unclassified
Topic: Wanted: Verizon Data SIM, unlimited, unthrottled
Replies: 5
Views: 3085

Re: Wanted: Verizon Data SIM, unlimited, unthrottled

Does anyone know where I can get an unlimited, unthrottled Verizon data SIM card?? You mean Verizon's postpaid tablet sim? You are still subject to deprioritization if the tower is congested even on unlimited after certain threshold. Only way to know is test Verizon speed during peak hours after th...
by Yipzy
Fri Sep 04, 2020 8:36 pm
Forum: Misc Modem Cards and Dongles
Topic: Issue connecting to Sprint Towers, Not registering
Replies: 5
Views: 2948

Re: Issue connecting to Sprint Towers, Not registering

Anybody have any ideas? I suspect your Cradlepoint is using the Sprint firmware of the modem. Therefore you are having issues as the IMEI on the EM7565 is not provisioned for you to just swap from Calyx's hotspot. You must use the generic version of the firmware to get it to registered but the prob...
by Yipzy
Thu Sep 03, 2020 8:43 pm
Forum: General and Unclassified
Topic: MOFI 4500 with EM7565 Modem
Replies: 10
Views: 7187

Re: MOFI 4500 with EM7565 Modem

eschmid2 wrote: Thu Sep 03, 2020 10:47 am Does this new modem EM7565 require a power supply adaptor upgrade from what is provided with the MOFI4500? If so what is recommended? Thanks!
At least 2.5A but go with 3A if you will be buying one.
by Yipzy
Thu Sep 03, 2020 8:37 pm
Forum: Internet Service Providers
Topic: Sitrep: AT&T/TMobile Service Providers
Replies: 7
Views: 4328

Re: Sitrep: AT&T/TMobile Service Providers

Who do you use for personal cell phone plan? Are you using those 2 plans in cellphones via USB tethering? I personally would ditch Ubifi.net and get the AT&T postpaid tablet plan unlimited for $20+tax. Use the money saved to buy hardware. AT&T will crack down but no one knows when but at lea...
by Yipzy
Thu Sep 03, 2020 12:22 am
Forum: General and Unclassified
Topic: Verizon carrier reject on CBA850 with MC400LP6(anyone else have this working?)
Replies: 30
Views: 13685

Re: Verizon carrier reject on CBA850 with MC400LP6(anyone else have this working?)

Try to factory reset the router then flash again. If still unable to, try

Code: Select all

AT!ENTERCND="A710"
AT!RMARESET=1
AT!RESET
if AT commands work?

Go to advanced search